Connects2 Vision CAM-14 Manual de usuario

www.c2vision-eu.com

Image Sensor: 1099 HD CCD

TV Lines: 560

Resolution: 976 x 496

Minimum Illumination: 0.1 Lux

TV System: NTSC

Waterproof Rating: IP68

Horizontal Angle: 170 Degrees

Vertical Angle: 120 Degrees

Parking Lines: Yes (Removable)

Image Adjustment: Yes (Mirror/Normal)

Enhanced Performance In Low Light: Yes

Video Output: 1.0V p-p 75ohm

Operating Voltage: 12V DC (Negative Ground)

Current Consumption: 117mA @ 13.8V

Operating Temperature: -20 Degrees C to +70 Degrees C

User Manual

Prior to Installation

Read the manual prior to installation. Technical knowledge is necessary for installation.

Please ensure you use the correct tools to avoid damage to the vehicle or product.

Connects2 can not be held responsible for the installation of this product.

Technical Support

Connects2 want to provide a fast and suitable resolution should you encounter any

technical issues. With this in mind, when contacting Connects2, try to provide as much

Information as possible. This will speed up the process and help us to help you.

Please use our dedicated online technical support centre: support.connects2.com

Universal Flush Mount Camera

Mini Rear View Camera (Drill to Fit)

PRODUCT FEATURES:

DISCLAIMER:

CAM-14

Connects2Vision

www.c2vision-eu.com

CONTENTS

• Camera with 1m cable to mini Male 6 pin connector

• 1m camera connection cable with mini Female 6 pin connector and RCA

Female connector

• 6m RCA Male to Male extension cable

• 15.5mm Hole Saw

• Instructions

INSTALLATION

1. Connect the Black wire to a suitable ground and the Red wire to a switched

+12V supply.

2. If the camera is to be used in the rear of the vehicle, the Red wire should

be connected to the reversing light circuit or an interface which provides a

reverse signal.

3. Select a suitable location for the camera and ensure that the area is free

from all cables, fuel & oil. Whenever possible, avoid locations that are subject

to road dirt & water spray.

4. Aim to mount the camera preferably 45-60cm from the ground and cut a

suitable hole using the cutting tool provided.

5. Using the supplied video cable, connect the camera to the display screen

and ensure that the image is displayed correctly.

6. Rotation of the camera may be required to ensure that the correct orientation

of the image is achieved.

7. To swap the image from mirror to normal view, cut the small White looped

wire which is located on the camera connection cable.

8. To remove the parking line feature, cut the small Blue looped wire which is

located on the camera connection cable.

Subscribe to our YouTube Channel for installation

guides and tips... www.youtube.com/connects2

Tabla de contenidos

Otros manuales de Cámara de salpicadero de Connects2

Connects2

Connects2 CAM-AU5 Manual de usuario

Connects2

Connects2 Vision AM-44 Manual de usuario

Connects2

Connects2 Vision CAM-KIT7 Manual de usuario

Connects2

Connects2 Vision CAM-34 Manual de usuario

Connects2

Connects2 CAM-VW9.2 Manual de usuario

Connects2

Connects2 CAM-ST1 Manual de usuario

Connects2

Connects2 Vision CAM-37 Manual de usuario

Connects2

Connects2 CAM-FD14 Manual de usuario

Connects2

Connects2 CAM-JG1-AD Manual de usuario

Connects2

Connects2 Vision CAM-16 Manual de usuario

Connects2

Connects2 CAM-FD24 Manual de usuario

Connects2

Connects2 CAM-PO1-AD Manual de usuario

Connects2

Connects2 CAM-30 Manual de usuario

Connects2

Connects2 CAM-SK3 Manual de usuario

Connects2

Connects2 Connects2Vision CAM-LR2-AD Manual de usuario

Connects2

Connects2 CAM-VW8 Manual de usuario

Connects2

Connects2 Vision CAM-26 Manual de usuario

Connects2

Connects2 CAM-SK2-AD Manual de usuario

Connects2

Connects2 CAM-AU6 Manual de usuario

Connects2

Connects2 CAM-VW1-AD Manual de usuario

Connects2

Connects2 CAM-1 Manual de usuario

Connects2

Connects2 CAM-MB9 Manual de usuario

Connects2

Connects2 CAM-KIT8 Manual de usuario

Connects2

Connects2 CAM-CT1 Manual de usuario

Manuales populares de Cámara de salpicadero de otras marcas

Cansonic

Cansonic UltraDuo Z2 Manual de usuario

Gazer

Gazer F720 Manual de usuario

HP f500g Manual de usuario

Xblitz

Xblitz TANGO 4K Manual de usuario

Rexing

Rexing M1 Manual de usuario

Maka Technologies

Maka Technologies Marbella MXPro Manual de usuario

NESA

NESA NRC-80DLM Instrucciones de instalación y funcionamiento

Kaiser Baas

Kaiser Baas R20 Manual de usuario

Boyo

Boyo VTM43TC Manual de usuario

Minolta

Minolta MNCD37 Manual de usuario

Thinkware

Thinkware FA10 Manual de usuario

Momento

Momento MD-5200 Manual de usuario

BlackVue

BlackVue DR590X-1CH Manual de usuario

HP F300 Manual de usuario

CammSys

CammSys BlackSys BH-300 Manual de usuario

Snooper

Snooper DVR-2HD Manual de usuario

Lukas

Lukas Q900 Manual de usuario

RVS

RVS 450C Manual de usuario