Component Solution Services Verity REC02U Manual de usuario
REC02U Mobile DVR
USER MANUAL
Distributed by Verity Rear Vision
A division of
Component Solution Services, LLC.
56600 Twin Branch Dr.,
Mishawaka, IN 46545
www.verityrvs.com
Please read this manual completely before operating the SYSTEM
2018 Verity Rear Vision Systems / All rights reserved / Subject to Change
Component Solution Services LLC., offers the Verity
Rear Vision Systems® to meet any requirements and
price point within the trucking, specialty vehicles, and
RV industry. Verity Rear Vision Systems®is also
home to the Supreme View®line of specialty format
systems. Our standard cabled systems offer
unparalleled features into the trucking and RV
industries. Designed for professional drivers, Verity
Rear Vision Systems develops and markets products
and applications to transmit video, audio, and data
either individually or in any and all combinations. The
company has also developed, manufactured, and
marketed different kinds of personal and vehicle video
cameras, DVRs, and accessories for the commercial
transportation, fire/rescue, and marine OEM markets.
Think safety
First
Read our manual before operating
or installing.
Most likely, your system came preinstalled, so the installation
section would be for reference.
Thank you for your purchase of our Verity Rear Vision
Systems®. When installed and used properly, your REC02U
is designed to deliver you years of trouble-free operation. This
manual contains important information required to properly
install and operate the unit. Verity Rear Vision Systems are
designed for quick installation by trained professionals in
proper installation environments. Our designs are based on
decades of working with vehicle manufacturers.
Verity Rear Vision Systems products are intended to be
installed as a supplement and our observation systems and/or
products are not intended for use as substitutes for rear-view
mirror devices, or for any other standard motor vehicle
equipment which may be required to be installed on vehicles
by law. Verity rear Vision Systems products promote
improving the vehicle operator’s field of view. Our products
are no substitute for proper defensive driving techniques,
observance of traffic laws and motor vehicle safety
regulations.
Installation Location
It is unlawful in most locals for any person to drive a motor
vehicle equipped with a television viewer/screen located at
any point forward of the back of the driver’s seat (or in any
location that is visible, directly or indirectly), to the driver while
operating the vehicle. Our systems are designed to be used
primarily as a rear observation device.
DO NOT OPEN ANY COMPONENT. There are no
serviceable parts inside any of the components of the Verity
Rear Vision products. Opening the product will break the
tamper indicators and void the warranty. Contact our tech
support if a problem should arise 574-807-6002. For faster
response, fill out a service ticket found on our website.
www.verityrvs.com
WARNING
Do not place heavy objects on cables or cover
them with carpet or mats.
Do not place cables where they can be
crushed in any manner.
Our systems are designed as a driving aid.
Watching videos, broadcasts, DVDs and/or any
images other than intended driving assistance
cameras is prohibited.
CAUTION
To avoid damage to the electronic circuit, stop
using this product while doing welding work to
the vehicle and/or trailers.
Never immerse any component in water, and
do not employ spray cleaners. When cleaning,
use a damp lint-free cloth only.
Connect this unit only to other compatible
devices.
Although our products have built-in surge and
cross polarity protection, make sure all cables
are connected properly; improper cable
connections may damage the camera and the
monitor.
Cables should not be allowed to touch hot or
rotating parts, such as the engine, ventilator,
etc.
Do not locate the monitor near heat generating
vents or devices.
Turn off power to the monitor when connecting
the camera.
Monitors are not designed to be waterproof. (Our
SM07F waterproof monitor is the exception).
Exposure to water, such as rain, may damage the
unit.
SYSTEM FEATURES
The REC02U is a DVR designed for Analog HD vehicle monitoring. It has a
built-in high-performance image processor with advanced H.264 video
compression technology. This unit it provides AHD video recording, storage
and playback solution. Options could include: built-in 3G/4G/Wi-Fi module
for remote monitoring, analysis and management. It comes with smart power
management system which can recognize the power type automatically.
When detected that the battery’s voltage is lower than the given value, the
device will shut down automatically and keep ultralow standby consumption.
Built-in high performance Hisilicon chipsets, coded with H.264
standard, high compression rate and high definition image quality
4CH AV Inputs with AHD 720P/960H/D1/CIF optional, 1CH
synchronized AV output
4CH local recording with 720P resolution in real time
Power:
Professional In-Vehicle power design, 10-36V DC Wide Voltage
Range
Multi protection circuits such as under-voltage, short, reversed
plug-in
Smart power management system, shutdown under extremely low
voltage (-6 volts +/-), low consumption
Data Storage:
Special file management system to encrypt and protect the data
Proprietary technology to detect the bad track over long life span of
the hard drive which ensures continuity of video and long service
life of the hard drive
Built-in ultracapacitor, to avoid data loss and sd card damage
caused by sudden outage
Support 2.5-inch HDD/SSD, maximum 2TB (Optional, not Included)
Support SD card storage, maximum 256GB (Optional, not included)
Support SD card storage, 128GB INCLUDED
Transmission Interface: (Optional)
Specifications:
System main processor Hi3520 DV200
Operating system Embedded Linux OS
Operating language English/Chinese
Operating interface GUI, support mouse
Password security User password/Admin password
Audio & Video
Video standard NTSC default PAL
Video compression H.264
Image resolution 720P /960H/D1/CIF
Playback quality 720P /960H/D1/CIF
Compound mode 4ch 720P/4ch 960H/2ch 720P+2ch 960H
Decoding ability 1ch 720P real time
Recording quality 6 optional levels
Image display Single/QUAD display optional
Audio Compression G.726
Audio recording Audio & Video synchronized recording
Recording & Playback
Recording mode Manual/Preset Start Mode
Video bit rate Full frame 4096Mbps，
Audio bit rate 8KB/s
Storage media SD card + HDD/SSD storage
Local playback Playback by file size
Input properties
AV input 4-ch aviation interface
AV output 1-ch VGA video output, 1ch aviation AV output
Alarm input 4 digital inputs (2 Positive trigger, 2 Positive/Negative
trigger)
HDD/SSD 1 HDD/SSD (up to 2TB, support hot plug/unplug)
SD card 1 SDXC High speed card (up to 256GB)
USB interface 1 USB 2.0 (support U disk/mouse)
Ignition input 1 ACC signal
LED Indication PWR/RUN
Disk lock 1
Power / Temperatures
Power input 10~36V DC
Power output 5V 300mA
Power consumption Standby 3mA
Maximum consumption 18W @12V 1.5A @24V 0.75A
Working temperature -20 --- 70℃
Storage 720P 1G/h/channel
960H 750M/h/channel
Dimension 162 mm x 153 mm x 52 mm
SYSTEM OVERVIEW
Important: Make sure remote is facing the front of the DVR during
remote operations
ESCAPE
UP / DOWN
RIGHT / LEFT
ENTER /
SELECT
USER LOGIN
Click the menu button on the remote; the login interface will appear.
Please input your UserName, Password, and select your language,
click “OK” to login the menu. (The default UserName is admin,
without a password.) If you have not set these values you can use
the right arrow button to pass through these.
Once you have passed this step the menu button will bring up the
following drop-down menu
One View: 1 Camera option
Multi View: Show multi-camera options
Play Back: Open play back viewer
Backup: Backs up to thumb or external drive
Pause: Allows time to get some cold water
Menu: Opens operational options
MAIN MENU
Basic: Date, Time, Vehicle information, Preview setting, Ignition
time (activation) on/off, System information
Network: Optional settings for DVRs with WI-FI and 3G/4G modes
and Netstate
Record: Model, Mainstream, Sub stream, Record ODS, Image,
Storage, IPC (i.e., Internet Protocol camera)
Advanced: Some features optional. User management, Driver
habits, UART, Rear Camera, Net: Text Shown
Maintenance: Log, Disk mange (Include disk formatting) Config
(export/import settings, restore), Upgrade
Alarms: All related alarm settings
Wizard: Wi-fi /3d/4d option setup
MENUS
Time and Date Settings. Be sure to hit “OK” when done
BASICS
Otros manuales para Verity REC02U
1
Tabla de contenidos
Otros manuales de DVR de Component Solution Services
