Compaq AlphaServer GS140 Manual de usuario

AlphaServer GS140

Getting Started with Logical Partitions

Order Number: EK–TUNLP–SF

This document describes the hardware configuration rules and

the console firmware commands and environment variable

settings needed to run multiple instances of an operating system

on Compaq AlphaServer GS140 systems.

First Printing, May 1999

The information in this publication is subject to change without notice.

COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR

EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING,

PERFORMANCE, OR USE OF THIS MATERIAL. THIS INFORMATION IS PROVIDED

“AS IS” AND COMPAQ COMPUTER CORPORATION DISCLAIMS ANY WARRANTIES,

EXPRESS, IMPLIED OR STATUTORY AND EXPRESSLY DISCLAIMS THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE,

GOOD TITLE AND AGAINST INFRINGEMENT.

This publication contains information protected by copyright. No part of this publication may be

photocopied or reproduced in any form without prior written consent from Compaq Computer

Corporation.

The software described in this guide is furnished under a license agreement or nondisclosure

agreement. The software may be used or copied only in accordance with the terms of the

agreement.

COMPAQ and the Compaq logo are registered in United States Patent and Trademark Office.

Tru64 is a trademark of Compaq Computer Corporation. AlphaServer and OpenVMS are

trademarks of Digital Equipment Corporation. UNIX is a registered trademark in the U.S. and

other countries, licensed exclusively through X/Open Company Ltd.

Microsoft and Windows NT are registered trademarks of Microsoft Corporation.

Other product names mentioned herein may be the trademarks of their respective companies.

iii

Contents

Preface vii

Chapter 1 Introduction

1.1 Reasons for Partitioning 1-2

1.2 Important Considerations for Partitioned Systems 1-4

1.3 Overview of the Partitioning Process 1-6

Chapter 2 Configuration Rules

2.1 Overview of Configuration Requirements 2-2

2.2 Example of a Partitioned System 2-4

2.3 Module Configuration 2-6

2.4 Memory Allocation 2-8

2.4.1 Two Partitions 2-8

2.4.2 Three Partitions 2-10

2.5 DWLPB PCI Card Cages and Hose Connections 2-12

2.6 KFE72-DA Adapters and Attached Console Terminals 2-14

2.7 CD-ROM Drives for Secondary Partitions 2-16

2.8 Attaching Floppy Drives for Secondary Partitions (Optional) 2-18

2.9 Moving One Floppy Drive Between Partitions 2-20

Chapter 3 Environment Variable Settings

3.1 Environment Variables Used 3-2

3.2 Detailed Directions for lp_cpu_mask 3-4

3.3 Detailed Instructions for lp_io_mask 3-8

Chapter 4 Setting Up, Initializing, and Booting Logical

Partitions

4.1 Primary Console: Check Configuration 4-2

4.2 Step 1: Create and Initialize Environment Variables from the

Primary Console 4-6

4.3 Step 2: Initialize Partitions from the Primary Console;

Boot/Install OS in Partition 0 4-8

4.4 Step 3: Set and Initialize Environment Variables,

Boot/Install from Secondary Consoles 4-10

Chapter 5 Tips and Troubleshooting

5.1 Setting auto_action Within Partitions 5-2

5.2 How to Stop a Hung Secondary Partition 5-4

5.2 Halting All Partitions to Reconfigure 5-6

5.3 Correcting Errors in Environment Variables 5-8

5.4 Using Tools to Debug a Partition 5-10

Index

Examples

4-1 Check Configuration from Primary Console 4-2

4-2 Initial Commands from the Primary Console 4-6

4-3 Initializing the Partitions 4-8

4-4 Using the Secondary Consoles 4-10

5-1 Halting a Hung OS Instance in Partition 0 5-4

5-2 Halting a Hung OS Instance in Secondary Partitions 5-4

5-3 All Consoles: Shut Down Operating System 5-6

5-4 Primary Console: Disable Partitions and Reset EVs 5-6

5-5 Correcting a Bad Bit Mask 5-8

Figures

1-1 Maintaining Multiple Instances at Separate Consoles 1-1

1-2 Consolidating Resources by Using Partitioning 1-2

1-3 Reset: Use Caution with Partitioned Systems 1-4

1-4 Overview of Using Logical Partitions 1-6

2-1 Example Configuration (Front View of Cabs) 2-4

2-2 Example Configuration (Rear View of Cabs) 2-5

2-3 Module Configuration 2-6

2-4 Memory Allocation with Two Partitions 2-8

2-5 Memory Allocation with Three Partitions 2-10

2-6 DWLPB PCI Card Cages 2-12

2-7 Hose Numbering Scheme for I/O Modules 2-13

2-8 KFE72-DA Adapters 2-14

2-9 Placement of RRDxx-VA Disks 2-16

2-10 Floppy Drive Connector on KFE72-DA Adapter 2-18

2-11 Relevant Connectors on KFE72s and DWLPBs 2-20

3-1 Environment Variables and lpinit Command 3-2

3-2 Construction of Three-Partition CPU Bit Mask 3-4

3-3 Construction of Two-Partition CPU Bit Masks 3-6

3-4 Construction of Three-Partition I/O Bit Masks 3-8

3-5 Construction of Two-Partition I/O Bit Masks 3-9

5-1 Setting auto_action to Halt in Each Partition 5-2

5-2 Debugging One Partition 5-10

Tables

1 Related AlphaServer GS140 Documentation viii

2-1 Requirements for a Three-Partition System 2-2

2-2 Requirements for a Two-Partition System 2-3

3-1 Environment Variables for Logical Partitions 3-3

vii

Preface

Intended Audience

This manual is written for anyone wishing to understand the concepts and

requirements of logical partitions for a Compaq AlphaServer GS140 system, as

well as how to use the console firmware to define them.

Document Structure

This manual uses a structured documentation design. Topics are organized into

small sections for efficient online and printed reference. Each topic begins with

an abstract. You can quickly gain a comprehensive overview by reading only

the abstracts. Next is an illustration or example, which also provides quick

reference. Last in the structure are descriptive text and syntax definitions.

This manual has five chapters, as follows:

•Chapter 1, Introduction, gives an overview of logical partitions.

•Chapter 2, Configuration Rules, describes the hardware you need to run

logical partitions.

•Chapter 3, Environment Variable Settings, describes the environment

variables used to define logical partitions for an operating system.

•Chapter 4, Setting Up, Initializing, and Booting Logical Partitions ,

describes the sequence of console firmware commands you need to use to

enable logical partitioning and boot/install the operating system.

•Chapter 5, Tips and Troubleshooting, gives pointers on how to perform

common operations, correct problems, and run tools to debug a partition.

viii

Documentation Titles

Table 1 lists the books in the AlphaServer GS140 documentation set and

operating system documentation that you may find useful.

Table 1 Related AlphaServer GS140 Documentation

Title Order Number

Hardware User Information and Installation

Operations Manual EK–T8030–OP

Service Information Kit QZ–00RAC–GC

Service Manual (hard copy) EK–T8030–SV

Service Manual (diskette) AK–QKNFB–CA

AK-QUW7B-CA

AK-QUW6B-CA

Reference Manuals

System Technical Manual EK–T8030–TM

System Technical Manual Supplement: CPU EK–T8030–TS

System Technical Manual Supplement: Memory EK–MS7CC–TS

DWLPA/DWLPB PCI Adapter Technical Manual EK–DWLPA–TM

Upgrade Manuals

KN7CG CPU Installation Card EK–KN7CG–IN

MS7CC Memory Installation Card EK–MS7CC–IN

KFTHA System I/O Module Installation Card EK–KFTHA–IN

KFTIA Integrated I/O Module Installation Card EK–KFTIA–IN

AlphaServer 8400 Upgrade Manual EK–T8430–UI

DWLPA/DWLPB PCI PIU Installation Guide EK–DWL84–IN

KFE72 Installation Guide EK–KFE72–IN

Software Manuals

Tru64 UNIX Installation Guide

Tru64 UNIX System Administrator’s Guide

Tru64 UNIX Release Notes

DECevent Installation Guide AA–DECUX–IN

Introduction 1-1

Chapter 1

Introduction

Partitioning is defined as the capability to run multiple copies, or instances, of

an operating system on one hardware system. Each instance is maintained at a

separate console monitor, as shown for two partitions in Figure 1–1. The

AlphaServer GS140 system supports up to three partitions.

Figure 1–1 Maintaining Multiple Instances at Separate Consoles

BX0502C-99

Primary Console

Secondary Console

Tru64 UNIX

running on

1 CPU module

1 2-Gbyte memory

1 KFTHA I/O module

Tru64 UNIX

running on:

2 CPU modules

1 4-Gbyte Memory

2 KFTHA I/O modules

1-2 Getting Started with Logical Partitions

1.1 Reasons for Partitioning

Partitioning can be used for various reasons, including the

consolidation of computing resources into one system or increasing the

efficiency of an existing system.

Figure 1–2 Consolidating Resources by Using Partitioning

BEFORE AFTER

Server

running 24/7

air pollution

monitoring and

simulation for

greater

Los Angeles

Small server

running office

applications

Medium-sized server

running audio-visual design

group

Partition 0

Partition 1

Partition 2

AlphaServer

GS140

running 3 instances of

Compaq Tru64 UNIX

using logical partitions

BX-0199-99

Otros manuales para AlphaServer GS140

Tabla de contenidos

Otros manuales de Servidor de Compaq

Compaq

Compaq BL10e - HP ProLiant - 512 MB RAM Manual de usuario

Compaq

Compaq 108164-003 - ProLiant - 800 Guía de inicio rápido

Compaq

Compaq ProLiant 1000 Guía de referencia rápida

Compaq

Compaq 1850R - ProLiant - 128 MB RAM Guía de inicio rápido

Compaq

Compaq ProLiant 8500 Guía de inicio rápido

Compaq

Compaq ProLiant DL380 G2 Instrucciones de funcionamiento y seguridad

Compaq

Compaq ML330e - ProLiant - 64 MB RAM Manual

Compaq

Compaq ES40CSLP Guía de solución de problemas

Compaq

Compaq 112726-001 - ProLiant - 6500 Guía de referencia rápida

Compaq

Compaq DL590 - HP ProLiant - 1 GB RAM Manual de usuario

Compaq

Compaq 386746-001 - ProLiant - 1600 Guía de inicio rápido

Compaq

Compaq ProLiant 8500 Manual de usuario

Compaq

Compaq ProLiant 1000 Guía de referencia rápida

Compaq

Compaq AlphaServer GS60E Manual de usuario

Compaq

Compaq ProLiant 4500 Servers Manual

Compaq

Compaq RRDCD Manual de lista de piezas

Compaq

Compaq AlphaServer DS20E Manual de usuario

Compaq

Compaq 1850R - ProLiant - 128 MB RAM Manual de usuario

Compaq

Compaq DL320 - ProLiant - G3 Instrucciones de funcionamiento y seguridad

Compaq

Compaq ProLiant 3000 Manual

Compaq

Compaq 221050-001 - ProLiant - 5000R Manual de usuario

Compaq

Compaq BL10e - HP ProLiant - 512 MB RAM Manual de referencia

Compaq

Compaq BL10e - HP ProLiant - 512 MB RAM Documento técnico

Compaq

Compaq ProLiant Clusters HA/F100 Manual de servicio

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario