Comnet netwave NWK3 AP Manual de usuario
INSTALLATION AND OPERATION MANUAL
COMMERCIAL 802.11A/N WIRELESS ETHERNET
Thank you for purchasing Netwave® from ComNet. This installation guide applies to the
following models:
NW3 Commercial Multipoint, FCC Version, User Configurable
NW4 Commercial Multipoint, ETSI Version, User Configurable
NWK3Commercial Point to Point Kit, FCC Version (Includes NWK3_AP and NWK3_CL)
NWK4 Commercial Point to Point Kit, ETSI Version (Includes NWK4_AP and NWK4_CL)
The NetWave® NW3 and NW4 from ComNet™is a commercial grade wireless
Ethernet transmission link that can be configured through the embedded User
Interface as a Client or as an Access Point. This point-to-multipoint model allows
multiple Ethernet endpoints to be connected to a central Access Point. Up to 15
endpoints can be linked to a central access point. The NW3 and NW4 support up to
95Mbps throughput due to MIMO technology. An easy to read LED array displays
unit operational status along with received signal strength ensuring optimal
installation and operation. The units are passive PoE (Power over Ethernet) powered
or through a supplied PoE injection module. The NW3 is FCC certified and the NW4
is ETSI, DFS and TPC certified.
This manual serves the following
ComNet Model Numbers:
NW3
NW4
NWK3
NWK4
INS_NW(3,4)_REV– 06/10/13 PAGE 2
INSTALLATION AND OPERATION MANUAL NW3/NW4
TECH SUPPORT: 1.888.678.9427
About This Guide
This guide is intended for different users such as engineers, integrators, developers, IT managers,
and technicians.
It assumes that users have some PC competence and are familiar with Microsoft Windows
operating systems and web browsers such as Windows Internet Explorer and Mozilla Firefox, as
well as have knowledge of the following:
»Installation of electronic equipment
»Electrical regulations and guidelines
»Knowledge of Local Area Network technology
Related Documentation
The following documentation is also available:
»NW3/NW4 and NWK3/NWK4 Datasheets
»NW3/NW4 and NWK3/NWK4 Quick Start Guides
Website
For information on ComNet’s entire product line, please visit the ComNet website at
http://www.comnet.net
Support
For any questions or technical assistance, please contact your sales person (sales@comnet.net) or
the customer service support center (techsupport@comnet.net)
Safety
»Only ComNet service personnel can service the equipment. Please contact ComNet Technical
Support.
»The equipment should be installed in locations with controlled access, or other means of
security, and controlled by persons of authority.
INS_NW(3,4)_REV– 06/10/13 PAGE 3
INSTALLATION AND OPERATION MANUAL NW3/NW4
TECH SUPPORT: 1.888.678.9427
Contents
About This Guide 2
Related Documentation 2
Website 2
Safety 2
Overview 4
Legal Information 4
1.0 Introduction 5
2.0 Point to Multi-Point – NW3 and NW4 6
3.0 Point to Point Systems – NWK3 and NWK4 6
4.0 Cabling Requirements 6
5.0 Hardware Installation 7
5.1 NW3 and NW4 Commercial Grade Components 7
5.2 NW3 and NW4 Commercial Indicating LED Details 8
5.3 NW3 and NW4 Commercial Grade Electrical Connections 9
5.4 NW3 and NW4 Commercial Grade Typical Pole Mounting 10
6.0 Detailed Power Requirements 11
7.0 Key Default Configurations 11
8.0 Quick Configuration 12
9.0 Detailed Configuration 14
9.1 STATUS Page – Access Point 14
9.2 STATUS-Client Page - Client 17
9.3 WIRELESS SETTINGS Page – Access Point 20
9.4 WIRELESS SETTINGS-Client Page - Client 25
9.5 NETWORK SETTINGS Page – Client or Access Point 29
9.6 SYSTEM TOOLS Page – Client and Access Point 32
9.7 ADMIN Page – Client or Access Point 37
10.0 Agency Compliance 42
11.0 GPL (General Public License) Statement 44
INS_NW(3,4)_REV– 06/10/13 PAGE 4
INSTALLATION AND OPERATION MANUAL NW3/NW4
TECH SUPPORT: 1.888.678.9427
Overview
Legal Information
No part of this document may be reproduced or transmitted in any form or by any means,
electronic and mechanical, for any purpose, without the express written permission of ComNet.
Copyright
Copyright © 2013 ComNet. All rights reserved.
Disclaimer
ComNet reserves the right to make changes in specifications at any time without notice. The
information furnished by ComNet in this material is believed to be accurate and reliable. However,
ComNet assumes no responsibility for its use.
INS_NW(3,4)_REV– 06/10/13 PAGE 5
INSTALLATION AND OPERATION MANUAL NW3/NW4
TECH SUPPORT: 1.888.678.9427
1.0 Introduction
The NetWave® NW3 and NW4 from ComNet™is a commercial grade wireless Ethernet
transmission link that can be configured through the embedded User Interface as a Client or as an
Access Point. This point-to-multipoint model allows multiple Ethernet endpoints to be connected
to a central Access Point. Up to 15 endpoints can be linked to a central access point. The NW3
and NW4 support up to 95Mbps throughput due to MIMO technology. An easy to read LED array
displays unit operational status along with received signal strength ensuring optimal installation
and operation. The units are passive PoE (Power over Ethernet) powered or through a supplied
PoE injection module. The NW3 is FCC certified and the NW4 is ETSI, DFS and TPC certified.
This manual contains detailed information covering ComNet NetWave commercial grade 802.11n
wireless products. NetWave comes configured for either point to point or point to multipoint
applications.
This manual contains detailed operational and configuration information not covered in the quick
start guides.
This guide applies to the following models:
»NW3 – Commercial Multipoint, FCC Version, User Configurable
»NW4 – Commercial Multipoint, ETSI Version, User Configurable
»NWK3 – Commercial Point to Point Kit, FCC Version (Includes NWK3_AP and NWK3_CL)
»NWK4 – Commercial Point to Point Kit, ETSI Version (Includes NWK4_AP and NWK4_CL)
INS_NW(3,4)_REV– 06/10/13 PAGE 6
INSTALLATION AND OPERATION MANUAL NW3/NW4
TECH SUPPORT: 1.888.678.9427
2.0 Point to Multi-Point – NW3 and NW4
These individual units allow the user to configure for either multipoint access point or client
operation. There is a MAC address lock feature that can be enabled through the user interface
but is not enabled by default. The NWx does support integrated directional and external omni
directional antennas. See the ComNet website for the latest information regarding antenna
support.
Passive
Power
Injector
Passive
Power
Injector
Passive
Power
Injector
NW3
(Client)
IP
Camera
NW3
(Client)
IP
Camera
NW3
(Client)
IP
Camera
PC DVR
Cat5 Cable
CNGE2FE8MS
Managed
Switch
Passive
Power
Injector NW3
(Access Point)
3.0 Point to Point Systems – NWK3 and NWK4
Each point to point kit comes with a preconfigured access point and client. Both units will not only
be configured to operate on the same SSID but also MAC addressed locked to each other. This
simplifies installations as well as enabling higher operating EIRP for FCC versions. The NWKx does
support integrated directional and external omni directional antennas. See the ComNet website
for the latest information regarding antenna support.
Passive
Power
Injector
NWK3
(Client)
IP
Camera
PC DVR
Cat5 Cable
CNGE2FE8MS
Managed
Switch
Passive
Power
Injector NWK3
(Access Point)
4.0 Cabling Requirements
»Shielded CAT 5 or better should be used for all out of plant Ethernet connection and should
be properly grounded through the PoE AC ground. Industrial grade shielded Ethernet cable is
recommended to help prevent ESD damage commonly experienced with outdoor installations.
Visit www.comnet.net/comnet-products/cables
INS_NW(3,4)_REV– 06/10/13 PAGE 7
INSTALLATION AND OPERATION MANUAL NW3/NW4
TECH SUPPORT: 1.888.678.9427
5.0 Hardware Installation
5.1 NW3 and NW4 Commercial Grade Components
INS_NW(3,4)_REV– 06/10/13 PAGE 8
INSTALLATION AND OPERATION MANUAL NW3/NW4
TECH SUPPORT: 1.888.678.9427
5.2 NW3 and NW4 Commercial Indicating LED Details
MINIMUM SIGNAL MAXIMUM SIGNAL
LED VISUAL CUE INDICATION
POWER SOLID GREEN Power is supplied to the NW3/NW4
OFF No power is supplied to the NW3/NW4
ETHERNET LINK
SOLID GREEN Ethernet connection is established
FLASH GREEN Ethernet connection is established and there is activity present
OFF No Ethernet connection established
RSSI1 SOLID RED Poor signal strength
RSSI2 SOLID YELLOW Acceptable signal strength
RSSI3 SOLID GREEN Good signal strength
RSSI4 / STATUS FLASH GREEN Unit is booting up
SOLID GREEN Excellent signal strength
POWER
ETHERNET
RSSI1
RSSI2
RSSI3
RSSI34 / STATUS
SIGNAL STRENGTH:
INS_NW(3,4)_REV– 06/10/13 PAGE 9
INSTALLATION AND OPERATION MANUAL NW3/NW4
TECH SUPPORT: 1.888.678.9427
5.3 NW3 and NW4 Commercial Grade Electrical Connections
Remove the bottom cover and insert the RJ45 connectorized cable into the RJ45 jack. Next
re-install the bottom cover while keeping the two remaining black rubber pieces in place.
Connect one end of an RJ-45 Ethernet cable to the LAN OUT port of the Power Injection Module
(PIM) and the other end to LAN of the access point – as sown below.
NOTE Maximum length of the RJ-45 CAT5 cable is 90 meters.
Connect the RJ-45 Ethernet cable attached to the PIM to a network device, such as a switch or to
the configuration PC. Then plug the power adaptor to an AC power outlet and power plug into
the socket of the PIM – as shown in the diagram below.
NOTE: DC Passive PoE input range 12 to 24 VDC
INS_NW(3,4)_REV– 06/10/13 PAGE 10
INSTALLATION AND OPERATION MANUAL NW3/NW4
TECH SUPPORT: 1.888.678.9427
5.4 NW3 and NW4 Commercial Grade Typical Pole Mounting
Este manual sirve para los siguientes modelos
7
Tabla de contenidos
Otros manuales de Hardware de red de Comnet
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
