CommScope ION-E Series Manual de usuario

ION®-E Series Hardware

Installation Guide • M0201AAA • June 2017

DISCLAIMER

ThisdocumenthasbeendevelopedbyCommScope,andisintendedfortheuseofitscustomersandcustomersupport

personnel.Theinformationinthisdocumentissubjecttochangewithoutnotice.Whileeveryefforthasbeenmadeto

eliminateerrors,CommScopedisclaimsliabilityforanydifficultiesarisingfromtheinterpretationoftheinformation

containedherein.Theinformationcontainedhereindoesnotclaimtocoveralldetailsorvariationsinequipment,norto

provideforeverypossibleincidenttobemetinconnectionwithinstallation,operation,ormaintenance.Thisdocument

describestheperformanceoftheproductunderthedefinedoperationalconditionsanddoesnotcovertheperformance

underadverseordisturbedconditions.Shouldfurtherinformationbedesired,orshouldparticularproblemsarisewhichare

notcoveredsufficientlyforthepurchaser'spurposes,contactCommScope.

CommScopereservestherighttochangeallhardwareandsoftwarecharacteristicswithoutnotice.

©2017CommScope,Inc.AllRightsReserved.

Thisdocumentisprotectedbycopyright.Nopartofthisdocumentmaybereproduced,storedinaretrievalsystem,or

transmitted,inanyformorbyanymeans,electronic,mechanicalphotocopying,recording,orotherwisewithouttheprior

writtenpermissionofCommScope.

Forpatentsseewww.cs-pat.com.

TRADEMARKS

Alltrademarksidentifiedby®or™areregisteredtrademarksortrademarks,respectively,ofCommScope,Inc.Namesof

otherproductsmentionedhereinareusedforidentificationpurposesonlyandmaybetrademarksand/orregistered

trademarksoftheirrespectivecompanies.

AndrewWirelessSystemsGmbH,30-June-2017

This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED

INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device.

Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000

for each continuing violation.

This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED

INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device.

You MUST register Class B signal boosters (as defined in 47 CFR 90.219) online at

www.fcc.gov/signal-boosters/registration. Unauthorized use may result in significant forfeiture penalties,

including penalties in excess of $100,000 for each continuing violation.

M0201AAA CPRI Digital Interface Unit Installation and Provisioning Guide

1 Using this Document ____________________________________________________________________________________1

Document Revision History ................................................................................................................................................................................... 2

Document Cautions and Notes.............................................................................................................................................................................. 3

Abbreviations Used in this Guide .......................................................................................................................................................................... 4

2 ION-E Series Hardware Overview __________________________________________________________________________5

ION-E Series System Overview .............................................................................................................................................................................. 6

Safely Working with ION-E Hardware ................................................................................................................................................................... 9

Equipment Symbols with CE Compliance ......................................................................................................................................................... 9

Health and Safety Precautions ......................................................................................................................................................................... 9

Property Damage Warnings ........................................................................................................................................................................... 10

Compliance and Standards Certification ............................................................................................................................................................. 11

FCC RF Exposure Requirements...................................................................................................................................................................... 11

EMC Standards ............................................................................................................................................................................................... 11

FCC and IC Standards...................................................................................................................................................................................... 12

3 WCS-2 and WCS-4 Subracks and Modules __________________________________________________________________13

WCS-2 and WCS-4 Subracks and Modules ..........................................................................................................................................................14

WCS Subrack Front Panel Card Slots and GUI Identification .......................................................................................................................... 15

WCS Subrack Back Panel Connectors .............................................................................................................................................................16

WCS Subrack Alarm Connector....................................................................................................................................................................... 17

WCS Fan Modules and Filters ......................................................................................................................................................................... 18

System User Interface Card (SUI) ................................................................................................................................................................... 19

RF Donor Card (RFD)....................................................................................................................................................................................... 20

Optical Transport Card (OPT).......................................................................................................................................................................... 21

Copper Transport Card (CAT).......................................................................................................................................................................... 22

Auxiliary Unit Transport Card (AUT) ............................................................................................................................................................... 23

Installing Subracks and PSUs in an Equipment Rack ........................................................................................................................................... 24

Rack-Mounting the Subracks and PSU............................................................................................................................................................24

Connect the Subrack and PSU Power and Communication Cables ................................................................................................................ 25

Install the CAN and TEN Cards........................................................................................................................................................................ 27

Install SFP+ Transceivers in the OPT Cards ..................................................................................................................................................... 28

Connect the RFD Cards ................................................................................................................................................................................... 29

Connect the CAT Cards ................................................................................................................................................................................... 30

Connect the AUT Cards................................................................................................................................................................................... 32

4 Point of Interface (e-POI) Subracks _______________________________________________________________________35

Point Of Interface (e-POI) Subrack ...................................................................................................................................................................... 36

e-POI Subrack Back Panel Connectors............................................................................................................................................................ 36

Interface Card (IFC)......................................................................................................................................................................................... 37

e-POI Module.................................................................................................................................................................................................. 38

Installing an e-POI Subracks and Modules .......................................................................................................................................................... 39

Removing an e-POI Module from an e-POI Subrack............................................................................................................................................ 40

e-POI Subrack and Component Specifications ....................................................................................................................................................41

5 Power Supply Unit (PSU)________________________________________________________________________________43

Power Supply Unit (PSU) ..................................................................................................................................................................................... 44

PSU Modules and Connectors ........................................................................................................................................................................ 44

12 Vdc Power Module LEDs............................................................................................................................................................................ 45

57 Vdc Power Module LEDs............................................................................................................................................................................ 46

Installing PSUs ..................................................................................................................................................................................................... 47

TABLE OF CONTENTS

CPRI Digital Interface Unit Installation and Provisioning Guide M0201AAA Issue 1

Page iv © June 2017 CommScope, Inc.

Table of Contents

6 Universal Access Points_________________________________________________________________________________49

Identifying UAPs in the ION-E Software ......................................................................................................................................................... 50

UAPs and UAP-N25s ....................................................................................................................................................................................... 51

UAP-X.............................................................................................................................................................................................................. 52

Installing UAPs..................................................................................................................................................................................................... 53

Using the UAP Ceiling Mount Assembly (PN 7683182-00) ............................................................................................................................. 53

Required Tools for a Standard UAP Ceiling Mount .................................................................................................................................. 53

Unpack and Inspect the Ceiling Mount Assembly.................................................................................................................................... 53

Standard Ceiling Mount Overview ........................................................................................................................................................... 54

Standard Ceiling Mount Installation Steps............................................................................................................................................... 55

Mounting a UAP Using a UAP Quick Release Ceiling Mount Kit..................................................................................................................... 57

Required Tools for a Quick Release Ceiling Mount Kit............................................................................................................................. 57

Unpack and Inspect the Quick Release Ceiling Mount Kit ....................................................................................................................... 58

Overview of Using a Quick Release Ceiling Mount Kit ............................................................................................................................. 58

Mount the UAP to the Ceiling ..................................................................................................................................................................59

Connect the UAP Cables........................................................................................................................................................................... 61

Install the UAP.......................................................................................................................................................................................... 62

Mounting a UAP to a Wall Using the UAP Wall Mounting Kit (PN 7683181-00) ............................................................................................ 63

Required Tools for a Wall Mount............................................................................................................................................................. 63

Unpack and Inspect the Wall Mounting Kit.............................................................................................................................................. 64

Mount the UAP to a Wall ......................................................................................................................................................................... 64

UAP, UAP-N25, and UAP-X Cable Requirements............................................................................................................................................ 67

Cascading a UAP, UAP-X, or UAP-N25 ............................................................................................................................................................68

UAP Maintenance................................................................................................................................................................................................ 69

Remove a UAP from a Ceiling Mount .............................................................................................................................................................69

Remove a UAP from a Wall Mount................................................................................................................................................................. 70

Preventative UAP Maintenance ..................................................................................................................................................................... 71

UAP Specifications............................................................................................................................................................................................... 72

UAP Output Specifications.............................................................................................................................................................................. 72

UAP Bandwidth Specifications........................................................................................................................................................................ 73

7 Carrier Access Point, Low Power (CAP L) ___________________________________________________________________75

Identifying CAP Ls in the ION-E Software ............................................................................................................................................................ 76

CAP L Overview............................................................................................................................................................................................... 77

CAP L Connectors, Ports, and LEDs........................................................................................................................................................... 78

CAP L with an Optical Fiber Interface....................................................................................................................................................... 79

CAP L with a Copper Interface and External DC Power............................................................................................................................ 80

CAP L with a Copper Interface and Power Cat 6A Cable .......................................................................................................................... 81

Fan Interface Port..................................................................................................................................................................................... 82

Powering a CAP L...................................................................................................................................................................................... 82

CAP L Accessory Options .......................................................................................................................................................................... 83

Fan Kit (PN 7724090-00) .................................................................................................................................................................... 84

CAP L Flat Mounting Bracket Kit (PN 7774353-00) ............................................................................................................................ 85

CAP L Power Supply / Hybrid Fiber Mounting Kit (PN 7774354-00) .................................................................................................. 86

CAP L 240W AC/DC Power Supply Kit (PN 7775087-00) .................................................................................................................... 87

CAP OCTIS Kits (PNs 7773582-00 and 7760652-00)........................................................................................................................... 88

Installing CAP Ls................................................................................................................................................................................................... 89

Prepare for Installation................................................................................................................................................................................... 89

Recommended Tools................................................................................................................................................................................ 89

Recommended Materials.........................................................................................................................................................................89

Determine the Power Consumption of the CAP L.................................................................................................................................... 90

Determine the CAP L Mounting Site ........................................................................................................................................................ 90

Mounting Orientation .............................................................................................................................................................................. 93

Mounting Cautions................................................................................................................................................................................... 95

General Installation Safety Requirements ............................................................................................................................................... 95

Guard Against Damage from Electro-Static Discharge............................................................................................................................. 95

Unpack and Inspect the CAP L and Optional Accessories ........................................................................................................................ 96

M0201AAA CPRI Digital Interface Unit Installation and Provisioning Guide

Table of Contents

Installing a CAP L.............................................................................................................................................................................................96

Mount the CAP L ...................................................................................................................................................................................... 96

Flat-Surface Mount a CAP L ............................................................................................................................................................... 97

Wall Mount a CAP L Using a Flat Mounting Bracket Kit (PN 7774353-00)......................................................................................... 97

Wall Mount a CAP L Using a Power Supply / Hybrid Fiber Mounting Kit (PN 7774354-00)............................................................. 100

Wall Mount a CAP L Using a 240W AC/DC Power Supply Kit (PN 7775087-00)...............................................................................106

Ceiling Mount a CAP L......................................................................................................................................................................109

(Optional) Ground the CAP L..................................................................................................................................................................110

Connect the CAP L Cables....................................................................................................................................................................... 111

Cable a CAP L with an Optical Fiber Interface..................................................................................................................................111

Cable a CAP L with a Copper Interface and Power over Category 6A Cable.................................................................................... 114

Cable a CAP L with a Copper Interface and Power over Ethernet ...................................................................................................116

Cascading CAP Ls ...............................................................................................................................................................................................118

CAP L Maintenance ...........................................................................................................................................................................................119

Remove a CAP L from a Ceiling Mount......................................................................................................................................................... 119

Remove a CAP L from a Wall Mount ............................................................................................................................................................ 120

Preventative CAP L Maintenance ................................................................................................................................................................. 121

CAP L Specifications........................................................................................................................................................................................... 122

CAP L Output Specifications ......................................................................................................................................................................... 122

CAP L Bandwidth Specifications.................................................................................................................................................................... 123

8 DCCS Global Technical Support__________________________________________________________________________125

Contacting DCCS Global Technical Support....................................................................................................................................................... 126

Telephone Helplines..................................................................................................................................................................................... 126

Online Support..............................................................................................................................................................................................126

DCCS Technical Training .................................................................................................................................................................................... 127

Accessing ION-E Series User Documentation.................................................................................................................................................... 128

Hardware to Software Mapping Information.................................................................................................................................................... 129

CPRI Digital Interface Unit Installation and Provisioning Guide M0201AAA Issue 1

Page vi © June 2017 CommScope, Inc.

Table of Contents

M0201AA ION®-E Series Hardware Installation Guide

Chapter Topics Page

Thischapterprovidesinformationonhowtousethishardwareinstallationguide.

USING THIS DOCUMENT 1

ION®-E Series Hardware Installation Guide M0201AA

Page 2 © June 2017 CommScope, Inc.

Document Revision History

DOCUMENT REVISION HISTORY

Document # Document Date Technical Updates

M0201AAA June 2017 Initial release. Introduces the new Carrier Access Point, Low Power (CAPL), and replaces the

following ION-E Series user documentation:

• hardware section of the ION-E Series Software Version 2.0.0 User’s Manual (PN M0201A0D)

•ION-E Series Instructions for WCS Subracks (PN M0201A1C)

•ION-E Series Instructions for Ceiling Mount UAP (PN M0201A2A)

•ION-E Series Instructions for UAP Wall Mount (PN M0201A3B)

•ION-E Series Instructions for UAP (PN M0201A4A)

•ION-E Series Instructions for SUI, RFD, CAT, OPT, and AUT Cards (PN M0201A5B)

•ION-E Series Instructions for e-POI (PN M0201A7B)

•ION-E Series Instructions for UAP Quick Release Ceiling Mount (PN M0201A8A).

M0201AA ION®-E Series Hardware Installation Guide

Document Cautions and Notes

DOCUMENT CAUTIONS AND NOTES

Thisdocumentcontainsnotes,cautions,andwarnings.Ingeneral,cautions,warnings,andnotesindicatethe

following:

The icon to the left is used to indicate a caution or warning. Cautions and warnings indicate operations or

steps that could cause personal injury, induce a safety problem in a managed device, destroy or corrupt

information, or interrupt or stop services.

The icon to the left indicates a caution or warning that pertains to laser equipment.

The icon to the left is indicates a caution or warning that pertains to Radio Frequency (RF).

The icon to the left is indicates a Note. Notes provide information about special circumstances.

ION®-E Series Hardware Installation Guide M0201AA

Abbreviations Used in this Guide

ABBREVIATIONS USED IN THIS GUIDE

AUT Auxiliary Transport LED Light Emitting Diode

AUX Auxiliary MHz Megahertz

CCelsius Mm Millimeter

CAN Central Area Node MMF Multi-Mode Fiber

CAP L Carrier Access Point, Low Power NC Normally Closed

Cat Category NO Normally Open

CAT Copper Transport OAP Optimized Access Point

COM Communication or Common OPT Optical Transport

dB Decibel PN Part Number

dBc Decibels (referenced to the carrier) PoCAT Power over Cate-gory 6A cable

dBm Decibel-milliwatts PoE Power over Ethernet

DC Direct Current POI Point of Interface

EFTA European Free Trade Association RAN Regional-Area Network

EMC Electromagnetic Compatibility RF Radio Frequency

EU European Union RFD RF Donor

FFahrenheit RTN Return

FCC Federal Communications Commission RU Rack Unit

Gb Gigabyte SFP Small Form-Factor Pluggable

Gbps Gigabits per second SMF Single-Mode Fiber

GHz Gigahertz SUI System User Inter-face

IC Industry Canada TEN Transport Expan-sion Node

IFC Interface Card UAP Universal Access Point

kg Kilogram Vdc Volts, direct cur-rent

LCD Liquid-Crystal Display WWatts

Tabla de contenidos

Otros manuales de Plataforma multiservicio de CommScope

CommScope

CommScope PPL-1U Manual de usuario

Manuales populares de Plataforma multiservicio de otras marcas

Banner

Banner SureCross DX99 FlexPower Series Manual de usuario

VeEX

VeEX eCPRI Manual de usuario

Vestil

Vestil FTLP Series Manual de usuario

ATD Tools

ATD Tools ATD7341 Instrucciones de uso

Calix

Calix E7-20 Manual de usuario

Vestil

Vestil WP Series Manual de usuario

Bosch

Bosch XDK Manual de usuario

TEUPEN

TEUPEN LEO 23 GT Manual de usuario

Juniper

Juniper NFX350 Manual de usuario

Vestil

Vestil WP Series Hoja de especificaciones

Cisco

Cisco ONS 15454 Series Manual

Airo

Airo XS Series Manual de usuario

Siemens

Siemens RUGGEDCOM RX1400 Manual de usuario

Siemens

Siemens SIMATIC NET RUGGEDCOM MX5000 Manual de usuario

PASCO

PASCO ME-6834 Manual de usuario

Parker

Parker P2M Node 24 DO Manual de usuario

Cisco

Cisco ONS 15454 Series Manual de usuario

Infinera

Infinera ATN Instrucciones de funcionamiento e instalación