Commax DRC-701LC/RF1 Manual de usuario
56
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
Lobby Camera Phone DRC-701LC/RF1
User Manual
1
Table of Contents
1. Greeting
1. Greeting ..............................................................................................................................................................1
2. Safety Warning & Caution ..................................................................................................................................2
3. Before Use...........................................................................................................................................................4
4. Part names and Features ..................................................................................................................................5
5. Various Password Types....................................................................................................................................9
6. Password Settings ............................................................................................................................................10
7. Retrieving Unit Password .................................................................................................................................13
8. Building number and Lobby Phone Number Registration at Public Entrances.............................................14
9. Using RF Card Keys (Product Model : DRC-701LC/RF1) .............................................................................16
10. Surveillance Monitor Setting ........................................................................................................................22
11. Setting the Entrance Access Log Forwarding Function(to SecuMAX) ....................................................23
12. Setting the Voice Message of Unit Number ..................................................................................................24
14. Setting the Call by Unit Line. ..........................................................................................................................26
15. Setting the Automatic Security Call or Emergency Call Option....................................................................27
16. Selecting Call Ring Option .............................................................................................................................28
17. Setting the Number of Call Ring Repetitions.................................................................................................29
18. Setting the Voice Message Function ............................................................................................................30
19. Setting the Notice Forwarding Function to SecuMAX when the door released from outside .................31
20. Setting Force Open via SecuMAX.................................................................................................................32
21. Setting the Forced Entry Notice Forwarding to SecuMAX ..........................................................................33
22. Selecting the Wiring Method ..........................................................................................................................34
23. Video Out Impedance Adjustment Setting ...................................................................................................35
24. Registration of Household Unit Number........................................................................................................36
25. Checking Videophone Status of Household Units........................................................................................38
26. Activation of Electronic Key (Password) Function ........................................................................................40
27. Setting the Keypad LED Option .....................................................................................................................41
28. Setting the Volume of Voice and Beep Sound .............................................................................................42
29. Setting the Door Release by Building Password .........................................................................................43
30. How to make a Unit-to-Unit Call.....................................................................................................................45
31. How to make a call to Security Station ..........................................................................................................45
32. Door Release by Unit Password (Refer to 4-3).............................................................................................46
33. Door Release by Building Password or Management Password ................................................................46
34. Supplement (Programming Summary) .........................................................................................................47
35. Wiring Method .................................................................................................................................................49
36. Miscellaneous ................................................................................................................................................52
37. Part list .............................................................................................................................................................53
38. Specifications and Features ..........................................................................................................................53
39. RF-ID Model (Optional) .................................................................................................................................54
✽Thank you for purchasing COMMAX products.
✽This product is a high-end Main Entrance Interphone that supports Electronic
Number Key (Password) and RF Card Keys features. Please read this manual
thoroughly before installation.
2. Safety Warning & Caution
2
Please follow the things described below in order to prevent any
danger or property damage.
Warning
Caution
Prohibition.
No disassembly
No touch
Must follow strictly.
Shows plugging out the power cord
without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
It may cause a serious damage or
injury if violated.
It may cause a minor damage or
injury if violated.
Power & Installation
Warning
Please don’t use several
products at the same time on
one power socket.
·It may cause a fire due to an
abnormal overheating.
Please don’
tbend the power
cable excessively or it may
cause an electric shock.
·fire when using a damaged
power cable.
Please don’
t handle the power
cable with a wet hand.
·It may cause an electric
shock.
Please plug out the power
cable from the socket when
not using it for a long period
of time.
·It may shorten the product
lifespan or cause a fire.
Please don’t install the
product in the place where
there is much oil, smoke or
humidity.
·It may cause an electric
shock or fire.
Please don’t install the
product with the lightening
and thunder.
·It may cause an electric
shock or fire.
Please don’
tuse and connect
this product with other
products with different rated
voltage
·It may cause a disorder or
fire.
When installing the product
that generates heat, please
install the product away from
the wall (10cm) for the
ventilation.
·It may cause a fire due to
the increased internal
temperature.
3
Cleaning & Use
Please don’tdisassemble,
repair or rebuild this product
arbitrarily (please contact the
service center if a repair is
needed.
·It may cause an electric
shock or fire.
Please plug the power cable
firmly into the inner end
·It may cause a fire.
Please hold the plug tightly
when unplugging the power
cable (a part of the copper
wire may be disconnected if
the grabbing is only made on
the cord when pulling out the
cable).
·It may cause an electric
shock or fire
When connecting the power
cables after cutting the cable,
please install the product with
power off
·It may cause an electric
shock or fire
When installing the product,
please fix it firmly while using
the wall-mounting unit and
screws.
·It may cause an injury from
the falling object.
Please be careful when using
an AC circuit breaker since
there is a possibility of an
electric shock.
When cleaning the product,
please rub it with a soft and
dry cloth after plugging out
the power cable. (Please don’
t
use any chemical products
such as wax, benzene, alcohol
or cleanser.)
Please don’
t drop the product
on the ground and don’
tapply
a shock .
·It may cause a failure.
Please use the designated
connection cable within the
maximum calling distance
designated for the product
·It may reduce the product
performance.
Please check the use voltage
and current for the DC-only
products and use the
appropriate rectifier.
·It may cause a fire.
Please avoid direct rays of the
sun or heating devices at a
time of installation.
·It may cause a fire.
Please don’t install the
product on an unstable place
or small support board.
·It may cause an injury if it
falls down while in use.
Ifan abnormal sound, burning
smell or smoke is coming out
of the product, please plug out
the power cable and contact a
service center.
·It may cause an electric
shock or fire.
Please don’t insert any
metallic or burnable materials
into the ventilation hole.
·Itmay cause an electric
shock or fire.
Please use only the designated
batteries for the products of
using DC power.
·It may cause an electric
shock or fire.
Cleaning & UsePower & Installation
Warning
Caution
4
3. Before Use
✽Wiring Lobby phone and Security Station Phone :
1. For 481 System (Coaxial Cable) : Common 8 wires that are 3 channels + 1
channel with "Balance Type".
2. For Gateview System (UTP Cable) : Common 4 wires with 1 channel.
✽Wiring Lobby phone and Household unit monitor :
1. For 481 System (Coaxial Cable) : Common 4 wires that include audio and video
via coaxial cable.
2. Gateview System (UTP Cable) : Common 8 wires (Common 6 wires + Video 2
wires) that include audio and video via UTP cable and the video shall be
connected by "in/out" method.
✽Any short-circuits and/or disconnection may cause product damage. Please check
the wires before installation.
✽It is recommended to install one each of Lobby phone, Security Station phone,
and Household unit monitor to check the functionality before initiating overall
products installations.
✽RF Card Keys may be registered up to 2,048 keys (if not connected to computer)
✽Failing Management Password, Building Password, and Unit Password more than
3times will cause an automatic notice to Security Station. Attempts to initiate an
entrance with unregistered RF Card Key will cause an automatic notice to Security
Station as well.
[WARNING]
When power is initially turned on, please be sure that none of the buttons are
pressed.
5
4-1. Part names
4. Part names and Features
Number NumberContent Content
1
Camera
10
Call Button
-calling households and also used
for program setting
2
OLED Display
11
Program Button
-used for program mode settings
3
RF- ID Card Receiver
12
Cancel Button
-to cancel a process or function
being progressed
4
Microphone
13
Speaker
5
Lighting
-Black & White : IR LED
-Color : White LED
14
Camera Angle Adjustment
6
Number Key Button
15
Reset Switch
-to reset building management
password
7
Electronic Key Button
-for an access by password
16
Wiring Connection Terminal
8
Proximity Sensor
- detects an object to trigger LCD
and Key button lighting to turn on
17
Door Release Terminal
9
Security Paging Button
-to page security station when
interphone installed at the
security center
6
4-2. Essentials
✽Initial LCD Display (when power on)
✽RF/ID Receiver ③(Optional)
For an access by RF Card, when RF Card is brought nearby the OLED display
shows a message, "Access granted", with an icon and the door is open.
✽Call Button ⑩(E : Enter)
To call a household unit
✽Program button ⑪(P : Program)
To access the program
7
✽Cancel button ⑩(X : Cancel)
To cancel a process or function being progressed.
✽Reset button ⑮
To reset the password for security center or managing office.
If the Building Password (4-2) or Management Password (4-1) is
lost, press the "Reset Button"(⑮) located on the back of the
product to reset the Password (Passwords will be set as factory
default settings). Press the button for 3 seconds with power on.
✽Security Paging Button ⑨(G : Guard)
To call a security station when an interphone is installed at the security center.
✽Electronic Key Button ⑦(K : Key)
For an access to the entrance by password. (Only if the access by password is
set to be enabled)
8
✽Program Button ⑪
In standby mode, if the button is pressed for 5 seconds, the voice message of
greetings will be heard with below information of product settings on the display.
<Reference>
Below information will be displayed.
1) Welcome! COMMAX Lobbyphone DRC-701LC Ver x.x. (Greetings)
2) Lobby Number: XXXX-XXXX ex) 0101-0901
3) Unit paging: x wire method ex) 4 wire method
4) Camera Impedance: low or high
5) Entrance Access Information is being stored at SecuMAX.
6) RF Reader 13.56MHz
✽#6 message will show as RF Card has been read at least more than once and will
be initialized when power is off.
✽Proximity Sensor ⑧
The proximity sensor located under the touch pad that detects an object within 1
meter and triggers LCD and Keypad lighting to be turn on.
✽Please read below instructions before use
1) If you hear "beep beep beep..." during any program modes, please restart from
the beginning. The beep sounds for improper process.
2) If password is forgotten,
2-1) Password for any household :
Use the identifying household password function (6-1) to confirm the password
(methods to confirm password shall be requested to the Management office or
Security center).
2-2) Password for any building:
Reset the password by using Management password
2-3) Password for Management
Press "Reset Button".
The password will be reset to factory default.
3) Deleting All RF Card Keys function in "8-5" shall ONLY be used when the
product is initially installed.
9
5. Various Password Types
5-1. Password for the Management Office ("Management Password")
A password for the Manager
Factory default for the Manager Password is 4321.
5-2. Password for any buildings ("Building Password")
A common password for a corresponding building.
Factory default for the Building Password is 1234.
5-3. Password for any household units "Unit Password")
A password for each household unit can be set.
Factory default for the Unit Password is 1234.
prog
Tabla de contenidos
Otros manuales de Teléfono de Commax
Commax
Commax AP-2SAG Manual de usuario
Commax
Commax CDV-70MH(M) Manual de usuario
Commax
Commax TP-12AM Manual de usuario
Commax
Commax Fineview CDV-70N Manual de usuario
Commax
Commax CIOT-1020M Manual de usuario
Commax
Commax CAV-43T2 Manual de usuario
Commax
Commax Fineview CDV-70HM2 Manual de usuario
Commax
Commax DRC-40BS Manual de usuario
Commax
Commax TP-12RM Manual de usuario
Commax
Commax Fineview CDV-70N2 Manual de usuario
