Comelit 30009009 Manual de usuario
WATER DETECTOR
ART. 30009009
Specifications:
• Relay output: NC / NO selectable, 1A-120V AC / 1A-24V DC (not inducti e)
• External terminal length: 35mm max
• Case: ABS, white
• Length for additional remote sensors: 100m max
• Additional remote sensors: 8 max
• Power supply: 12V DC
• Current absorption: 20mA max (15mA in stand by)
• Dimensions (W x H x D): 60 x 90 × 25 mm
Installation:
• Open the co er of the water detector
• Fix the water detector on the wall near the floor as much as possible
• Loosen the screws that lock the terminals and adjust them at the height you want
• Tighten the screws to lock the terminals
• Make the electrical connections
• Close the co er of the detector
Note: to connect the remote sensors, we suggest using cable of optimal (two conductors of 0.5 mm
2
) to a oid
that the cable installed in humid atmosphere can create leakage damages to the operation of the de ice.
Ideal for water le el detector, tank filling check,
pipes breaking,
underwater pump troubles, non
inflammables conducti e liquids.
Relay polarity setting:
Connection of re ote sensors:
Via Don Arrigoni, 5 24020 Ro etta S. Lorenzo (Bergamo)
http://www.co elitgroup.co e-mail: export.depart ent@co elit.it
J1
J1
NO (Normally Open)
NC (Normally Closed)
Tabla de contenidos
Otros manuales de Sensor de seguridad de Comelit
Comelit
Comelit RFDT12CE Manual de usuario
Comelit
Comelit WD01A Manual de usuario
Comelit
Comelit RF12PIR Manual de usuario
Comelit
Comelit RF2PIRAMW Manual de usuario
Comelit
Comelit SD01B Manual de usuario
Comelit
Comelit DT02CW Manual de usuario
Comelit
Comelit C001A Manual de usuario
Comelit
Comelit 8461 Series Manual de usuario
Comelit
Comelit RF1MCW Manual de usuario
Comelit
Comelit 47SE192KM Manual de usuario
