Colorlight C3 Manual de usuario
C3 USER MANUAL
CONTENT
Chapter 1 C3 Interfaces Introduction ............................................................................................................................... 1
1.1 C3 Interface ................................................................................................................................................................ 1
1.2 Hardware Connection ................................................................................................................................................. 2
Chapter 2 Operation Environment ................................................................................................................................... 3
Chapter 3 C3 Parameter Settings .................................................................................................................................... 5
3.1 Connection Settings ................................................................................................................................................... 5
3.2 Basic Settings ............................................................................................................................................................. 8
3.3 Advanced Settings .................................................................................................................................................... 10
Chapter 4 Async Program Editing and Publishing ...................................................................................................... 11
4.1 Async Program Editing ............................................................................................................................................. 11
4.2 Async Program Publishing ........................................................................................................................................ 12
4.2.1 Publish Program through Direct USB ............................................................................................................ 12
4.2.2 Publish Program through Ethernet Port ......................................................................................................... 14
4.2.3 Publish Program through USB Disk .............................................................................................................. 16
4.3 Async Program Scheduling ....................................................................................................................................... 19
C3 USER MANUAL
1
Chapter 1 C3 Interfaces Introduction
1.1 C3 Interface
No Interface Function
1 Indicator Light Indicate power and signal status
2 LED DISPLAY Connect with LED screen (connect to receiving card)
3 Audio HIFI stereo output
4 CONFIG Connect with PC for parameters setting and contents update
5 USB1/2 Update and play content through USB stick, support factory reset through U disc
6 100M_IN Connect with PC to access LAN
7 Power DC 5V/2A
C3 USER MANUAL
2
1.2 Hardware Connection
C3 Configuration Control & play without computer
C3 USER MANUAL
3
Chapter 2 Operation Environment
Supported system: C3 only can run under windows 7/8/10, not support windows XP.
Supported software: LEDVISION, 4.20 version or higher version is recommended.
You can download the LEDVISION software from Colorlight’s official website www.lednets.com, then
complete the installation according to the steps below.
1. Run the software package, and select [ English ] → [ OK ]
C3 USER MANUAL
4
2. Click [ Browse ], then choose the installation location, then click[ Next ], choose components according
to your own computer status, click [ Install ] to complete.
C3 USER MANUAL
5
Chapter 3 C3 Parameter Settings
3.1 Connection Settings
1. Before connecting your C3 to the computer, first click [ Control ] on menu → [ Screen Control ], then select
[ C-Series Box Play ] in Select Sending Device, then set up [ LED Screen Window Management].
Note: If you do not complete this step, LEDVISION may not function properly because of a conflict between
Net Card mode and C3 CONFIG interface.
C3 USER MANUAL
6
2. Use standard A/B cable to connect C3 to computer when C3 is powered on, one side to connect USB
port, another side for C3 CONFIG port.
Click [ Publish Program to C Series Playboxes ] (as shown in the red box) to enter program publish
interface.
C3 USER MANUAL
7
3. Left-click [ Direct USB ] and then right-click [ Refresh ], your C3 will show up in program publishing
window, select your device to set parameters and choose what content to play.
C3 USER MANUAL
8
3.2 Basic Settings
Ensure LED display is under normal configuration before setting on C3 parameters.
When setting C3 parameters, you can connect your C3 to you PC through a standard USB A/B cable,
and connect your C3 to your LED screen through network cable.
1. Play Box Date and Time: Click [ Modify ] to set up date and time, or time zone as well.
2. Alarm Settings: Set wake up and sleeping time, which works once checked.
3. Play Box Time: Display the setting time.
Running Time: Calculated once C3 sender powered on.
Capacity/Remain: View memory utilization.
4. Power on, Sleep, Restart: To perform C3 sender box operation like power on, sleep and restart once
clicked.
5. Playing: Use the drop down menu to play programs.
Program management: Check, delete and choose program, and much more.
Tabla de contenidos
Otros manuales de Placa giratoria de Colorlight
