Color imagination SI-045 Manual de usuario

Quad-C

Quad-C LED

LED

LED Par

Par

Par Can

Can

SI-045

User

User Manual

Manual

KEEP

KEEP THIS

THIS

THIS MANUAL

MANUAL

MANUAL FOR

FOR

FOR FUTURE

FUTURE

FUTURE NEEDS

NEEDS

1. Un

Un packing

packing

Thank you for choosing Color Imagination ’ s Quad-C LED par can . For your own

safety, please read this manual before installing the device. This manual covers

the important information on installation and applications. Please install and

operate the fixture with following instructions. Meanwhile, please keep this manual

well for future needs.

Color Imagination ’ s Quad-C LED par can is made of a new type of high

temperature strength of cast aluminum casing with nice outlook. The fixture is

designed and manufactured strictly following CE standards, complying with

international standard DMX512 protocol. It ’ s available independently controlled

and linkable with each other for operation. And it is applicable for large-scale live

performances, theater, studio, nightclubs and discos.

SI- 045 adopts 18PCS high power 10W 4-in-1 LED lamps which features high

brightness and stability. Please carefully un pack it when you receive the fixture and

check whether it is damaged during the transportation. And please check whether

the following items are included inside the box:

Par Can ------- one User Manual----one Power Cable---one

10.

10. Maintenance

Maintenance

Maintenance and

and

and Cleaning

Cleaning

The following points have to be considered during the inspection:

1) All screws for installing the devices or parts of the device have to be tightly

connected and must not be corroded.

2) There must not be any deformations on the housing, color lenses, fixations and

installation spots (ceiling, suspension, trussing).

3）Mechanically moved parts must not show any traces of wearing and must not

rotate with unbalances.

4）The electric power supply cables must not show any damage, material fatigue or

sediments.

Further instructions depending on the installation spot and usage have to be adhered

by a skilled installer and any safety problems have to be removed.

In order to make the lights in good condition and extend the life time, we suggest a

regular cleaning to the lights.

1) Clean the inside and outside lens each week to avoid the weakneness of the

lights due to accumulation of dust.

2) Clean the fan each week.

detailed electric check by approved electrical engineer each three month,

make sure that the circuit contacts are in good condition, prevent the poor

contact of circuit from overheating.

We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth.

Never use alcohol or solvents.

There are no serviceable parts inside the device. Please refer to the instructions

under “ Installation instructions ” .

Should you need any spare parts, please order genuine parts from your local dealer.

DMX512, Master-Slave, Sound Activated and auto operation

Built-in programs that could be called up via a DMX controller

0-20Hz strobe effect and pulse strobe effect

0-100% electronic dimming and blackout for all LEDs

Independent ID address

Different white colors setting

25 °beam angle

4-button LED display on rear panel

Dual bracket system available for setting the fixture on the ground or hanging

Linkable via 3-pin XLR cables

Overheat protection

-20 °-40 °C environment temperature

TO.8A fuse

9. Technical

Technical

Technical Specifications

Specifications

Input Voltage: AC 90- 2 6 0V/50-60HZ

LED Quantities: 18PCS 10W 4-in-1 LEDs

Control Signal: DMX512, auto or sound activated

Power Consumption: 199W

Dimensions: 324x220x262.4mm

Packing Dimensions: 305x 305x 280mm

Net Weight: 5.5 kgs

Gross Weight: 6 kgs

2. S

S afety

afety

afety I

I nstructions

nstructions

This device has left the factory in perfect condition. In order to maintain this condition

and to ensure a safe operation, it is absolutely necessary for the user to follow the

safety instructions and warning notes written in this user manual.

If the device has been exposed to temperature changes due to environmental

changes, do not switch it on immediately. The arising condensation could damage

the device. Leave the device switched off until it has reached room temperature.

This device falls under protection-class I. Therefore it is essential that the device be

earthed.

The electric connection must carry out by qualified person.

The device shall only be used with rate voltage and frequency.

Make sure that the available voltage is not higher than stated at the end of this

manual.

Make sure the power cord is never crimped or damaged by sharp edges. If this would

be the case, replacement of the cable must be done by an authorized dealer.

Always disconnect from the mains, when the device is not in use or before cleaning it.

Only handle the power cord by the plug. Never pull out the plug by tugging the power

cord.

During initial start-up some smoke or smell may arise. This is a normal process and

does not necessarily mean that the device is defective, it should decrease gradually.

Please don't project the beam onto combustible substances.

Fixtures cannot be installed on combustible substances, keep more than 50cm

distance with wall for smooth air flow, so there should be no shelter for fans and

ventilation for heat radiation.

If the external flexible cable or cord of this luminaire is damaged, it shall

be exclusively replaced by the manufacturer or his service agent or a similar qualified

person in order to avoid a hazard.

3. Operation

Operation

Operation Instructions

Instructions

-The moving head is an LED wash light for onsite decoration purpose .

-Don ’ t turn on the fixture if it ’ s been through severe temperature difference like

after transportation because it might damage the light due to the environment

changes. So make sure to operate the fixture until it is in normal temperature .

- This light should be keep away from strong shaking during any transportation or

movement.

-Don ’ t pull up the light by only the hea d, or it might cause damages to the

mechanical parts.

- Don ’ t expose the fixture in overhea t, moisture or environment with too much

dust when installing it. And don ’ t lay any power cables on the floor. Or it might

cause electronic shock to the people.

- Make sure the installation place is in good safety condition before installing the

fixture.

-Make sure to put the safety chain and check whether the screws are screwed

properly when installing the fixture.

- Make sure the lens are in good condition. It ’ s recommended to replace the units

if there are any damages or severe scratch.

- Make sure the fixture is operated by qualified personnel who knows the fixture

before using.

- Keep the original packages if any second shipment is needed.

- Don ’ t try to change the fixtures without any instruction by the manufacturer or

the appointed repairing agencies.

-It is not in warranty range if there are any malfunctions from not following the

user manual to operate or any illegal operation, like shock short circuit, electronic

shock, lamp broke, etc.

152-159 R 100% G 50% B 100%

160-167 R 100% G75% B100%

168-175 R 100% G 100% B 100%

176-183 R 100% G 100% B 25%

184-191 R 100% G 100% B 50%

192-199 R 100% G 100% B 75%

200-207 R 100% G 100% B 100%

208-215 R 20% G 100% B 100%

216-223 R 40% G 100% B 100%

224-231 R 60% G 100% B 100%

232-239 R 80% G 100% B 100%

240-247 R 20% G 100% B 100%

248-255 R 50% G 50% B 50%

8. Features

Features

18 PCS high power 10W 4 in 1 LEDs

50000 hours life span and low power consumption

Aluminum die-casting structure design with optimum cooling system

Infinite RGBW color mixing system and rainbow effect

16.7million additive RGB colors whit full saturation control

9 DMX channel s

7. DMX

DMX

DMX Channels

Channels

Channel Function Value Description

1 Dimmer 0-255 0-100% Linear Dimmer

2 Red 0-255 0-100% Red Dimmer

3 Green 0-255 0-100% Green Dimmer

4 Blue 0-255 0-100% Blue Dimmer

5 White 0-255 0-100% White Dimmer

6 Strobe 0-255 Strobe effect from slow to fast, speed adjustable

Preset

Program

0-127 Blackout

128-255 Fade in fade out: CH6 to adjust the speed

Preset

Program

0-127 Blackout

128-191 Color Chasing: CH6 to adjust the speed

192-255 Color Chasing ：Random speed unadjustable

Color

Macro

0-007 OFF

008-015 R 100% G 20% B

016-023 R 100% G 40% B

024-031 R 100% G 60% B

032-039 R 100% G 80% B

040-047 R 100% G 100% B

048-055 R G 100% B

056-063 R G 100% B 20%

064-071 R G 100% B 40%

072-079 R G 100% B 60%

080-087 R G 100% B 80%

088-103 R G B 100%

104-111 R 20% G B 100%

112-119 R 40% G B 100%

120-127 R 60% G B 100%

128-135 R 80% G B100%

136-143 R 100% G B 100%

144-151 R 100% G 25% B 100%

4. Installation

Installation

Installation s

-Please keep the fixture away from inflammable materials at least 0.5 meters.

WARNING: Use the hooks to fix at the handle of the fixture. and make sure the

place where you install the fixture is in safe conditions; and make sure it can

stand ten times weight as the fixture. Then test it for at least one hour to see

whether it is fine.

-You ' d better add second protection to avoid the lose of the spare parts.

Please fix the fixture with the safety chain during installation which has to bear at

least the weight ten times as the light.

5. DMX-512

DMX-512

DMX-512 control

control

control connections

connections

Connect the provided XLR cable to the female 3-pin XLR output of your controller and

the other side to the male 3-pin XLR input of the moving head. You can chain multiple

Moving head together through serial linking. The cable needed should be two core,

screened cable with XLR input and output connectors. Please refer to the diagram below.

DMX-512 connection with DMX terminator

For installations where the DMX cable has to run a long distance or is in an electrically

noisy environment, such as in a discotheque, it is recommended to use a DMX terminator.

This helps in preventing corruption of the digital control signal by electrical noise. The

DMX terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2

and 3,which is then plugged into the output XLR socket of the last fixture in the chain.

Please see illustrations below.

PIN 3

PIN 2

120

6. Operations

Operations

Press the MENU button until it shows AXXX in the display. XXX is the address you set

last time. Press UP or DOWN button to select your desired address, etc, A001. Press

ENTER button to save or press MENU button to exit.

Auto Operation

Press MENU button until it shows one of the following:

-FLAS: means strobe effect

-FADE: means fade in and fade out effect

-ASC-: means automatic color change effect

Press UP or DOWN button to select one of them, the device will be operated

automatically by the built-in programs. Press ENTER button, the last two digits in the

display will show 00-12. This is the speed of different built-in programs. Press UP or

DOWN button to select. Press ENTER button to save or press MENU button to exit.

Sound Operation

Press the MENU button until it shows on of the following:

-SOUF: means sound-active effect (mode 1)

-SOUD: means sound-active effect (mode 2)

Press UP or DOWN button to select. Press ENTER button to save (the device will be

operated by the sound signal received by built-in microphone) or press MENU button

to exit.

Manual Operation

Press the MENU button until it shows C1-C4 in the display. C1-C4 means RED,

GREEN, BLUE and White color respectively.

Press UP or DOWN button to select C1, C2, C3 or C4. Press the ENTER button, the

last two digits in the display will show 00-12. This is the level of the manual dimmer.

Press ENTER button to save or press MENU button to exit.

Tabla de contenidos

Otros manuales de Equipo de DJ de Color imagination

Color imagination

Color imagination SI-018L Manual de usuario

Color imagination

Color imagination SI-166 Manual de usuario

Color imagination

Color imagination LEDPAR 64 Manual de usuario

Color imagination

Color imagination MINISPOT 50 SI-098 Manual de usuario

Color imagination

Color imagination LEDARC 543 Manual de usuario

Color imagination

Color imagination LEDPAR 36AS 7*10W 4IN1 SI-016 Manual de usuario

Color imagination

Color imagination SI-027 Manual de usuario

Color imagination

Color imagination LED-PAR36X3W-RGB SI-018D Manual de usuario

Color imagination

Color imagination LEDPAR 915IP Manual de usuario

Color imagination

Color imagination SI-018R Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario