Color Block Color Cube CBLIGHTSPKS Manual de usuario
COLOR CUBE
CBLIGHTSPKS / CBLIGHTSPKM / CBLIGHTSPKL
EN
SPECIFICATION :
1. Adapter： Input 85-240AC Output 5V/1~2A
2. RGB LEDS
3. Charging time： 6-8H
4. Working time： After full charge, Lighting could work 4-6H
5. Bluetooth name : COLOR CUBE
6. No need Password normally, But some mobile phone maybe
need, the password is : 0000
7. Bluetooth range 10M. receive range will be reduced as the
battery voltage decrease
8. Water resistance : IP44
OPERATION
Charge the light—First step.
WARNING! Never charge the product in a pool, water, or in rain.
Charge in a dry, indoor
Insert the adaptor plug into the socket, (Photo 1)
Connect the external adapter to the electrical outlet.
It will begin to charge and charging indicator light will be on red.
Charging indicator light will be turn to green after full charged,
Please cover the charge cap after fully charged.
Bluetooth light will keep the same working mode you are
operating when charge in the case of electricity is not exhausted.
%OXHWRRWKOLJKWZLOOȵDVKZKHQFKDUJHLQWKHFDVHRIHOHFWULFLW\LV
exhausted. (Photo 1)
the external adapter should not be used outdoor, not exposed to
rain, humidity, and liquid, or heat.
OPERATION BY REMOTE CONTROL
NOTE: First remove the small plastic sheet from the battery cover before below operation
1. Brightness intensity and speed button :
Adjust the speed under smooth modes. Change
EULJKWQHVVLQWHQVLW\ZKHQWKHOLJKWLVȴ[HGRQ
one single color.
2. Light ON/OFF button: Press this button to
SRZHUWKHOLJKWRQDQGR3RZHURQLVWKHȴUVW
step for all functions on remote control.
Once the color cube is power on, press ON/OFF
EXWWRQDJDLQLVRQO\WRWXUQRQRURWKH
lighting, If theBluetooth is connected, Press ON/OFF button does
QRKDVHHFWWR%OXHWRRWK7KLVFRORUFXEHKDVPHPRU\VWRUDJH
function when electricity is not exhausted.
The light could keep the same lighting working mode or color
ZKLFK\RXWXUQHGRODVWWLPH)RUH[DPSOHODVWWLPH\RXWXUQHG
R WKH OLJKW RQ Ȋ5('ȋ PRGH WKLV WLPH \RX SUHVV WKH 212))
button, the mode will still be on “RED” mode.
When electricity is used exhausted last time, there will be no
memory storage function. After fully charged, you press the
ON/OFF button, the initial mode is on “SMOOTH” mode.
charge hole and cap
Charge indicator, charging
indicator light will be on red.
Charging indicator light will be
turned to green after full charged
photo 2
photo 1
OFF
ON
OFF
ON
3. Press this button to turn on and turn off Bluetooth. after
press the button, once the Bluetooth is on, The Bluetooth
indicator light will start to flash in Blue color and a voice “power
on “ come out , then use your mobile phone Bluetooth to match
the “COLOR CUBE” Bluetooth, Once the Bluetooth is connected
with your mobile phone, Bluetooth indicator light will be kept on
blue color but not flash and a voice “Speaker connected “ come
out , (Photo 2);
While connected, If you go away more than 10 Meters, The
Bluetooth indicator light will return to flash in Blue color and a
voice “speaker disconnected “ come out , your mobile phone will
be disconnected with the speaker;
If you go back to the speaker less than 10 Meters, Bluetooth
indicator light will be kept on blue color but not flash and a voice
“Speaker connected “ come out again and your Mobile phone will
connected the speaker automatically;
Bluetooth indicator light is inside the cube and could looks below
the speaker ;
Once the Bluetooth is connected, Press the button again the
Bluetooth will be off.
The Bluetooth indicator light will be off once the Bluetooth is off
(After Bluetooth is off and then
press and power on the BlueTooth again, you must manual
connect the speaker);
One mobile phone only could match with one Bluetooth to play
music at the same time.
4. Color selection button：When the light is on Press
this button to choose your favorite color as shows
on remote control (Six colors).
photo 3
Bluetooth indicator
light (Inside)
5. + White color warm increase button: When the light is on,
Press this button to change the white color to more warm. Total
11 stages;
6. - White color warm decrease button: When the light is on,
Press this button to change the white color to more cold. Total 11
stages;
7. Color selection button ： When the light is on, Press this
button to choose your favorite colors (Total 7 colors)
8. Music Flash Button: the light will flash with the music
automatically.
9. Smooth Button: 7colors scrolling automatically.
10. “time” : Once you power on the light, the counter down is
not acted and it will work
- Continuously. If you press the time Button once, the counter
down is acted and the light mode will be “Red” Mode, and it will
work 30 minutes and then shut off the light and Bluetooth
automatically after 30 minutes;
- If you press the time Button 2 times, the counter down is acted
and the light mode will be “Green” Mode ,and it will work 60
minutes and then shut off the light and Bluetooth automatically
after 60 minutes;
- If you press the time Button 3 times, the counter down is acted
and the light mode will be “Blue” Mode ,and it will work 90
minutes and then shut off the light and Bluetooth automatically
after 90 minutes;
- If you press the time Button 4 times, the counter down is acted
and the light mode will be “Yellow” Mode ,and it will work 120
minutes and then shut off the light and Bluetooth automatically
after 120 minutes;
- If you press the time Button 5 times, the counter down is acted
and the light mode will be “Qing” Mode ,and it will work 150
minutes and then shut off the light and Bluetooth automatically
after 150 minutes;
- If you press the time Button 6 times, the counter down is acted
and the light mode will be “Violet” Mode ,and it will work 180
minutes and then shut off the light and Bluetooth automatically
after 180 minutes;
- If you press the time Button 7 times, the counter down is not
acted and the light mode will be “White” Mode ,and it will work
continuously.
11.Previous Button： When the Bluetooth is connected and
music is on, Press this button to select previous music.
12. Next Button： When the Bluetooth is connected and
music is on, Press this button to select next music.
13. Pause and Play：When the Bluetooth is connected and
music is on, Press this button to play or pause the music.
14. Voice- and +：When the Bluetooth is connected and
music is on, Press the “-” to reduce volume, Press“+” to increase
volume.
BATTERY REPLACEMENT (FOR REMOTE CONTROL)
If remote control fails to activate the light, replace the battery.
- Press the tab on side of battery cover and
then slide off the cover from the remote control
- Take out the battery and replace a new one.
Pay attention to the polarity of battery on the
cover and cover direction when installing them
back to the remote control.
Warning!
- Make sure that battery is inserted the right
way around and with the correct polarity
- Remove exhausted battery from the product
- The supply terminals are not to be
short-circuited
- Dispose of battery safely.
CARING FOR YOUR LIGHT
- Always POWER OFF the light after use.
- Use clean water to rinse the light after use, and dry with a clean
cloth.
- Store the light out of reach of children
DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead it
shtould be taken to an applicable collection point for the
recycling of electrical and electronic equipment. By ensuring that
this equipment is disposed of correctly you will help prevent
potential negative consequences for the environment and
human health, which could otherwise be caused by inappropri-
ate waste handling of this product. The recycling of materials will
help to conserve natural resources. For more information please
contact your local council or waste disposal service
IMPORTANT SAFEGUARDS & PRECAUTIONS
01. Do not disassemble; there are no serviceable parts inside.
02. Do not use if the equipment is damaged.
03. For external cleaning, use a soft, clean, damp cloth only.
04. Use of detergents may damage the cabinet finish.
05. Only use the cables that are supplied with this equipment.
06. This device is not designed to be used by anyone (including
children) with impaired physical, sensory or mental capacity, or
by anyone without appropriate experience or knowledge unless
they have received prior guidance or instructions related to the
use of this device from someone who is responsible for their
safety. Children should be supervised to ensure that they do not
play with the device.
IMPORTANTS SAFEGUARDS & PRECAUTIONS
Environmental information (Applicable in the European Union
and other European countries with separate collection systems).
Disposal of waste batteries. This product may contain batteries. If
so, this symbol on the batteries means that they shall not be
disposed with other household waste. Instead they shall be
handed over to the appropriate collection point for the recycling
of batteries. The batteries do not contain either Mercury,
&DGPLXP RU OHDG DERYH WKH OHYHOV GHȴQHG E\ WKH EDWWHU\
directive 2006/66/EC. For your safety, please view the product
manual how to remove the batteries from the product safely. For
integrated battery This product contains a Lithium ion/polymer
battery that should only be removed by an authorised recycling
centre. By recycling this product at your local authorised
recycling centre, or the place of purchase, the battery will be
removed and recycled separately.
RTTE : Hereby, Bigben Interactive SA, declares that the CBLIGHT-
SPK device complies with the essential requirements of the
directive 1995/5/EC of the European Parliament and of the
Council of 9 March 1999 on radio equipment and telecommuni-
cations terminal equipment and the mutual recognition of their
conformity. To download the full statement, please visit our
website: http://www.bigben.eu/support and the section
`declaration of conformity’.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Idiomas:
Otros manuales de Oradores de Color Block
