Coffee Queen Fast Mash New Manual de usuario
User Guide
FAST MASH NEW
Rev. 120127
U / EN
Your Dealer
...............................................................................
...............................................................................
1. Contents Fast Mash New
1. Contents page 2
2. General 3
3. Component overview, front 4
3. Component overview, inside 5
3. Component overview, programming electronics 6.
3. Component overview, function buttons 7
4. SERVICE: Installation and Start-up
Position machine 8
Hook up water to machine 8
Start the mash machine 8
Fill ingredients in container 9
5. OPERATION
Portion preparation 10
6. CLEANING Every day
Rinsing the blender system: 11
Rinsing the blender system 11
Remove blender system 12
Wash parts 12
Re-install blender system 12
7. Error message 13
8. PROGRAMMING
Use code, adjust the recipe value 14- 18
9. Reset the cup counter 19
10. Storage and transportation 20
11. Dimension sketch 21
12. Cleaning and care 22
2.
2. General Fast Mash New
Thank you for choosing a Fast Mash mash machine. We hope you enjoy it!
- The machine must be connected correctly for your own safety.
Read the user guide before using the machine.
- The guide contains important instructions for proper and safe use of the machine.
- Always keep the guide close at hand.
Fast Mash is the mash machine that makes it possible for you to quickly
and easily serve freshly made mash in portions.
- 2 selection of portion (see chart, recipe)
- 1 ingredients container
- Electronic temperature control
- Cleaning function
- Rinsing function on outside
Facts;
Height 536 mm
Width 211 mm
Depth 446 mm
Power supply 230V/2200W
Cold water hook-up ½" external thread for fitting factory-supplied tube
3.
3. Component view, front. Fast Mash New
4.
Tap for
mash
Holder for mash scoop
Drip tray
insert
Drip tray
Connection of
power cord
Service plug
Emptying of water tank
Water hook-up
Selection buttons for mash
3. Component view, inside Fast Mash New
5.
Concentrator
Concentrate
container for
mash
ON/OFF
switch
4 Amp fuse
Cleaning button
Condensation trap
Blender cups
3. Component overview, electronics Fast Mash New
6.
Programming
electronics
The programming electronics is placed behind the concentrate container.
3. Component overview, function. Fast Mash New
7.
Function buttons
1. Large mash.
2. Small mash.
3. Rinsing. (Use the rinse function regularly)
4. Clean blender system.
5. Ready lamp
- The lamp stops blinking when the machine is ready.
- The lamp blinks when a drink is being dispensed.
1
2
3
5
4
4. Service. Installation and start-up Fast Mash New
1. Place the machine on a flat Connect the plug to an
waterproof surface. earthed 230V 10A wall outlet.
Note: Make sure air is able to circulate freely
behind the machine.
2. Connect the factory-supplied tube to the cold water feed using a ½” R- connection
piece. Make sure no folding or sharp bending occurs when you push the machine
back in place.
If the water pipeline is new, flush the system with water first to remove
copper shavings. These can damage the inlet valve.
3. Open the water tap.
4. Hit the ON/OFF switch inside the panel.
The water tank will fill automatically with
1.8 litres of water.
The element will not be powered until the water
reaches the level indicator.
the temperature is set to 85º Celsius.
5. Shut the panel door. The mash machine is ready
to be used within approx. 10 minutes.
8.
ON/OFF
switch
9.
(A).
4. Service. Installation and start-up Fast Mash New
6. Fill ingredients in container
Remove the concentrate container to avoid
spilling the concentrate in the machine) and fill
with ingredients.
1. Twist the concentrate tube up out of the
blender cup.
2. Lift the front edge of the concentrate
container and pull out.
3. Lift the lid and fill with concentrate.
7. When placing the concentrate container
Make sure the concentrate tube is close to
the condensation traps (A), as illustrated.
10.
5. OPERATION; Portion preparation. Fast Mash New
Portion preparation:
1.Place the mash scoop in the holder (A).
2. PRESS the button Large or Small Mash once.
The potato mash machine will make one portion of potato mash of the
size set.
3. Wait until the light stops flashing before removing the mash scoop.
B
A
Tabla de contenidos
Otros manuales de Electrodoméstico de cocina de Coffee Queen
