Cobalt Digital Inc HPF-9000 Manual de usuario

2506 Galen Drive

Champaign, IL 61821

Voice 217.344.1243 • Fax 217.344.1245

www.cobaltdigital.com

Product Manual

HPF9000-OM (V1.8)

Cobalt Digital Inc.

High-Power 20-Slot Frame

HPF-9000

Duplication or distribution of this manual and any information contained within is strictly prohibited without the express written

permission of Cobalt Digital Inc. This manual and any information contained within, may not be reproduced, distributed, or

transmitted in any form, or by any means, for any purpose, without the express written permission of Cobalt Digital Inc.

Reproduction or reverse engineering of software used in this device is prohibited.

Disclaimer

The information in this document has been carefully examined and is believed to be entirely reliable. However, no responsibility

is assumed for inaccuracies. Furthermore, Cobalt Digital Inc. reserves the right to make changes to any products herein to improve

readability, function, or design. Cobalt Digital Inc. does not assume any liability arising out of the application or use of any

product or circuit described herein.

Trademark Information

Cobalt®is a registered trademark of Cobalt Digital Inc.

FUSION3G®is a registered trademark of Cobalt Digital Inc. COMPASS®is a registered trademark of Cobalt Digital Inc.

openGear®is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross Video Limited.

Congratulations on choosing the Cobalt®HPF-9000 High-Power 20-Slot Frame. The HPF-9000 is part of a full

line of modular processing and conversion gear for broadcast TV environments. The Cobalt Digital Inc. line

includes video decoders and encoders, audio embedders and de-embedders, distribution amplifiers, format

converters, remote control systems and much more. Should you have questions pertaining to the installation or

operation of your HPF-9000, please contact us at the contact information on the front cover.

Manual No.: HPF9000-OM

Document Version: V1.8

Release Date: January 11, 2018

Description of

product/manual

changes: - Minor consistency edits

HPF9000-OM (V1.8)

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer and in this manual.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as when the power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

This apparatus shall not be exposed to dripping or splashing. Do not place objects such as

water containers on the apparatus.

The AC mains power receptacle on the rear of the apparatus shall only be connected by

means of the power cord supplied with this apparatus. No other devices or cables shall be

connected to this connector. If the supplied AC power cord is damaged or lost, it shall only

be replaced using the AC power cord specified in this manual or by the manufacturer.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type.

To reduce the risk of fire, replacement fuses shall be the same type and rating as installed

and as specified on the rear label adjacent to the power receptacle fuse holder.

Warning

EMC Notices

US FCC Part 15

This equipment has been tested and found to comply with the limits for a class A Digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case users will be required to correct

the interference at their own expense.

Changes or modifications to this equipment not expressly approved by Cobalt Digital Inc.

could void the user's authority to operate this equipment.

CANADA

This Class "A" digital apparatus complies with Canadian ICES-003.

EUROPE

This equipment is in compliance with the essential requirements and other relevant

provisions of CE Directive 93/68/EEC.

INTERNATIONAL

This equipment has been tested to CISPR 22:1997 along with amendments A1:2000 and

A2:2002 and found to comply with the limits for a Class A Digital device.

HPF9000-OM (V1.8) HPF-9000PRODUCTMANUAL i

Table of Contents

Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Overview ................................................................................................................ 1-1

Manual Conventions............................................................................................... 1-1

Warnings, Cautions, and Notes .................................................................. 1-2

Labeling Symbol Definitions...................................................................... 1-2

Safety Summary ..................................................................................................... 1-3

Warnings..................................................................................................... 1-3

Cautions...................................................................................................... 1-3

HPF-9000 Functional Description.......................................................................... 1-3

Frame Rear I/O Modules............................................................................ 1-5

Frame Card Capacity and Rear I/O Modules ............................................. 1-5

Frame Network Interface............................................................................ 1-8

Technical Specifications....................................................................................... 1-10

Warranty and Service Information ....................................................................... 1-11

Cobalt Digital Inc. Limited Warranty....................................................... 1-11

Contact Cobalt Digital Inc.................................................................................... 1-12

Chapter 2 Installation and Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Overview ................................................................................................................ 2-1

HPF-9000 Controls and Indicators......................................................................... 2-1

HPF-9000 Front Panel Controls and Indicators ......................................... 2-1

HPF-FC Network Controller Card Indicators ............................................ 2-1

ii HPF-9000 PRODUCT MANUAL HPF9000-OM (V1.8)

Installing the Frame................................................................................................. 2-3

HPF-9000 Dimensional Drawings.............................................................. 2-3

Frame PSU Power Output Considerations.................................................. 2-4

Ventilation Considerations.......................................................................... 2-4

Status Reporting and Displays Considerations Using DashBoard™.......... 2-5

Installing Frame in Rack............................................................................. 2-5

Installing Frame Support Brackets.............................................................. 2-6

Cable Connections ...................................................................................... 2-7

Power Supply Removal/Installation............................................................ 2-8

Network Controller Card Removal/Installation.......................................... 2-8

Installing Rear I/O Modules and Cards................................................................... 2-9

Rear I/O Module Installation ...................................................................... 2-9

User Card Installation ............................................................................... 2-10

Setting Up Network Remote Control.................................................................... 2-11

Frame Setup Using DHCP ........................................................................ 2-12

Frame Setup Using Static IP Address....................................................... 2-16

Network Controller Card Address Mode Switch...................................... 2-21

Setting Network Controller Card/Frame User Access.............................. 2-22

Setting Network Controller Card to Mute Audible Alarms.................................. 2-23

Network Controller Card DashBoard Status and Settings Interfaces ................... 2-23

Frame Info Tabs........................................................................................ 2-23

Frame Setup and Auxiliary Function Control Tabs.................................. 2-25

Troubleshooting Network/Remote Control Errors................................................ 2-29

Using a Log for Managing Frames ....................................................................... 2-31

HPF9000-OM (V1.8) HPF-9000 PRODUCT MANUAL 1-1

Chapter 1

Chapter 1 Introduction

Overview

This manual provides installation and operating instructions for the HPF-9000

High-Power 20-Slot Frame (also referred to herein as the HPF-9000 or

“frame”).

This manual consists of the following chapters:

•Chapter 1, “Introduction”–Provides information about thismanual

and what is covered. Also provides general information regarding the

HPF-9000.

•Chapter 2, “Installation and Setup”–Provides instructions for

installing the HPF-9000, installing Rear I/O Modules and cards, and

setting up the Network Controller Card.

This chapter contains the following information:

•Manual Conventions (p. 1-1)

•Safety Summary (p. 1-3)

•HPF-9000 Functional Description (p. 1-3)

•Technical Specifications (p. 1-10)

•Warranty and Service Information (p. 1-11)

•Contact Cobalt Digital Inc. (p. 1-12)

Manual Conventions

In this manual, connectors are shown using the exact name shown on the

HPF-9000 itself. In this manual, the terms below are applicable as follows:

•HPF-9000 refers to the HPF-9000 frame that houses the Cobalt®or

other openGear®-compliant cards.

•Device and/or Card refers to an openGear®-compliant card that is

installed in the frame.

•System and/or Video System refers to the mix of interconnected

production and terminal equipment served by the frame.

•Functions and/or features that are available only as an option are

denoted in this manual like this:

1Manual Conventions

1-2 HPF-9000 PRODUCT MANUAL HPF9000-OM (V1.8)

Warnings, Cautions, and Notes

Certain items in this manual are highlighted by special messages. The

definitions are provided below.

Warnings

Warning messages indicate a possible hazard which, if not avoided, could

result in personal injury or death.

Cautions

Caution messages indicate a problem or incorrect practice which, if not

avoided, could result in improper operation or damage to the product.

Notes

Notes provide supplemental information to the accompanying text. Notes

typically precede the text to which they apply.

Labeling Symbol Definitions

Important note regarding product usage. Failure to observe may result in

unexpected or incorrect operation.

Electronic device or assembly is susceptible to damage from an ESD

event. Handle only using appropriate ESD prevention practices.

If ESD wrist strap is not available, handle card only by edges and avoid

contact with any connectors or components.

Symbol (WEEE 2002/96/EC)

For product disposal, ensure the following:

•Do not dispose of this product as unsorted municipal waste.

•Collect this product separately.

•Use collection and return systems available to you.

HPF9000-OM (V1.8) HPF-9000 PRODUCT MANUAL 1-3

Introduction Safety Summary

Safety Summary

Warnings

Cautions

HPF-9000 Functional Description

The HPF-9000 is an openGear®-compatible12RU high-density modular

frame offering 360 Watts of net (user) available power in a high-capacity

20-slot format. (Maximum card capacity is determined by card model(s)

installed and other factors (see Frame Card Capacity and Rear I/O Modules

on page 1-5).

High power-density power supplies (single standard, redundant second

optional) and engineered cooling/ventilation design allow 10 high-power

cards in a frame (10 x 36 W = 360 W), or 20 medium-power cards in a frame

(20 x 18 W = 360W). Separate forced-air cooling paths are provided for the

card area and the power supply areas. An intelligent fan controller adjusts fan

speed with changes in power supply loading and temperature.

The HPF-9000 can accommodate two front-loaded PSU-9000 power supply

modules. Adding a second (optional) supply gives the frame full power

redundancy. The PSU-9000 power supply unit is interchangeable as a primary

or redundant power supply module, with supplies in either position being

hot-swapable. Each power supply contains an independent cooling fan and a

front-mounted power switch.

The HPF-FC Network Controller Card (furnished as standard on the

HPF-9000 frame) allows Ethernet connectivity to any number of connections

for full multi-point control and monitoring via free DashBoard™software.

The frame is equipped with two independent reference buses that can supply a

selected reference to cards within the frame.

! WARNING ! To reduce risk of electric shock do not remove line voltage service barrier cover on frame

equipment containing an AC power supply. NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION This device is intended for environmentally controlled use only in appropriate video

terminal equipment operating environments.

CAUTION Heat and power distribution requirements within a frame may dictate specific slot

placement of cards. Cards with many heat-producing components should be arranged to

avoid areas of excess heat build-up. As such, avoiding placing the card adjacent to other

cards with similar dissipation values if possible.

1. openGear®is a registered trademark of Ross Video Limited. DashBoard™is a trademark of Ross

Video Limited.

1HPF-9000 Functional Description

1-4 HPF-9000 PRODUCT MANUAL HPF9000-OM (V1.8)

Figure 1-1 HPF-9000 (Front View)

Figure 1-2 HPF-9000 (Rear View)

Primary 360W Power Supply (PSU1)

Card User Slot Area

(20 User Slots

Network Controller Card

Optional Redundant 360W

Power Supply (PSU2)

Retractable Fan

Door (5 fans)

Primary Power Supply

(PSU1) IEC AC

Line Connector

Dual Looping

Reference

Connectors

Network

Ethernet

Connector

Redundant Power Supply

(PSU2) IEC AC

Line Connector

Rear I/O Module Area

Tabla de contenidos

Otros manuales de De oficina de Cobalt Digital Inc

Cobalt Digital Inc

Cobalt Digital Inc OG-PC-x86-A Manual de usuario

Manuales populares de De oficina de otras marcas

HP m9060n - Pavilion - Elite Hoja de especificaciones

Asus

Asus E210 Series Manual de usuario

Dell

Dell Inspiron 600m Manual de usuario

Dell

Dell Inspiron 3662 Manual de usuario

TotalFlow

TotalFlow uFLO Manual de usuario

HP Presario SV7000 - Desktop PC Manual de usuario

HP ProDesk 400 G5 Manual

Logitech

Logitech MK320 Manual de usuario

Dell

Dell XPS 730 H2C Manual de usuario

Sony

Sony Vaio Series Manual de usuario

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manual de usuario

Alto

Alto MD 250 Manual de usuario

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series Manual de usuario

Sony

Sony VAIO VGX-TP1 Series Manual de usuario

Asus

Asus Eee Box B204 Manual de usuario

Dell

Dell Optiplex 9010 All In One Manual de usuario