Coantec C68 Series Manual de usuario

Industrial Videoscope

User Manual

COANTEC C68 Series

Please read the User Manuals carefully before using this instrument.

The User Manuals are applicable to Coantec C68 series videoscope. The copyright

is the property of Coantec Ltd. The contents of the User Manuals are protected by

Chinese laws and regulations pertaining to copyright. Without the written permission of

Coantec, the duplication, copy or translation of the User Manuals or any data and

information contained, or circulation of the User Manuals in any form will not be

allowed. Anyone who violates this will be held legally liable for relevant consequences.

Notice:

The Company is committed to continuously improving product functionality and

service quality and it reserves the right to change any product and software program

described in the User Manuals and the contents of the User Manuals without prior notice.

We have rigorously proofread and repeatedly reviewed the User Manuals. Even so, we

may not guarantee that all errors and omissions are eliminated. The User Manuals only

serve as a guidance to help the user use the Coantec instrument properly. However, it

does not represent any description of the software and hardware configuration of this

product.

In case of any questions, please call our after-sales service personnel. Tel.: +86

-755-89728626

 
1
Contents 
User Notices.............................................................................................2
1 Purpose and Application Scope .....................................................2
2 Repair and Refitting.......................................................................2
3 Safety Precautions..........................................................................2
Products Description................................................................................4
Operation Process ....................................................................................5
User Manuals...........................................................................................6
1 Buttons and Interfaces ...................................................................6
2 Operation Interface ........................................................................9
3 User Management........................................................................13 
4 Movement Control.......................................................................14 
5 Speed Control ..............................................................................16 
6 Illuminance Control .....................................................................17 
7 Image Quality Adjustment ...........................................................18 
8 Photo/Video .................................................................................19 
9 Image Comparison.......................................................................21 
10 File Preview ...............................................................................21 
11 Picture Editing ...........................................................................24 
12 Report Generation......................................................................25 
13 File Reading...............................................................................26 
14 Video Output..............................................................................27 
3D Measurement....................................................................................27 
1 Measurement Interface.................................................................27 
2 Measurement Steps......................................................................30 
Cable Assembly and Disassembly .........................................................39 
Basic Configuration ...............................................................................41 
Storage and Maintenance.......................................................................41 
Analysis and Troubleshooting of Common Faults.................................43 

1. User Notices

1.1 Purpose and Application Scope

This product is only applicable to real-time industrial examination and

analysis. It can directly check the inner surfaces of pipes, turbines, cylinders,

engines and other devices for defects and abnormalities. This product is

characterized by direct viewing and supports real-time photo taking and video

recording, enabling the user to collect relevant data.

1.2 Repair and Refitting

This product has no parts or components that can be repaired by the user.

Do not try to disassemble, refit or repair the instrument by yourself, and Coantec

will not assume any responsibility for injury or loss caused to the user thereby.

This product can only be repaired by Coantec and its authorized dealers.

1.3 Safety Precautions

• When using this product, please observe the following instructions

to avoid accidental injury or instrument damage due to improper

operations:

① Do not use this instrument to check human or animal bodies.

② Do not work on the object under test while it is electrified in order to avoid

electric shock.

③ Do not touch the lens end with a bare hand during operation; otherwise, it

may cause burns.

④ Do not look directly at the strong light from the front end of the probe at

close range as it may affect your vision.

⑤ Do not bend, stretch, twist or roll over the tube excessively.

⑥ The image will be blurred if the lens is stained. Please wipe the lens clean

with a lint-free wiper dipped in a little alcohol before using the instrument.

⑦ Keep the insertion tube away from liquids other than water, saline, engine oil

and light oil.

⑧ Please clean the instrument in time after use.

⑨ Make sure that the insertion tube is straightened before turning on the

instrument. Do not make turns when the insertion tube is curled up. During

operation, toggle the joystick slowly to control the probe orientation and do not

keep the probe at the maximum bending angle for a long time; otherwise, its

service life will be affected.

⑩ If the instrument does not function properly, please stop examination

immediately and adjust the probe to the middle position, carefully retract the

insertion tube and turn off the instrument. Contact the manufacturer or

distributor in time.

2. Products Description

The Coantec C68 series high-performance industrial videoscope is a new

visual inspection instrument independently developed by Coantec for

non-destructive testing. It features a high-quality image sensor, an IPS

wide-view HD LCD touch panel and advanced image processing technology,

delivering high-quality images of accurate color and more details. The

combination of the electric joystick and the virtual joystick on the touch panel

provides users with better manipulability, flexibility, and comfort. This

instrument enables users to see into areas that are impossible to examine with

the naked eye, offering a better guarantee for product quality and equipment

operation safety. It is applicable to the sectors of aviation, aerospace, energy,

electric power, chemicals, machinery, automobile, military, and special

equipment inspection.

3. Operation Process

① Unpacking of instrument: Open the instrument case and take out the host,

handle and umbilical cable. Please hold the probe properly during unpacking

and do not bump it. Connect the umbilical cable to the host and handle

according to the instructions.

② Preparation before turning on: Check whether all parts of the instrument are

in good condition, confirm that the battery and USB flash disk have been

correctly installed, and long press the power button to turn on the instrument.

③ Real-time examination: Extend the tube into the equipment or device to be

examined, and control the moving direction of the front-end probe by operating

the joystick.

④ Brightness adjustment: Adjust the brightness of the light source to obtain

appropriate illuminance and the clearest image possible.

⑤ Examination: Adjust the parameters such as the observation angle,

movement mode and speed of the probe as needed to examine the target in real

time, and carry out operations such as photographing, video recording, browsing

files and graffiti.

⑥ Tube retraction: Adjust the probe movement mode to the release to unlock

the probe for automatic resetting. Retract the tube slowly after it is

approximately straight.

⑦ Storage of instrument: Turn off the power switch, unplug the umbilical

cable, sort out and store all parts of the instrument into the case, close the upper

cover and fasten the lock catch.

4. User Manuals

4.1 Buttons and Interfaces

The functional buttons and interfaces of the C68 series industrial

videoscope are shown in Fig. 1 and Fig. 1-1, and the functional buttons and

interfaces for handle operation are shown in Fig. 1-2:

Fig. 1

Fig. 1-1

Electric Joystick Mechanical Joystick

Fig. 1-2

① Power/return/display or hide main menu button: Long press the button to

turn on/off the instrument; press the button briefly to display/hide the main

menu, or return to the parent menu.

② Menu selection button: Rotate the button to switch among the menus,

and press the button to select the current menu.

③ HDMI interface: The high-definition multimedia interface is used to

connect an external display to output video images.

④ VGA interface (optional): It is an analog signal output interface to

connect an external display for video image output.

⑤ USB3.0 interface: It is used to connect USB flash disk for image data

storage.

⑥ USB3.0 interface: It is used to connect USB flash disk for image data

storage.

⑦ HP interface: It is used to connect the headset for audio signal output.

⑧ Cable interface (host end): It is for the cable connecting the operating

handle to the host.

⑨ Bracket: It is used to adjust the sitting angle of the host.

⑩ Charging interface: It is used to connect an adapter for online charging of the

instrument.

Tabla de contenidos

Otros manuales de Equipo de diagnóstico de Coantec

Coantec

Coantec C50 Series Manual de usuario

Manuales populares de Equipo de diagnóstico de otras marcas

Mindray

Mindray M7Vet Guía de inicio rápido

Autel

Autel MaxiProgrammer 201 Manual de usuario

TEXA

TEXA TMD2 Manual de usuario

Autel

Autel MaxiIM IM608 Manual de usuario

Sealey

Sealey BT2012 Manual de usuario

Diagnoptics

Diagnoptics Age Reader Manual de usuario

LAUNCH TECH

LAUNCH TECH X-431 PRO5 Manual de usuario

Hella Gutmann

Hella Gutmann Mega macs X Manual de usuario

Foxwell

Foxwell I80TS Manual de usuario

KaVo

KaVo 3D eXam Manual de usuario

ATEQ

ATEQ VT46 Manual de usuario

Hella Gutmann

Hella Gutmann mega macs X Manual de usuario

Autel

Autel MaxiFlash VCMI Manual de usuario

Qiagen

Qiagen QIAcube Connect MDx Manual de usuario

Alber

Alber BDSU Manual de usuario

St. Jude Medical

St. Jude Medical QUANTIEN Manual de usuario

Bosch

Bosch DCU 100 Manual de usuario

Launch

Launch CNC-602A Manual de usuario