7
ENGLISH
Troubleshooting
Problem Possible cause Correction
Thefloodlight is not activated
by movement within
thedetection zone.
No mains voltage, blown fuse,
switch set to off.
Check theconnections,
fuses, switch.
Theenvironment is too bright. Redirect thesensor, or move
thesensor itself.
Incorrect positioning. Redirect thesensor.
Thefloodlight comes on for
no reason.
Heat sources, other lighting or
car headlights are activating
thesensor.
Redirect thesensor away
from interfering light sources.
Wild animals/birds, pets
activating thesensor.
Redirect thesensor.
Reflections from aswimming
pool or other reflecting surface.
Redirect thesensor.
Thefloodlight does not
turn off.
Continuous false triggering. Redirect thesensor.
The [TIME] setting is incorrect. Reduce thetime setting.
Thefloodlight comes on
during theday.
The [LUX] knob is set to full
daylight activation .
Adjust the [LUX] knob.
When the [LUX] setting is set
to , thedetection distance
is shortened.
Interference from sunlight. Re-test at night.
Cleaning
Wipe thePIR sensor’s diffuser with adamp cloth afew times ayear. Never remove thePIR
sensor housing. This may cause damage and invalidate theguarantee.
Responsible disposal
This symbol indicates that this product should not be disposed of with general
household waste. This applies throughout theentire EU. In order to prevent any
harm to theenvironment or health hazards caused by incorrect waste disposal,
theproduct must be handed in for recycling so that thematerial can be disposed
of in aresponsible manner. When recycling your product, take it to your local
collection facility or contact theplace of purchase. They will ensure that theproduct
is disposed of in anenvironmentally sound manner.
