32
RF Pilot Installation Manual
Content:
Before You Start.............................................2
Technical Parameters ....................................4
Characteristics...............................................5
Overview of RF Control Devices ...................6
Device Details ................................................8
Insertion of Batteries .....................................8
Basic Steps ....................................................9
Controller Activation....................................12
Programming Menu
Initial Setup - Language ..............................13
Initial Setup - Date & Time...........................14
Rooms..........................................................15
Actuators......................................................17
Actuator Functions ......................................22
Scenes .........................................................26
Favourites ....................................................32
Device Reset................................................38
On Screen Warnings ...................................39
Universal Information ..................................40
Important Information..................................41
Installation Form ..........................................42
Notes............................................................44
Contents
RF Pilot Installation Manual
Before You Start...
This Manual provides information for the use and installation of the device. The device may only be
installed and connected by persons with the required professional qualications who have become
thoroughly familiarized with this Manual and the functions of the device. Trouble-free operation also depends
on the previous method of transportation, storage and handling. Should you become aware of any signs of
damage, deformation, malfunction or of any missing parts, do not install this product and return it to the
vendor. After the expiry of its service life, the product and all its parts must be disposed of as electronic
waste. With consideration to the transmission of the RF signal, ensure that RF components are suitably
located in the building where the device is to be installed. The RF Control system must only be installed in
indoor areas. The device has not been designed for outdoor use or use in a moist environment, it must not
be installed in metal distribution boxes or plastic distribution boxes with metal doors as this would prevent
the transmission of the radio frequency signal. RF Control is not recommended for the control of devices
providing for vital life functions or for the control of risk devices such as lifts, pulleys etc. - radio frequency
transmissions can be hampered by an obstacle or interfered with, or the transmitter battery may become
depleted etc. thus disabling the remote control. Not suitable for use in an industrial environment.
Before You Start
