Caution
Your Cleral onboard weighing system is
a tool. Learning to work with it can only
make it more efficient. Read this manual
before using your Kiload.
Weigh bridge (certified)
Acquire the weights needed to calibrate
using a certified weigh bridge (Platform
scale). Whenever possible, record the
weights while sitting on the weigh
bridge.
Pneumatic connections
Make sure that all air connections are
made according to the installation dia-
grams.
Lift Axles
Lift axles should always be in the UP
position while acquiring and recording
the weights in the Kiload. If the vehicle
is equipped with an automatic lift axle
activation device, then you must acquire
and record the weights while the lift axle
is engaged (touching the ground) for
both empty and heavy calibration. And
use the system with lift axle down.
Fuel
To enhance the performance of your
Kiload, fuel tanks must be full to acquire
and record the weights.
Air leaks
A leak in the pneumatic system will fal-
sify the pressure readings for calibra-
tion. Thus , you will end up with erratic
and false weight readings. You most
likely have a leak if the readings are not
stable while your vehicle is stationary. A
frequent start of the compressor is a
good indication of an air leak.
Recalibration
Recalibration is necessary if you have
adjusted or replaced a leveling valve or
if you’ve replaced a mechanical sensor,
air transducer, or flexmeter.
Slopes
A slightly sloped terrain will not affect
the accuracy of your scale, but the big-
ger the inclination the higher the error
margin. Learning to work with your
Cleral system will ultimately give you
better precision in these conditions.
Technical Support
For technical help, consult your local
authorized Cleral dealer.
Warranty
Cleral products are warranted against
defects in workmanship for a period of
one year from the original date of pur-
chase. The defective covered product
will be repaired or replaced by the
manufacturer. The defective product
needs to be sent by your local dealer to
Cleral with proof of purchase. This war-
ranty does not cover injury or damages
caused by the use of this product. It also
does not cover all costs connected with
the replacement part ( labor, shipping
and handling or other). Cleral will not be
liable for fines issued for overweight
violations while using its products.
Contact your local Cleral dealer for re-
pairs and replacement parts.
Thank you for choosing and trusting
CLERAL CANADA
To contact Cleral Inc.
CLERAL INC.
90, des Distributeurs
Val-d’Or (Québec) Canada
J9P 6Y1
Tél. : (819) 825-5553
Fax : (819) 825-5556
Web : www.cleral.com
2
