Page 4
PL70-1046EN
07/08/2013
Cleco®
Contents
1 Safety 6
1.1 Warning and notes................................................................................................. 6
1.2 Basic requirements for safe working practices ......................................................7
1.3 Operator training.................................................................................................... 7
1.4 Personal protective equipment .............................................................................. 7
1.5 Designated use...................................................................................................... 8
1.6 Codes and standards ............................................................................................ 8
1.7 Noise and vibration................................................................................................ 8
2 Scope of supply, transport and storage 9
2.1 Items supplied ....................................................................................................... 9
2.2 Transport ............................................................................................................... 9
2.3 Storage .................................................................................................................. 9
3 Product description 10
3.1 General description ............................................................................................. 10
3.2 Operation and functional elements...................................................................... 10
4 Accessories 11
5 Before initial operation 12
5.1 Ambient conditions .............................................................................................. 12
5.2 Air supply............................................................................................................. 12
5.3 Connecting the air supply to the tool ................................................................... 12
5.4 Tool set up ...........................................................................................................13
6 First operation 14
6.1 Puting into use.....................................................................................................14
7 Troubleshooting 15
8 Maintenance 16
8.1 Service schedule ................................................................................................. 16
8.2 Lubricants ............................................................................................................ 17
9 Repair instructions 18
9.1 Motor case assembly........................................................................................... 18
9.2 Piston assembly .................................................................................................. 18
9.3 Direct drive models: assembly............................................................................. 19
9.4 Geared models: assembly................................................................................... 20
