Clearfield FieldSmart Manual de usuario

FieldSmart®Small Count Delivery (SCD) Panel

Installation Manual ______________________________________________________

Manual 020418 REV A - Dec 2018

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

FieldSmart®Small Count Delivery (SCD) Panel

Installation Manual _________________________________________________________

Manual 020418 REV A - Dec 2018

Table of Contents

Application 3

Description 3

Technical Specications 3

Ship Along Items 4

Installing Clearview Blue Cassettes 5

Installing Clearview xPAKs 6

Panel Mounting 9

Cable Mounting and Routing 12

Connector Cleaning Procedure 14

Standard Warranty 17

Proprietary Notice 18

Technical Support 18

FieldSmart®Small Count Delivery (SCD) Panel

__________________________________________________________ Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

Manual 020418 REV A - Dec 2018

Application

Description

Technical Specications

FieldSmart 1RU Small Count Delivery Panel - Rack

Dimensions 1.70” H x 17.24” W x 9.23” D (43.18 mm x 437.90 mm x 234.44 mm)

Ratings Compliant to Telcordia GR-449

Port Density 24 SC or 48 LC

Cassette Types Supported Clearview Blue and Clearview xPAK

Connector Types SC/UPC, SC/APC, LC/UPC, LC/APC, FC/UPC, FC/APC, ST/UPC, MPO

Cable Types Indoor Riser, Indoor Plenum, Indoor/Outdoor, Outdoor (Riser/Non-Rated), Outdoor Ar-

mored (Riser/Non-Rated), FieldShield®

Splice Capacity 12 splices in each Clearview Cassette

Storage Capacity One meter of 900 μm ber

Material Steel and aluminum with almond powder coating

The FieldSmart SCD Panel mounts up to two

Clearview devices: the 12 port Clearview Cas-

sette or the two port, four port or six port Clear-

view xPAK in a single rack unit. The product is

available as either a 19” or 23” (482.60 mm or

584.20 mm) rack-mount unit. The FieldSmart

SCD 1RU is intelligently designed to provide

the user with superior ber access while using

craft-friendly radius protected ber management

for routing and deploying ber jumpers.

The Small Count Delivery Panel for a rack

provides a cost-effective way to deliver ber

management protection in interconnect or

cross-connect environments when landing a

small number of bers. It provides interconnect

or cross-connect connectivity for Clearview®

Blue Cassettes and xPAKs in a 1RU footprint.

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

FieldSmart®Small Count Delivery (SCD) Panel

Installation Manual _________________________________________________________

Manual 020418 REV A - Dec 2018

Ship Along Items

In addition to the FieldSmart SCD Panel body, the following items are shipped along with the panel.

(2) Panel Mounting Brackets with Radius Fingers

(2) 23” Panel Mounting Extension Brackets

(2) Middle LGX xPAK Mounting Brackets

(2) Outside LGX xPAK Mounting Brackets

2.5ft Grommet Tape

Designation Card (Stored Inside Panel)

Cable Mounting P-Clip

10-24 x 1/2in P-Clip Screw

(8) 12-24 x 3/8in Panel Mounting Screws

(20) 6-32 x 1/4in Panel Assembly Screws

10.

FieldSmart®Small Count Delivery (SCD) Panel

__________________________________________________________ Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

Manual 020418 REV A - Dec 2018

Installing Clearview Blue Cassettes

The front of the empty FieldSmart SCD Panel is shown below.

Insert the Clearview Blue Cassette into the desired side of the panel.

Using a phillips screwdriver, secure the cassette into place by tightening the retaining screws on the mounting ears of

each side of the cassette

If installing Clearview Blue Cassettes into both sides of the panel, repeat the previous steps on the other side.

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

FieldSmart®Small Count Delivery (SCD) Panel

Installation Manual _________________________________________________________

Manual 020418 REV A - Dec 2018

Installing Clearview xPAKs

In order to install LGX style Clearview xPAKs into the FieldSmart SCD Panel, the front end of the panel must rst be

congured to accept the xPAKs.

Install the outside LGX xPAK mounting bracket onto the front face of the panel as shown. Use a philips head screw-

driver to secure the bracket into place with two of the 6-32 x 1/4in panel assembly screws.

FieldSmart®Small Count Delivery (SCD) Panel

__________________________________________________________ Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

Manual 020418 REV A - Dec 2018

Install the middle LGX xPAK mounting bracket onto the front face of the panel as shown. Use a philips head screw-

driver to secure the bracket into place with three of the 6-32 x 1/4in panel assembly screws.

Slide the Clearview xPAK into place in the panel.

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

FieldSmart®Small Count Delivery (SCD) Panel

Installation Manual _________________________________________________________

Manual 020418 REV A - Dec 2018

Utilize the push/pull plungers to secure the Clearview xPAK into the panel. Ensure the outer grommets of the push/pull

plungers are seated in the holes of the middle and outside LGX xPAK mounting brackets, and push the plunger in to

expand the grommet and lock the xPAK in place.

If you wish to install an xPAK into the other side of the panel, repeat the previous steps for the other side.

FieldSmart®Small Count Delivery (SCD) Panel

__________________________________________________________ Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

Manual 020418 REV A - Dec 2018

Panel Mounting

In order to mount the FieldSmart SCD Panel into a frame, you will rst need to install the panel mounting brackets with

radius ngers onto each side of the panel. Notice the 4 threaded holes along each side of the panel.

The panel mounting brackets can be installed so that when the panel is mounted, it is either ush, 1 inch recessed, or

3 inches recessed. This is achieved by simply shifting the mounting brackets forward.

Flush Mount

1” Recessed Mount

3” Recessed Mount

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

FieldSmart®Small Count Delivery (SCD) Panel

Installation Manual _________________________________________________________

Manual 020418 REV A - Dec 2018

Utilizing 4, 3 or 2 (depending upon mounting bracket position) of the 6-32 x 1/4in panel assembly screws per side,

secure the mounting brackets into place on both sides of the panel.

For 19 inch frames, the panel is now ready to install into the frame. However, if the panel is to be installed into a 23

inch frame, the extension brackets must rst be installed on both sides of the panel. Using two 12-24 x 3/8in panel

mounting screws per side, secure the extension brackets onto the mounting brackets as shown.

Otros manuales para FieldSmart

Tabla de contenidos

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario