Clas Ohlson PF-8DN-283V3RTC Manual de usuario
EnglishSvenskaNorskSuomi
8” Digital Photo Frame
Digital Fotoram 8″
Digital fotoramme 8”
Digitaalinen valokuvakehys 8″
Art.no Model
38-3728 PF-8DN-283V3RTC Ver. 201002
2
English
8″ Digital Photo Frame
Art. no 38-3728 Model PF-8DN-283V3RTC
Please read the entire instruction manual before using the product and save it
for future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. If you have any questions regarding
technical problems please contact Customer Services.
Contents
1. Safety
2. Product description
3. Buttons and connections
4. Getting started
5. Use
6. Settings
7. Care and maintenance
8. Troubleshooting guide
9. Disposal
10. Specifications
3
English
1. Safety
• Warning Do not open the casing! Certain components within the product’s casing
carry dangerous currents. Contact with these may give you an electric shock.
• The product should only be repaired by qualified service technicians.
• The product should not be taken apart or modified.
• Do not place the product where there is a risk of it falling into water or other liquid.
Do not place any objects containing liquid on the product, e.g. flower vases
or soft drinks.
• Do not cover the ventilation openings. Do not place the product close to heat
sources such as on top of the radiator or TV. Do not place it on the sofa, as there
is a risk that the ventilation openings will be blocked.
• Use only the included AC/DC mains adaptor. Always unplug the adaptor from the
electrical outlet if the product is not be used for an extended period.
• Do not place heavy of sharp objects onto the display screen. Do not stand on the
mains lead or pull it around any sharp corners or edges.
• The product is designed for 8 to 10 hours of continuous operation. Avoid using it
for a longer period than recommended. Allow the product to cool down for a while
before using it again.
• The product is intended for indoor use only.
• Do not expose the product to direct sunlight for prolonged periods.
• Do not use the product in damp, dusty, or dirty environments.
• Only use a lightly moistened soft cloth with a little washing up liquid to clean
the screen.
• Do not disconnect the mains adaptor while the frame is in use. The attached me-
mory storage device may be damaged. Neither should the connected memory
storage device be removed when the frame is in use.
2. Product description
• Digital photo frame with 8″ colour screen, resolution: 800 x 600, aspect ratio: 4:3.
• Displays your digital photos without the need for a computer.
• USB memory and memory card slots (SD/MMC/MS).
• Slideshow with different transition effects and adjustable display intervals.
• The slideshow can play simultaneously with musical accompaniment.
• Supports MPEG-1, MPEG-2 and MPEG-4 formats.
• Supports MP3 and WMA.
• Repeat function for both music and video playback.
• Built-in speakers.
• Touch-control buttons with blue backlighting.
• Calendar
• Alarm (4 different times)
• Comes with remote control and mains adaptor.
• Adjustable automatic on/off function.
4
English
►
M<>V
V
U
◄
1
2
3
4
5 6 7 8 9 10 11 12
13 14
3. Buttons and connections
1. Adjustable table stand
2. DC power input socket for the supplied mains adaptor (5 V DC, 2 A)
(positive centre)
3. Mini-USB port
4. USB port
5. IR sensor for remote control
6. [►] – Begin display/pause display/confirm selection
7. [M] – Open menu Push and hold to show the OSD menu when displaying
photos or video.
8. [O] – Exit main menu
9. [<] Left in menu
10. [>] Right in menu
11. [^] Up in menu
12. [
v
] Down in menu
13. SD/MMC/MS – Memory card slot
14. Power switch – Turn photo frame on/off (hidden by picture)
5
English
▲
◄
◄◄ ►►
►
▼
SETUP
OK
MENU OSD
VOL+ VOL–
♫
◄
4:3
16:9 I
23
15 24
26
27
29
32
30
25
31
28
16
19
22
17
18
20
21
Remote control
15. [ ] – Turn the photo frame on/off
16. [▲] – Scroll up in the menus/Previous photo/track/video
17. [◄] – Scroll left in the menus Rotate the image 90 degrees anticlockwise
18. [MENU] – Push to open the main menu. Push and hold to show the OSD menu
when displaying photos or video.
19. [▼] – Scroll down the menus/Next photo/track/video
20. [◄◄] – Fast rewind (music/video)
21. [
♫
◄
4:3
16:9
I
] – Push to zoom in on the image
22. [4:3/16:9] – Change aspect ratio, 4:3 or 16:9
23. [VOL+] – Increase volume
24. [SETUP] – Enter/exit the settings menu
25. [OK] – Confirm/Start or Pause playback
26. [►] – Scroll right in the menus Next image (in display mode)
27. [OSD] – Enter/exit On Screen Display menu (appears at bottom of screen)
28. [
♫
◄
4:3
16:9
I
] – Return to the previous menu
29. [►►] – Fast forward (music/video)
30. [
♫
◄
4:3
16:9
I
] – Start slideshow with background music*
31. [♫] – Start/stop music playback for current slideshow
32. [VOL-] – Reduce volume
* Only if the connected memory contains music files.
6
English
CR2025
OFF
ON
SD / MMC / MS
DC USB HOST
OFF
ON
SD / MMC / MS
DC USB HOST
OFF
ON
SD / MMC / MS
DC USB HOST
OFF
ON
SD / MMC / MS
DC
OFF
ON
SD / MMC / MS
DC USB HOST
OFF
ON
SD / MMC / MS
DC USB HOST
OFF
ON
SD / MMC / MS
DC USB HOST
OFF
ON
SD / MMC / MS
DC
4. Getting started
4.1 Inserting the battery into the remote control
The remote control operates on one CR2025 (3 V) battery.
• Insert the battery as shown in the
figures while referring to the polarity
marking (+) on the battery holder.
Remove any protective plastic film
from the battery before use.
• The battery normally lasts for up to
a year, but this is dependant on how
much the remote control is used.
• Change the battery when the remote does not work despite being held close to
the digital photo frame’s sensor.
4.2 Assembling the table stand
The photo frame can be hung on a wall or used with the supplied table stand (1).
There are holes on the back of the frame for wall mounting.
Attaching the table stand:
1. Carefully slot the lugs on the stand into the slots in the back of the frame.
Press gently whilst simultaneously rotating the stand 45˚.
2. Turn the table stand to the desired position. The table stand can be rotated 90˚
for positioning the frame in either portrait or landscape orientation.
7
English
2
14
OFF
ON
SD / MMC / MS
DC USB HOST
OFF
ON
SD / MMC / MS
DC USB HOST
OFF
ON
SD / MMC / MS
DC USB HOST
OFF
ON
SD / MMC / MS
DC
OFF
ON
SD / MMC / MS
DC USB HOST
OFF
ON
SD / MMC / MS
DC USB HOST
OFF
ON
SD / MMC / MS
DC USB HOST
OFF
ON
SD / MMC / MS
DC
4.3 Connecting the mains adaptor
1. Plug the included adaptor
into a wall socket.
2. Then plug the adaptor’s DC
connector into the socket
on the photo frame marked
“DC” (2).
3. Set the power switch on
the back of the photo frame
to the position ON to turn
on the device.
N.B.
• The [POWER] (15) button on the remote control is usually used to turn the photo
frame on or activate standby mode. To completely turn the frame off, the power
switch (14) on the back of the frame must be set to the OFF position.
• Always unplug the adaptor from the electrical outlet if the product is not be used
for an extended period.
4.4. Connecting a memory card or USB memory stick
N.B. Only use one memory card at a time (except when copying).
Memory card
The following memory cards are compatible:
• Secure Digital (SD)
• Multimedia Card (MMC)
• Memory Stick (MS)
If your digital camera uses any of the above
mentioned memory cards you can connect
the camera’s memory card directly to the
photo frame.
1. Insert the memory card into the appropriate slot – “SD/MMC/MS” (13). Do not use
any force while inserting the memory card.
2. Remove the card by pulling it straight out. N.B. Do not remove a memory card
whilst data transfer is in progress.
USB memory stick
The “USB HOST” slot (4) can be used for connecting USB devices such as
USB memory sticks or MP3 players.
8
English
5. Use
5.1 Copying files from a computer
You can connect the photo frame to a computer in order to copy computer files onto
a memory device connected to the frame such as a memory card/USB memory.
N.B.
• Compatible with Windows 2000, XP and Vista.
• When the frame is connected to a computer (via a mini-USB lead) the “USB
HOST” slot (4) is not available for use.
• Do not disconnect the photo frame from the computer during file transfer.
1. Start both the computer and frame.
2. Make sure that the USB memory is connected to the frame before connecting
the frame to the computer.
3. Connect the mini-USB lead to the frame’s Mini-USB slot (3) and the other end
to the computer.
4. The computer will detect “New Hardware” and begin installing the software
automatically. Wait until the computer completes the installation.
5. In “My Computer” you will notice several icons marked “Removable Disk”.
6. “Drag and drop” the files on the computer to the frame’s memory device.
7. When it is time to disconnect the frame from the computer, first double click on the
Safely Remove Hardware icon. Then highlight USB Mass Storage Device and
click on Stop. Finish by clicking OK. Now you can safely remove the USB device
from the computer.
5.2 Viewing photos
1. When a memory device is inserted into the photo frame, the corresponding icon
appears on the main menu.
2. Navigate the main menu using [▲] (16) and [▼] (19) or [^] (11) and [
v
] (12).
3. Return to the previous menu using [O] (8).
5.3 Main menu
1. Press [MENU] (18) or [M] (7) to display the main menu.
SD/
MMC/MS
Appears when you insert
a memory card.
USB Appears when you insert
a USB memory stick.
Clock Displays the time and
alarm setting The clock
is set using “Setup”.
Calendar Displays the calendar
and alarm setting.
Setup Settings mode.
9
English
2. Navigate the menus using [▲] (16) and [▼] (19) or [^] (11) and [
v
] (12).
Photo Start a slideshow or view
images from the memo-
ry source manually.
Music Start playing MP3
music.
Video Start playing video
Files Browse all files on me-
mory card/USB memory,
copy or delete files
3. In “Photo mode”, the photos on the selected memory source can be displayed as
thumbnails. Up to 15 photos can be displayed at a time.
a. Select a memory source from the
main menu, and press [►] (26),
the mode menu appears.
b. The photos in the memory are
displayed on the screen as
thumbnails.
c. Select the desired photo to view
using [◄] (17) [►] (26) [▲] (16) or
[▼] (19). Press [OK] (25) to start
a slideshow with the displayed
image or to start a slideshow
from the beginning with back-
ground music (if the memory
contains music files).
5.4 Viewing a single photo
1. Connect a USB memory or a memory card containing JPG/JPEG image files.
2. Select Photo and confirm by pressing [OK] (25).
3. In the main menu, highlight the memory card and press [OK] (25).
4. The photos in the memory are displayed in thumbnail view:
5. Select the desired photo to view using [◄] (17) [►] (26) [▲] (16) or [▼] (19. Press
[OK] (25) to start a slideshow with the displayed image or to start a slideshow from
the beginning with background music (if the memory contains music files).
10
English
5.5 Watching a slideshow
The photo frame displays all JPEG images stored on the connected memory device in
slideshow format. If the memory also contains music files these are played simultan-
eously with the slideshow.
1. Connect a USB memory or a memory card containing JPG/JPEG image files.
2. In the main menu, highlight the memory card and press [OK] (25).
3. Use [◄] (17) and [►] (26) to select the memory source you wish to display the
pictures from and then press to start the slideshow.
4. The photo frame automatically locates the files on the connected memory and
starts the slideshow.
5. Slideshow controls:
Photo frame buttons
►Starts the slideshow from the current photo, press [►] again to pause
the slideshow and only display the current photo. Press [►] once more to
resume the slideshow.
OStop the slideshow and display the photos as thumbnails.
MPush and hold to show the OSD menu when displaying photos or video.
Remote control buttons
♫
◄
4:3
16:9
I
Start slideshow with background music, music files in the memory start
automatically*.
OK Start slideshow, press [OK] again to pause the slideshow and only display
the current photo, press once to start the slideshow again. When the
slideshow is paused, the II icon appears in the corner of the display.
OStop the slideshow and display the photos as thumbnails.
MENU Open menu.
* Only if the connected memory contains music files.
Using the OSD menu (On Screen Display) to view photos
• Whilst viewing a photo or slideshow: Press [OSD] (27) or [M] (7) to display the OSD
menu at the bottom of the screen.
• The OSD menu shows the controls that can be used for viewing the photo plus
any information about the photo.
• Select a function using [<] (9) or [>] (10), confirm by pressing [►] (6). The displayed
symbols are from the left:
Tabla de contenidos
Idiomas:
Otros manuales de Marco de fotos digital de Clas Ohlson
Clas Ohlson
Clas Ohlson D3721 Manual de usuario
Clas Ohlson
Clas Ohlson KD0706-S08-UK Manual de usuario
Clas Ohlson
Clas Ohlson PF-7AW-103-UK Manual de usuario
Clas Ohlson
Clas Ohlson PF283A2 Manual de usuario
Clas Ohlson
Clas Ohlson PF-10DN-502V3RC Manual de usuario
Clas Ohlson
Clas Ohlson DPF-108P Manual de usuario
Clas Ohlson
Clas Ohlson 38-5196 Manual de usuario
Clas Ohlson
Clas Ohlson KD0807-B01 Manual de usuario
Clas Ohlson
Clas Ohlson KD0805 Manual de usuario
Clas Ohlson
Clas Ohlson DP730AD-UK Manual de usuario
