Fig. E
Fig. F
Place the leg on any flat surface, (leg must always be oriented so
it looks like an ‘L’ when seen from the top).
Align three (3) M8 flat head socket screws with the left three (3)
counter-sunk holes on the leg and then, by hand, attach three (3)
threaded standos from the other side of the foot (Fig. E).
Standos should always be on the left side of the leg (Fig. F).
Repeat for remaining legs.
STEP 1
Always put standos on left row of holes.
Right row of holes should be left empty.
