Clarke CVP1000 Guía rápida

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

MODEL NO: CVP1000

PART NO:

PART NO: 6499640

Rotary Vane Pump

INTRODUCTION

Thank you for purchasing this CLARKE vane pump.

Suitable for use with water, petrol, diesel and xylol, (not suitable for use with acid, alkali and chemicals which are

corrosive to aluminium

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.

SAFETY

To ensure safe and efficient operation, it is essential to read and follow each of these warnings and precautions.

1. When used to pump flammable liquids, improper use or installation of this product can cause serious bodily injury or

death.

2. Do NOT smoke near the pump or use the pump near an open flame. Fire could result.

3. When pumping flammable liquids, all equipment must be grounded to prevent the build up of static electricity

which may ignite vapours or gases.

SPECIFICATIONS

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of

purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not

used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior

permission.

This guarantee does not effect your statutory rights.

WARNING: THIS PRODUCT SHOULD NOT BE USED FOR FLUID TRANSFER INTO AIRCRAFT. THIS PRODUCT IS NOT

SUITABLE FOR USE WITH FLUIDS FOR HUMAN CONSUMPTION.

Drum Connector Size 2" BSP

Max Flow Approx 24L/min

Inlet Tube Diameter 29 mm i/d (32mm o/d)

Outlet Tube Diameter 22 mm i/d (25mm o/d)

Dims (W x D x H) 190 x 240 x 1280 mm

Product Weight 2.6 kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

FITTING THE PUMP TO A DRUM

1. Assemble the pump using the handle, collar, spout and inlet tube supplied.

• The pump body is marked with IN for the inlet tube and with an arrow for the outlet tube.

• Use PTFE tape at all connections.

2. Fit the collar over the inlet tube before screwing the tube to the pump body.

3. Screw the collar into the threaded opening of the barrel.

4. Raise or lower the inlet tube so that it is just above the bottom of the drum when fitted. Set in position by tightening

the collar.

USING THE PUMP

1. Make sure all connections are secure and place a suitable container under the outlet tube.

2. Rotate the handle to draw fluid from the drum.

• The first time you use the pump, it may take several turns of the handle before liquid begins to flow.

COMPONENTS SUPPLIED ASSEMBLED

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Bomba de agua de Clarke

Clarke

Clarke ISP10A Manual de instalación y operación

Clarke

Clarke CSP1530 Manual de instrucciones

Clarke

Clarke CBM100SS Manual de instalación y operación

Clarke

Clarke PSP105 Manual de instrucciones

Clarke

Clarke DWP210A Manual de instrucciones

Clarke

Clarke ECP15A1 Manual de instrucciones

Clarke

Clarke psp125b Manual de instrucciones

Clarke

Clarke GSE1 Manual de instrucciones

Clarke

Clarke CSD4 Manual de instrucciones

Clarke

Clarke MSP12 Manual de usuario

Clarke

Clarke DFT12A Manual de instrucciones

Clarke

Clarke HIPPO Jr Manual de instalación y operación

Clarke

Clarke PSV5A Manual de instrucciones

Clarke

Clarke DWP100A Manual de instrucciones

Clarke

Clarke PTP100 Manual de instrucciones

Clarke

Clarke CHHDP830 Manual de instrucciones

Clarke

Clarke CSE400A Manual de instrucciones

Clarke

Clarke HSEC651A Manual de instrucciones

Clarke

Clarke CFT230 Manual

Clarke

Clarke CSV4A Manual de instrucciones

Clarke

Clarke CFTP12 Manual de instrucciones

Clarke

Clarke CDDFTP Manual de usuario

Clarke

Clarke PSP195 Manual de instrucciones

Clarke

Clarke BIP1000 Manual de instrucciones

Manuales populares de Bomba de agua de otras marcas

Neptun

Neptun NPHW 5500 Manual de usuario

Sensidyne

Sensidyne Gilian BDX-II Instrucciones de instalación y funcionamiento

Draper

Draper 47808 Manual de usuario

Trolla

Trolla 12820 Manual de usuario

Sunfab

Sunfab SVH Series Manual de usuario

WilTec

WilTec 50740 Manual de usuario

Fieldmann

Fieldmann FVC 5015 EK Manual de usuario

Everbilt

Everbilt EFSUB5-122HD Manual de usuario

Graco

Graco Husky 3300e Manual de usuario

esotec

esotec 101018 Manual de usuario

moyno

moyno 2000 CC Manual de usuario

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manual de usuario

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guía de solución de problemas

DUROMAX

DUROMAX XP WX Series Manual de usuario

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manual de usuario

Franklin Electric

Franklin Electric IPS Manual de usuario

Xylem

Xylem e-1532 Series Manual de usuario

Milton Roy

Milton Roy PRIMEROYAL Manual de usuario