Clarke CGS5D Manual de instrucciones

OPERATION & MAINTENANCE

INSTRUCTIONS

LS0519

ORIGINAL INSTRUCTIONS

GUN SAFE WITH DIGITAL LOCK

MODEL NO: CGS5D, CGS8D

PART NO: 7724029, 7724032

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Gun Safe with Digital Lock.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

CARTON CONTENTS

The following items should be supplied in the carton. If any parts are missing or

damaged, please see your Clarke dealer.

1 x Gun Safe

2 x Gun Safe Override Keys

2 x Ammunition Safe Keys

2 x Expansion Bolts

4 x AA Batteries

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PART IDENTIFICATION

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INSTALLATION

Remove everything from the box and dispose of any packaging materials in

an environmentally friendly way.

FIXING THE GUN SAFE IN POSITION

1. Your gun safe must be securely fixed to the structure of the building.

• Ideally it must be in a room or space that does not have direct

access to the outside of the building.

• It must not be in a garage, shed or other outbuilding.

• When considering the larger or heavier gun safes, you should

consider the load bearing strength of your floors.

• Wherever possible, it should be fixed to either a wall that is built from

bricks or concrete blocks or to the floor. If this is not possible then to a

strong joist using suitable fixings.

• The gun safe must be out of sight. If it is in a corner, it is more difficult

for a thief to attack it.

• You should avoid fixing the gun safe near any heat source.

2. The gun safe must be secured using suitable fixings.

• There are two fixing holes on the rear and four on the bottom.

3. Fit the gun safe flush to the wall.

• If needed remove the skirting boards behind/to the side of the gun

safe as they may leave a large enough gaps for a crowbar to be

used to prise the gun safe away.

NOTE: IF YOU HAVE ANY QUERIES CONTACT YOUR LOCAL FIREARMS

LICENCING TEAM.

KEYS

1. Remember it is YOUR responsibility to ensure that unauthorised persons can

not gain access to your guns.

• Do not let anyone (including family members) know the

combination or where the override keys are kept. You may lose your

shotgun/firearm certificate if you do.

2. Keep the keys to the gun safe in a place where they can’t be found easily.

• “hiding” keys in a drawer is pretty obvious to a thief, so think carefully

about the hiding place. Consider purchasing a small combination

safe where only you know the combination.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

BEFORE USE

OPENING THE SAFE FOR THE FIRST TIME

1. Remove the override key cover

from the front panel.

2. Insert the override key, turn it

clockwise as far as possible and

hold it in position.

3. At the same time, turn the keypad

lock anticlockwise as far as

possible and hold it in this position.

4. Release the override key

5. Push the main handle down and

pull the door towards you to open

the safe.

IMPORTANT: Never keep the override

keys inside the safe itself.

6. Remove the key and replace the

override key cover onto the front

panel.

INSTALLING THE BATTERIES

The safe requires 4 x size “AA” (1.5V) batteries.

1. Open the safe.

2. Remove the battery cover plate

on the back of the door and

install the batteries.

• Ensure the batteries are fitted

with the correct polarity.

3. Use of alkaline batteries is

recommended.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PROGRAMMING THE CODE

NOTE: You have approximately 5 seconds to carry out each step before the

lock resets and you need to start again.

1. With the safe door open and the

batteries installed: Press the code

reset button (A) on the rear of the

door once.

• You will hear a beep.

• The yellow light will be

displayed on the keypad.

2. Enter the code you want to use

(3-8 digits) as a combination.

3. Press “A” or “B” to confirm your

code.

• The safe “beeps” once and the

yellow light will go off,

• Your personal code is now set.

4. Test the safe using the new

combination immediately.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

USING YOUR SAFE

TO OPEN THE SAFE

1. Enter your personal code followed

by the letter “A” or “B”.

• you will hear a beep and the

green light on the front of the

safe will light up.

2. Turn the keypad lock

anticlockwise as far as possible

and hold it in this position.

3. Push the handle down and pull

the door towards you.

• If you, or an intruder uses the

incorrect group of numbers, it

will not open, if the incorrect

combination is used 3 times,

you must wait for 18 seconds

before trying again.

• If the incorrect combination is

selected a further 3 times, you

must wait approximately 4.5 minutes before trying again.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INSERT THE GUNS

1. Remove all ammunition from the

guns and secure the ammunition

in the ammunition safe.

2. Place the guns into the gun safe

making sure they are resting

securely against the foam inserts.

THE AMMUNITION SAFE

Inside the gun safe is a small

ammunition safe.

Use the key supplied to access this

compartment.

CLOSING THE GUN SAFE

1. Close the door and lift the handle up.

2. Turn the keypad lock clockwise as far as possible to lock the safe.

BATTERY REPLACEMENT WARNING

If the batteries are low, the red light on the keypad will illuminate. Replace the

batteries immediately.

MANUAL OVERRIDE

See “Opening the safe for the first time” on page 5.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

MAINTENANCE AND SERVICING

There are no user serviceable parts in this gun safe. Any repairs must be carried

out by Clarke service (see bottom of the page for contact number)

CLEANING

Wipe the surfaces with a damp cloth. Do not use harsh cleaners as they may

damage the finish of your gun safe.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

REPLACEMENT OVERRIDE KEY

A small label is located on the door of each safe with a key number.

This number must be registered with Clarke international in the event you may

require a replacement key.

Please complete the registration form supplied and send it to the address

stated with the form.

If you fail to register the safe we will not be able to provide you with a

replacement key.

We recommend that in addition to sending the completed form you remove

the label from the safe and fix it to the space below. Please retain this

document for future reference.

Fix or record the key number here

Key Number....................................................................................

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Seguro de Clarke

Clarke

Clarke Strong-Arm CS250D Manual de usuario

Clarke

Clarke Strong-Arm CS500F Manual de usuario

Clarke

Clarke STRONG-ARM CS1058 Manual de usuario

Clarke

Clarke CS800K Manual de instrucciones

Clarke

Clarke STRONG-ARM CS800D Manual de instrucciones

Clarke

Clarke Strong-Arm CS1000K Manual de instrucciones

Clarke

Clarke STRONG-ARM CS100F Manual de usuario

Clarke

Clarke STRONG-ARM CS250D Manual del propietario

Clarke

Clarke CS400FP Guía de solución de problemas

Clarke

Clarke CS600D Manual de instrucciones

Clarke

Clarke CS400D Manual de instrucciones

Clarke

Clarke STRONG ARM CS 1055 Manual de usuario

Clarke

Clarke CS300K Manual de instrucciones

Clarke

Clarke STRONG-ARM CS500F Manual del propietario

Clarke

Clarke STRONG-ARM CS1000D Manual de instrucciones

Clarke

Clarke STRONG-ARM CS300K Manual de instrucciones

Clarke

Clarke CS150F Manual de instrucciones

Clarke

Clarke Strong-Arm CS300D Manual de instrucciones

Clarke

Clarke CFPSM Manual de instrucciones

Clarke

Clarke CS200K Manual de usuario

Manuales populares de Seguro de otras marcas

Squire

Squire Stronghold Keysafe Manual de usuario

Phoenix

Phoenix FS0352C Hoja de información del producto

Phoenix

Phoenix KS0030E Series Manual de usuario

Vaultek

Vaultek 10 Series Hoja de especificaciones

Arregui

Arregui CLASS Manual de usuario

Beaumont

Beaumont SMART KEYBOX Manual de usuario

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manual de usuario

Hornady

Hornady SnapSafe Trunk Safe II Manual de usuario

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manual de usuario

Honeywell

Honeywell 5912 Manual de usuario

Phoenix

Phoenix FS1280F Manual de usuario

Phoenix

Phoenix SS0992K Hoja de información del producto

Technomax

Technomax Trony Series Manual

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manual de usuario

RICHTER CZECH

RICHTER CZECH LA Manual de operación

Olymp

Olymp GOsafe 110 Manual de usuario

Phoenix

Phoenix SS0100E Hoja de información del producto

Ankaro

Ankaro ANK EZ I Manual de usuario