Clarke Air CAT107 Manual de instrucciones

1/2” REVERSIBLE DRILL

MODEL No: CAT107

Part No: 3110863

OPERATION & MAINTENANCE

INSTRUCTIONS

1007

SPECIFICATIONS

Min. Hose Size (ID) ....................................1/4” BSP

Ave. Air Consumption..............................4 cfm

Air Pressure Max .......................................6.2 bar (90psi)

Maximum Chuck Size ..............................1/2’’ (13mm)

Maximum Speed ......................................800 rpm

Weight .......................................................2 kg

Vibration....................................................< 2.5 m/s2

Dimensions LxWxH ....................................235 x 43 x 170 mm

Part No.......................................................3110863

Please note that the details and specifications contained herein, are correct at the time of

going to print. However CLARKE International reserve the right to change specifications at

any time without prior notice. Always consult the machine’s data plate

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 12 months

from the date of purchase. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in

any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned

to us without prior permission.

This guarantee does not effect your statutory rights.

IN THE BOX

1 x Reversible Air Drill

1 x Chuck Key

1 x Secondary Handle

1 x 3 mm Hex Key

1 x (25 mm x 5 mm) Hex Screw

We declare that these products comply to the following standards/directives

• 98/37/EC

Model No: CAT107

Serial or Batch number: See product data plate

signature:

D. Kemp

ENGINEERING MANAGER

DECLARATION OF CONFORMITY

SAFETY PRECAUTIONS

IMPORTANT

FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN PERSONAL INJURY,

AND/OR DAMAGE TO PROPERTY.

WORK ENVIRONMENT

• Keep the work area clean and tidy.

• Dress appropriately - Do not wear loose clothing or jewellery. Tie long hair out of

the way.

• Keep children and visitors away - Do not let children handle the air drill. Make sure

that any other persons in the work area are dressed suitably and are wearing eye

and ear protectors.

• Do not operate the air drill where there are flammable liquids or gases.

• Keep the air supply hose away from heat, oil and sharp edges.

• Do not fit the air drill to any stand or clamping device that may damage the tool.

USE

• Stay alert and use common sense - Do not operate the air drill when you are tired

or under the influence of alcohol, drugs or medication.

• Always wear eye protectors when using the air drill - Eye protectors must provide

protection from flying particles from the front and the side.

• Always wear ear protectors when using the air drill.

• Do not overreach - Keep proper footing and balance at all times.

• Never use any type of bottled gas as a source of power for the air drill.

• Do not connect the air supply hose with your finger on the trigger of the air drill.

• Do not exceed the maximum pressure for the air drill: 90 psi / 6.2 bar.

• Check hoses for leaks or worn condition before use, and ensure that all

connections are secure.

• Check for the presence of live electric cables before use.

• Do not use the air drill for any other purpose than that described in this book.

• Do not carry out any alterations or modifications to the air drill.

SAFETY PRECAUTIONS

• Always disconnect from the air supply when:

a) Performing any maintenance

b) The air drill is not in use.

c) The air drill will be left unattended.

d) Moving to another work area.

e) Passing the air drill to another person.

• Never use the air drill if it is defective or operating abnormally.

• The air drill should be serviced at regular intervals by qualified service personnel.

• Avoid damaging the air drill for example by applying excessive force of any kind.

• ALWAYS maintain the tool with care. Keep it clean for best and safest

performance.

• Quick change couplings should not be located at the tool. They add weight and

could fail due to vibration.

• DO NOT force or misuse the tool. It will do a better and safer job at the rate for

which it was designed.

• DO NOT remove any labels. Damaged labels should be replaced.

• This tool vibrates with use. Vibration may be harmful to your hands or arms. Stop

using the tool if discomfort, a tingling feeling or pain occurs. Seek medical advice

before resuming use.

TRANSPORTATION

• Never carry the air drill by the air supply hose.

• Never carry the air drill with your finger on the trigger.

STORAGE

• When not in use the air drill must be disconnected from the air supply and stored

in a dry place out of the reach of children (preferably in a locked cabinet).

• Avoid storing the air drill in environments where the temperature is below 0oC.

PARTS

Trigger

Secondary

Handle

Direction Selector

Chuck

AIR SUPPLY

WARNING!

COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU ARE THOROUGHLY

FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF COMPRESSORS AND

COMPRESSED AIR SUPPLY.

• Use only clean, dry, regulated compressed air as a power source for the air drill.

• Air compressors used with the air drill must comply with the appropriate European

Community safety directives.

• A build up of moisture or oil in the air compressor will accelerate wear and

corrosion in the air drill.

• Never exceed the maximum operating pressure for the air drill.

AIR HOSE

• The air hose must be rated at least 150% of the maximum operating pressure of

the tool.

Air Inlet

RECOMMENDED AIR SUPPLY CONNECTION

Loosen

Tighten

ASSEMBLY

Connect a suitable hose to the Drill using a ¼”

hose adapter, (A whip hose with Quick Fit

coupling is available from your CLARKE

dealer).then connect the other end to the

airline.

NOTE:

ensure the airline is turned off.

Your Drill is now ready for use.

WARNING

COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU ARE THOROUGHLY

FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF COMPRESSORS AND

COMPRESSED AIR SUPPLY.

FITTING THE SECONDARY HANDLE

• The secondary handle is adjustable to suit the user and the position of the

workpiece.

• Right handed users should fit the handle on the left hand side of the drill.

• Left handed users should fit the handle on the right hand side of the drill.

To fit the handle, proceed as follows.

1 Position the handle over the drill

collar.

2 Tighten it by turning the handle in

a clockwise direction.

3 To release the secondary handle,

turn it in an anti-clockwise

direction.

4 To rotate the secondary handle,

loosen the handle. Move the

handle to the desired position and

then retighten the handle.

OPERATING INSTRUCTIONS

INSERTING THE DRILL BIT

To insert a drill bit, proceed as follows.

1 Open the chuck jaws by inserting the chuck

key in one of the holes in the chuck and

turning it as shown.

2 Make sure that the head of the chuck key is

located on the cog barrel of the chuck.

3 Turn the chuck key until the chuck jaws are

open sufficiently to take the drill bit.

4 Place the drill bit in the jaws of the chuck as

far as it will go.

5 Close the chuck jaws and tighten to grip the

drill bit by turning the chuck key as shown.

6 Make sure that the chuck jaws are fully closed

and that the drill bit is firmly held.

To remove the bit, proceed as follows.

1 Open the jaws by inserting the chuck key in

one of the holes and turning it as shown.

2 Remove the drill bit.

WARNING: REMOVE THE CHUCK KEY BEFORE OPERATING THE DRILL.

Drill bit

Cog

barrel

Chuck

jaws Close

jaws

Open

jaws

Chuck

key

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Perforar de Clarke

Clarke

Clarke X-Pro CAT207 Manual de instalación y operación

Clarke

Clarke CRD1250 Manual de usuario

Clarke

Clarke CAT116 Manual de instrucciones

Clarke

Clarke Metalworker CMD10 Manual

Clarke

Clarke CBM1-B Manual de instalación y operación

Clarke

Clarke CONTRACTOR CHD1050 Manual de usuario

Clarke

Clarke CMD300 Manual de instrucciones

Clarke

Clarke CONRHD720 Manual de instrucciones

Clarke

Clarke Metalworker CMD1225C Manual de instalación y operación

Clarke

Clarke CDS1 Manual de usuario

Clarke

Clarke CAT60 Manual de instalación y operación

Clarke

Clarke SCD28 Manual de usuario

Clarke

Clarke CDS2 Manual

Clarke

Clarke CON18LI Manual de instrucciones

Clarke

Clarke CONTRACTOR CON400RHD Manual de instrucciones

Clarke

Clarke CHD850B Manual de instrucciones

Clarke

Clarke air CAT137 Manual de instalación y operación

Clarke

Clarke CONTRACTOR CON1200RD Manual de instrucciones

Clarke

Clarke CMD300 Manual

Clarke

Clarke RAD1 Manual de usuario

Clarke

Clarke CAT137 Manual de instalación y operación

Clarke

Clarke Air CAT214 Manual de instalación y operación

Clarke

Clarke CAT123 Manual de instrucciones

Clarke

Clarke CON1500RHD Manual de instrucciones

Manuales populares de Perforar de otras marcas

Makita

Makita BDF456 Manual de usuario

Black & Decker

Black & Decker LDX220 Manual de usuario

Hitachi

Hitachi DH 40MA Manual de usuario

Challenge

Challenge JO Manual de referencia técnica

Makita

Makita LXFD01 Manual de usuario

Festool

Festool T18+3 Manual de usuario

Milwaukee

Milwaukee M12 FPDX-202X Manual de usuario

EINHELL

EINHELL TE-RH 32 E Manual de usuario

Makita

Makita DHP484 Manual de usuario

Makita

Makita FD05 Manual de usuario

Bosch

Bosch PSB 530 RA Manual de usuario

Maximum

Maximum 054-1359-4 Manual de usuario

Makita

Makita HP332D Manual de usuario

Raider

Raider RDP-HD31H Manual de usuario

Bort

Bort BPM-1400x2 Manual de usuario

Black & Decker

Black & Decker 7266 Manual de usuario

KENT USA

KENT USA TRD1230 Manual de usuario

Bosch

Bosch GSB 19-2 RE Manual de usuario