Clarion ProAudio ARX7570z Manual de usuario

Clarion

·,·.·s.'.·

•.

.•.

s·'

:.,

'.'.~

'~.',

_T""'lliil:IaDgp.DD.;g"".";,;"'::"'~.::"

,C",

fftl~--aOOallll!l

"-'-

tifilIi

,c:a

"~~~tl.

~~.I'J1-'IIIIII!!~.=~

~··e.,o-

"'·3·.'O.".".~

AM/FM

CASSETTE

PLAYER

WITH

CD/MD

CHANGER

CONTROL

•

LECTEUR

CASSETTE

AM/FM

AVEC

COMMANDE

CHANGEUR

CD/MD

•

RADIO

AM/FM

REPRODUCTOR

CASETES

CON

CONTROL

CAMBIADOR

DISCOS

COMAPCTOS/MINIDISCOS

Thank you

f~urchasing

the

Clarion

ARX7570z.

*Please read this owner's manual

its entirety before operating this equipment.

*After reading this manual, be sure to keep it

ahandy place (e.g., glove compartment).

*Check the contents of the enclosed warranty card and keep it carefully with this manual.

*This manual includes the operating procedures of the CD changer, MD changer and TV tuner con-

nected via the CeNET cable. The CD changer, MD changer and TV tuner have their own manuals,

but no explanations for operating them are described.

Contents

1. FEATURES 3

PRECAUTIONS 3

Handling Cassette Tapes 4

Flip Down Panel 4

CONTROLS 5

NOMENCLATURE 6

Names of Buttons 6

Display Items 6

DCP 7

REMOTE CONTROL 8

Inserting the Batteries 8

Functions of Remote Control Unit Buttons 9

OPERATIONS 10

Basic Operations 10

Radio Operations 12

Tape

Operations 14

Other Handy Functions 16

OPERATIONS OF ACCESSORIES 18

CD Changer Operations 18

MD Changer Operations 20

TV Operations

TROUBLESHOOTING 23

10. ERROR DiSPLAyS 24

11. SPECIFICATIONS 25

ARX7570z

1. FEATURES

•Rotary Encoder Volume Control with Illuminated Search

Key

•Touch-n-Go Flip Down Detachable Face

•Controller for Optional TV Tuner Module

•Capability to Read CD TEXT Data from Clarion Compatible CD Changer

•Z-Enhancer with 3Adjustment Modes

•CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling

•

mRIiI:rUNE~®

Reception System

•Full Logic

Tape

Transport with True Function /Auto Reverse with Dual Azimuth Adjust

•Dolby®BNoise Reduction

•4-Channel RCA Line Level Output with Fader Control

•2-Channel Non-Fade RCA Line Level Output

•160W (40Wx4) Maximum Power Output

2. RREmAUTIDNS

This unit uses aprecision mechanism. Even

the event that trouble arises, never open the case,

disassemble the unit, or lubricate the rotating parts.

This equipment generates, uses, and can radi-

ate radio frequency energy and, if not installed

and

used

accordance with the instructions,

may cause harmful interference to radio com-

munications. However, there is no guarantee

that interference will not occur

aparticular

installation.

this equipment does cause harmful interfer-

ence to radio ortelevision reception, which can

determined

turning the equipment off and

on,

the user

encouraged to consult the dealer

experienced radio/TV technician for help.

CHANGES OR MODIFICATIONS NOT EX-

PRESSLY APPROVED BY THE MANUFAC-

TURER FOR COMPLIANCE COULD VOID

THE USER'S AUTHORITY

OPERATETHE

EQUIPMENT.

CHANGES

OR MODIFICATIONS TO THIS

PRODUCT NOT APPROVED

THE MANU-

FACTURER

WILL

VOID

THE

WARRANTY

AND WILL VIOLATE FCC APPROVAL.

ARX7570z

Handling Cassette Tapes

Using any of the following types of cassette

tapes can cause malfunctions.

•Cassette tapes with low recording levels

•Cassette tapes

which the unrecorded sec-

tion between tracks

shorter than 4seconds

•Cassette tapes with noise or the like recorded

between tracks

•Cassette tapes

which there are long unre-

corded sections

the middle of atrack

Handling

precautions

•Slack

the tape can cause malfunctions.

particular for prerecorded cassette tapes and

gO-minute tapes, take up any slack

the tape

before inserting it into the cassette player.

Flip Down Panel

•Avoid

using

cassettes

120

minutes

longer. (Such cassettes have extremely thin

tape, so the tape can become stretched or

cut.)

•Periodically

playa

cleaning cassette

the

player to clean the head.

•Keep magnet items like magnets, and iron and

steel items like screwdrivers away from both

cassette tapes and the tape head

the player.

•Do not oil the cassette mechanism.

•Do not use any cassette tapes with peeling

labels or deformed cases. Such cassette tapes

can cause breakdowns.

•When not using the player, always take the

cassette out of the mechanism. Exposing a

cassette to direct sunlight, extreme tempera-

tures or high humidity can damage the cas-

sette.

Always use the

ARX7570z

with the FLIP

DOWN PANEL closed.

When

opening

and

closing

the

FLIP DOWN

PANEL, be

careful

not

catch

your

fingers.

They

could

injured.

The ARX7570z uses aflip-down structure that makes possible large-size displays.

Do not use the FLIPDOWN

PAN

EL as atray

to place objects on when it

open.

When closing the FLIP DOWN PANEL, do not

press the OPEN button

[TI.

Strong impacts to the operating or display

section can cause damage or deformation.

If the FLIP DOWN PANEL does not open fully,

gently open it with your hand.

not force operations or use this device ab-

normally when opening or closing the FLIP

DOWN PANEL.

sure

unfold

and

read

the

page.

VeuifJez depUer

vous

rMerer

page

suivante,

Cerciorese

desplegar

yde

leer

pagina

siguiente.

ARX7570z 4

Source

unit

Appareil

/Unidad fuente

With

the FLIP DOWN PANEL opened/Ouverture

PANNEAU RABATTABLE/

Apertura del PANEL ABATIBLE

Display/

Afficheur

/Visualizador

Note: Be sure to unfold this page

and

refer

the front diagrams as you read each chapter.

Remarque:

Veuillez deplier cette page

vous

referer

FlUX

quand

chdpitre.

Nota: Cuando lea los caprtulos, despliegue esta pagina yconsulte los diagramas.

5ARX7570z

NOMENCLATURE

Note:

•Be sure

read this chapterreferring

the front diagrams

chapter

"3.

CONTROLS"on page 5(unfold).

Names

Buttons

wOPEN button

Z-EHCR (z-enhancer) button

~ENT (enter) button

[ID

Preset buttons

Play/pause button Direct buttons

(7 to 12)

POWER button

[1Q]

DISP (display) button

FNC (function) button [jJ ISR (instant station recall) button

[!] TITLE button

[j1J

BND (band) button

ADJ (adjust) button PROG (program) button

[ID

PSIAS (preset scan/auto store) button

[j]

A-M (audio mode) button

SCN (scan) button LOUD (loudness) button

[ID

RPT (repeat) button

[H]

SEARCH button

BLS (blank skip) button

Rotary knob

[l]

DOLBY NR button [j]] Cassette tape insertion slot

RDM (random) button

[IT]

Eject button

Display Items

DCassette tape

indication

fJ BLS (blank skip) indication

Z-EHCR (z-enhancer) indication

Preset channel indication

Disc number indication

to 12)

:(.

The

disc numbers corresponding

the

discs

the

changer light.

MANU (manual) indication

ST (stereo) indication

Function mode indication

The

names

modes being selected,

etc.

are

displayed.

(loudness) indication

mA-M (audio mode) indication

ARX7570z

II!] CD/MD changer mode indication

mLong title indication

When

the

texts for

are more

than

characters, this indication lights.

If)

Operation status indication

The

frequency, play time, clock, etc. are dis-

played.

iii

RDM (random) indication

III RPT (repeat) indication

SCN (scan) indication

DISC indication

Dolby BNR indication

•••••

~ ~

The control panel can be detached to prevent theft. When detaching the control panel, store it

the

DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.

recommend taking the DCP with you when leaving the car.

Removing the DCP

Hold down POWER button [I] for 1second or

longer to turn off the power.

Deeply push in OPEN button

IT]

to unlock the

FLIP DOWN PANEL.

';'

the FLIP

DOWN

PANEL

does not open

fully,

gently open

with your hand.

Pull the DCP toward you and remove it.

Close the HOLD FLAP.

sure to close the HOLD FLAP for safety

when removing the

DCP.

Attaching the DCP

Insertthe right side of the DCP into the source

unit.

Insert the left side of the DCP into the source

unit.

•The DCP can easily be damaged

shocks.

After removing it, be careful not to drop it

or subject it to strong shocks.

•If the FLIP DOWN PANEL

kept open, the

DCP may drop due to vibration of the car.

This results

damage to the

DCP.

So close

the FLIP DOWN PANEL or remove the DCP

to store into the case.

•The connector connecting the source unit

and the DCP

an extremely important part.

Be careful not to damage it by pressing

it with fingernails, screwdrivers, etc.

Note:

•

the

DCP

is dirty, wipe

off

the dirt with asoft,

dry

cloth only.

ARX7570z

Operating range: 30'

all directions

Clarion

Signal transmitter

~C;J

0'--0-">

~..:-\

;--,

--1~

...

BAND

6]0

OOJ

~U~:~"'SR

~:~:

[§f---:--::.....8 8G

, I

seN

RPT

ROM

~289f---';"'-';'-E!Jr

".,".

",.

oo"~":"

Remote control unit

Inserting the Batteries

Turn the remote control unit over, then slide

the rear cover

the direction of the arrow.

Insert the AA (UM-3/1.5V)

batteries

that

came with the remote control unit facing

the directions shown

the figure, then close

the rear cover.

Notes:

Using batteries improperly can cause them to ex-

plode.

Take

note

the following points:

•When replacing batteries, replace both batteries

with new ones.

•

not short-circuit, disassemble orheat batteries.

•Do not dispose

batteries into fire

water.

•Dispose

spent batteries properly

------=-----

(UM-3/1 .5V)

'f(i!

Batteries

W@l':d

~·t

:/~"~::

Rear side (

ARX7570z

Functions

Remote Control Unit Buttons

[gQ]

FUNC Turns power

and

off.

When pressed and held for 1second: Turns power

off.

Switches among radio, tape, CD changer, MD changer and

TV.

Switches reception Switches the side of Moves the next disc Switches reception

band. the tape.

increasing order. band.

Increases and decreases volume (in

all

modes).

[g!]

BAND

DISC UP

PROG

TOP

VOLUME

SEARCH Moves preset

channels

and

down.

Fast-forward and

rewinds tape.

APC fast-forward

and rewind.

Moves tracks

and down.

When pressed and

held for 1second:

Fast-forward/

fast-backward.

Moves preset

channels

and

down.

PLAY/PAUSE No function. Switches between Switches between No function.

playback and pause. playback and pause.

~MUTE

ISR

[ll] DISP

Turns mute

and

off.

Recalls ISR radio station

memory.

Press and hold for 2seconds or longer: Stores current station into ISR memory (radio

mode only).

Switches among main display, sub display and clock display.

SCN

PS/AS

RPT

BLS

@Q]

ROM

DOLBY

MONI

Preset scan.

When pressed and

held for 2seconds:

Auto store.

function.

No function.

Fast-forward scan.

Repeat

play.

When pressed and

held for 1second:

Blank tape skip

function turns

and off.

Select Dolby Noise

Reduction mode.

Scan

play.

When pressed and

held for 2seconds:

Disc scan

play.

Repeat

play.

When pressed and

held for 2seconds:

Disc repeat

play.

Random

play.

When pressed and

held for 2seconds:

Disc random

play.

Preset scan.

When pressed and

held for 2seconds:

Auto store.

function.

Switches between

TV and VTR.

:::

Some of the corresponding buttons on the source unit and remote control unit have different functions.

ARX7570z

Basic

Operations

Note:

sure to

read

this chapter referring to the front diagrams

chapter

"3.

CONTROLS"

page

5(unfold).

sure

lower

the

volume

before

switch-

ing

off

the

unit

power

the

ignition

key.

The

unit

remembers

its

last

volume

setting.

you

switch

the

power

off

with

the

volume

up,

when

you

switch

the

power

back

on,

the

sudden

loud

volume

may

hurt

your

hearing

and

dam-

age

the

unit.

The

clock

displayed

when

the

ignition

key

turned

the

ACC

(accessory)

IGN

(igni-

tion-on)

position

even

when

the

unit

power

off. In

some

cars,

the

clock

may

momen-

tarily

disappear

when

the

ignition

key

turned

the

START

position.

The

clock

will

reappear

after

the

engine

has

started

and

the

ignition

key

released

the

IGN

(ignition-

on)

position.

Radio mode

Tape mode

changer

mode

MD changer mode

TV mode

Radio mode

...

:::

External equipment not connected with

CeNET

is not displayed.

Adjusting

the

volume

Turning the Rotary knob

[j]J

clockwise increases

the

volume;

turning

counterclockwise

de-

creases the volume.

The

volume level is from 0(minimum) to 33 (maxi-

mum).

Switching

the

display

Press DISP button

[IQ]

to select the desired display.

Each time you press DISP button

[IQ],

the display

switches

the following order:

Main display

Clock display

Sub (title) display

1·

I:"

•

ST •

t-~I:I-

TITLE

Main display

...

:::

Once selected, the preferred display

becomes

the display default. When afunction adjustment

such as volume is made, the screen will mo-

mentarily switch to that function's display, then

revert

back

to the preferred

display

several

seconds after the adjustment.

:::

When you have entered atitle in aCD, it ap-

pears in the sub display. If you have not en-

tered atitle,

"NO-TTL"

appears in the title dis-

play instead. For information on how to

enter

title, refer to the subsection

"Entering

titles"

in the

"Other

Handy

Functions".

Turning

on/off

the

power

Note:

•Be careful

about

using this unit foralong time with-

out running the engine.

you drain the car's bat-

tery too

far,

you

may

not

be able to

start

the en-

gine

and

this can reduce the service life

the

battery

Press POWER button

[1].

The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

Press and hold POWER button

[1]

for 1sec-

ond or longerto turn off the power for the unit.

Note:

•System check

The first time this unit is turned on

after

the wire

connections are completed, it

must

checked

what equipment is connected. When the

power

turned on, "SYSTEM

CHCK"

appears in the dis-

play,

press

POWER

button [J]. The

system

check

starts

within the unit. When the

system

check is complete, the

power

is turned off, sopress

POWER button [J] again.

Selecting

mode

Press FNC button

[1]

to change the mode of

operation.

Each time you press FNC button

[1],

the mode

of operation changes

the following order:

ARX7570z

Otros manuales para ProAudio ARX7570z

Tabla de contenidos

Otros manuales de Sistema estéreo para automóvil de Clarion

Clarion

Clarion iDXZ378RMP Manual de usuario

Clarion

Clarion DXZ776usb Manual de instrucciones

Clarion

Clarion CX609E Manual de usuario

Clarion

Clarion DXZ838RMP Guía de inicio rápido

Clarion

Clarion ProAudio ARX7570z Manual de usuario

Clarion

Clarion CZ309 Manual de usuario

Clarion

Clarion VS735 Manual de usuario

Clarion

Clarion DXZ735MP Manual de usuario

Clarion

Clarion VRX848RVD Manual de usuario

Clarion

Clarion NX501 Manual de usuario

Clarion

Clarion DB328RB Manual de usuario

Clarion

Clarion rdx665dz Manual de usuario

Clarion

Clarion CX501E Manual de usuario

Clarion

Clarion DB625MP Manual de usuario

Clarion

Clarion DXZ858RMP Instrucciones de montaje

Clarion

Clarion MAX685BT Manual de reparación

Clarion

Clarion MAX385VD Guía de inicio rápido

Clarion

Clarion CZZ09 Manual de usuario

Clarion

Clarion VRX785BT Manual de reparación

Clarion

Clarion DB225 DB225 DB225 Manual de usuario

Clarion

Clarion PS-2375D Manual de usuario

Clarion

Clarion PN-3124N-A Manual de usuario

Clarion

Clarion BTD3341 Manual de usuario

Clarion

Clarion DXZ758RMC Manual de usuario

Manuales populares de Sistema estéreo para automóvil de otras marcas

JL Audio

JL Audio Stealthbox SB-CAN-G2MVX3D/10TW3 Manual de usuario

Sony

Sony MEX-BT5750U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric AR0M Manual de usuario

Sony

Sony RM-X7BT Manual de usuario

Insignia

Insignia NS-HD5113 Manual de usuario

USA SPECS

USA SPECS PA11-VW6 Manual de usuario

Sony

Sony MEX-N4380BT Manual de usuario

Kenwood

Kenwood KCD-BT6544U/UY Manual de usuario

JVC

JVC KD-DB912BT Manual de usuario

Philips

Philips CSQ405/98 Manual de usuario

Alpine

Alpine TDM-7544 Manual de usuario

Autotek

Autotek TransAm TA 1400 Manual de usuario

Denso TEN

Denso TEN FT0108A Manual de usuario

Pyle

Pyle PLD57MU Manual de usuario

Harman

Harman Chrysler Radio Navigation System RB4 Manual de usuario

JVC

JVC KW-R910BT Manual de usuario

Eclipse

Eclipse CD2000 Manual de usuario

JVC

JVC KD-G525 Manual de usuario