09
7. Menu
The Menu button serves as the master control for scrolling through
functions for light intensity as a dimmer, color temperature and
channel values. A short press changes the function. The first in the
sequence is Brightness Dimmer (red light), second is Color
Temperature (yellow) and third is Blend (red and yellow lamp), a
combination of the 5600˚ and 3200˚K bulbs to achieve maximum
output at 4400˚K. Press and the menu button briefly to cycle change
modes between Dimmer, Color and Channel selection, and for a few
seconds, to change from the daylight, bi-color selection and to enter
the enhanced 4400˚K mode. Long press again to return to the
Dimmer/Color mode selections.
1. When powering on, the default setting is the daylight 5600˚K mode,
the red indicator light is on, indicating Brightness Dimmer mode. The
light is not in bi-color mode, and the only options are for channel and
dimmer values, with no option of color temperature.
2. Press and hold the menu button for a few seconds, the yellow
indicator light flickers, indicating Color mode. The light will be changed
to complete bi-color mode (with option of channel, dimmer and color
temperature) when this is selected.
3. Press and hold the menu button for a few seconds, both the red and
yellow indicator lights flicker. When both red and yellow indicator lights
are lit, the linked LED light will be changed to enhanced 4400K mode.
Under this mode, all of the LED bulbs are glowing, both 3200K and
5600K, blending in bi-color temperature and all can be at full
brightness at the same time.
4. Press and hold the menu button for a few seconds, the red indicator
light flickers, indicating a return to the Brightness Dimmer mode. The
light will be able to be controlled for the options of channel and
dimmer, with no option of color temperature.
