clair B1BU0533 Manual de usuario
제품 설명서
User Manual
操作说明书
공기청정기
Air Purifier
空气净化器
www.clair-b.com
CLAIR, Inc.
B1BU0533
Product components
Names of each part
Bottom cover
LED Lamp
Main Body USB Cable User Manual
Filter
FRONT
Air outlet
Air inlet
Control unit
Access door
BACK
How to use
1. Disconnect product and USB
cable from the packaging.
2. Connect USB cable to micro 5
pin terminal (or USB connector) in
the center of backside of main
body.
3. Connect USB cable to power
devices such as DC USB adapter
or cigar jack, laptops and
computers, spare batteries.
4. Press the power button to
activate the product.
5. Turn the head of the product
clockwise to adjust for purified air
to be emitted to desired direction
(rotatable up to 180 degrees).
1. Do not rotate more than 180 degrees or
in an anticlockwise direction
2. Make sure to disconnect USB cable after
disconnecting power supply.
3. Make sure to use a proper standard DC cigar
jack in case of the cars using DC 24V battery.
※ Caution!
Operation mode
Move slowly to the left and right
Move to left and right
Move fast to left and right
LED lamp OFF
Indoor (step 1) mode
Vehicle (step 2) mode
Turbo (step 3) mode
Operation method
Press the power button once
Press the power button twice
Press the power button 3 times
Press the power button 4 times
Press the power button for longer than
2 seconds regardless of mode
Operation details
Stop operation
LED lamp
Product Specifications
Model
Input power
Operation mode and
Power consumption
Dimension
Net Weight
B1BU0533
DC 5V, 1.0A
stage 2stage 1 stage 3
1.6W1.4W 2W
75.5mm x 173mm
0.28kg
Gross Weight 0.5kg
1. Do not rotate more than 180 degrees or
in an anticlockwise direction
Filter replacement and cleaning
1. Turn off the power of the main body and
disconnect USB cable.
2. Open and grab the ring on the bottom cover
and turn in the direction of the arrow as shown
in the figure.
3. Disconnect filter module from the main body
holding the outside of the body. 4. Remove dust accumulated on the surface of
filter and the bottom cover using vacuum cleaner
or small brush once every 1~2 months.
5. Remove dirty filter and replace it with new
clean filter (recommended to replace around
every 4 months).
6. Assemble in the reverse order and fix it by
turning in the opposite direction of the arrow until
hearing click sound.
Installation-related precautions
Power related cautions
- Do not extend USB cable arbitrarily.
- Do not damage USB cable by bending or
pulling excessively.
- Do not use damaged or loosened USB cable.
- Do not turn off the product by pulling USB
cable.
- Make sure to disconnect USB cable from the
product during cleaning.
- Do not touch the product or USB cable with
wet hand.
- Be careful for the children not to touch or
operate.
- Do not install the product in the place with risk
of gas leakage.
- Do not install the product in the place with
industrial oil, smoke or metallic dust.
- Install the product away from direct sunlight.
Leaving it in the vehicle for a long time may
cause damage especially in summer.
- Do not install the product on a wet floor.
- Do not install the product sloped place or
bumpy floor.
- Check if there is any obstacle around air inlet or
outlet.
- Hold main body not air outlet during transport
of the product.
- Use the USB cable after inserting completely for
the USB cable not to be shaken.
- Do not make the air inlet and outlet be blocked
with dust.
- Do not use around hot object like stove or
place with a risk of fire.
- Do not turn the head of the product in the
opposite direction with excessive force.
- Do not use the product with laid down
position.
- Do not disconnect the filter from main body
during using.
- Do not use detergent to clean the surface of
the product.
- Avoid direct skin contacting including
smelling with nose contacted or touching.
- If filter contaminated, remove dust with using
vaccum cleaner and small brush after opening
the rear cover.
- Water cleaning is not recommended as it
may cause degradation of the filter.
- Filter can be contaminated if the product is
not operated for a long time. Keep the
product sealed with plastic cover.
* Not obeying power-related precautions may cause
injury or product damage by electric shock or fire.
* Not obeying operation precautions may cause fire,
malfunction, damage, purifying performance
degradation.
* Not obeying installation-related precautions may
result in the failure of the product including purifying
performance degradation or abnormal noise. It also
may cause a risk of electric shock or fire.
* Not obeying installation-related precautions may result
in health problem or lowering the product performance
because of functional deterioration of the filter.
Operation precautions Filter-related precautions
Safety precautions
Checklist before repair requesting
Symptoms Checklist and measures
It doesn’t operate.
It makes noise.
It smells.
Is USB cable inserted in to the product properly?
Is power plug like adapter or cigar jack plugged correctly
into wall outlet (or car cigarette lighter socket)?
▶ Plug USB cable into the product or power supply properly?
It the product shaking not fixed properly?
Is there any object around the product obstructing airflow or
on the product?
▶ Please install the product on flat floor.
Isn’t the outlet or inlet dirty?
▶ Remove contaminants around outlet, inlet and filter.
If not improved, replace the filter with new one.
Is it used on the room with strong smell?
▶ If it is used at the place with strong smell of smoking or
baking meat for a long time, you need to replace the filter
in the short term. We recommend that you ventilate the room regularly.
B1BU0533
Warranty Certificate
CLAIR, Inc. implements the warranty of the product as below according to
the consumer indemnification regulation.
Customer service center 080-581-2917
Customer information
Name
Address
Tel.
Mobile.
E-mail
Product name
Model name
Date of Purchase
Warranty period
Manufacturing date
Manufacturer
Homepage
clairB
year months date
1 year from purchase date
Indicated separately
CLAIR, Inc.
www.clair-b.com
※ Please safely store this certificate with your user manual as it cannot be re-issued.
* The warranty period of clair product is 1 year from the purchase date.
* The compensation and reception notice shall be made within 7 days from
application date, and repair and compensation shall be made within 14 days from
the application date.
(excluding holiday and national holidays)
* The below shall be subject to paid repair.
- In case of failure by using non-authentic components
- In case of failure by negligence of user or by arbitrary repair and modification
- In case of failure by non-implementation of matters defined in the user
manual
* Paid repair is available after the warranty period.
* Provide warranty certificate in the event of repair application.
产品组成
主机 USB 电缆 使用说明书
过滤
各部件名称
电源开关
USB 连接部
下面盖子
背面
前面
排气口
LED 灯
吸气口
使用方法
1. 从包箱拿出产品和USB电缆。 2. 将USB电联链接在主体背面中
央的USB 5针端子。
3. 将USB电缆连接在DC USB 连
接器或点烟器、笔记本及电脑、
辅助电池等电源装置（选项）等
。
4. 按住电源开关驱动产品。 5. 将产品头部往顺时针方向旋转
使得净化空气排出。
(旋转角度为180度)
1. 禁止超越180度的旋转或往逆时针方向旋转。
2. 应该关闭电源后，拔掉USB电缆。
3. 使用DC 24V电池汽车的情况下，确保使用恰
当的标准DC点烟器。
※注意！
Tabla de contenidos
Otros manuales de Purificador de aire de clair
