Citizen CT-S310IIET Manual de usuario

MODEL : CT-S310IIET

Ethernet Interface function

Manual

Ver.1.01

Contents

Contents.........................................................................................................................2

Read before using .........................................................................................................3

1. Introduction .............................................................................................................4

1-1. Specifications ......................................................................................................................... 4

1-2. Part Names and Functions................................................................................................... 5

1-3. LED Functions....................................................................................................................... 6

1-4. Using the Panel Button ........................................................................................................ 7

1-4-1. Printing the Network Configuration................................................................................... 7

1-4-2. Returning the Network Configuration to Factory Default Settings................................. 8

1-5. Print Server ........................................................................................................................... 9

1-5-1. Accessing Print Server Configuration screen..................................................................... 9

1-5-2. Changing the Print Server Configuration ........................................................................ 10

2. Network Settings...................................................................................................12

2-1. Network settings from the browser ................................................................................... 12

2-1-1. Accessing the Print Server configuration screen ............................................................. 12

2-1-2. Setting the IP address........................................................................................................ 12

2-1-3. Changing other settings..................................................................................................... 13

2-2. Network setting from “Network Seeker”........................................................................... 14

2-2-1. Starting Network Seeker ................................................................................................... 14

2-2-2. Changing Settings.............................................................................................................. 16

Read before using

Be sure to read this manual carefully before using the product. After you read it, store it in a

safe place so that you can reread it when necessary.

Contents of this manual may be changed without notice.

Reproducing and/or copying the contents of this manual by any means without

permission are prohibited.

We will not be responsible for any adverse occurrence that results from the use of this

manual, regardless if it contains omissions, errors/misprints, etc.

Note that we will not be responsible for (a) loss caused by improper operation or

mishandling of the device by the user, or (b) loss due to operational environment.

Data etc., are basically impermanent; long time or permanent storing/saving of data by

the device is not possible.

Note that we will not be responsible for any loss or loss of profits owing to loss of data

due to breakdown, repairs, inspections, etc.

Please contact us if there are omissions, errors, ambiguities, etc. in this manual.

Refer to this document along with the user manual of the printer.

This product operates by setting up a wireless connection between itself and other

wireless LAN equipment for data transmission. Therefore, other wireless LAN

equipment is required to use this product. While we have confirmed the operation of

this product with certain wireless LAN equipment, operation with all types of wireless

LAN equipment is not guaranteed. Carry out a sufficient evaluation before using this

product.

Trademarks

・Microsoft, Windows XP, Windows Vista, Windows 7, Windows 8 and Windows10 are

registered trademarks of Microsoft Corporation U.S.A.

・Ethernet is a registered trademark of Fuji Xerox Co., Ltd.

・Other company names and product names mentioned here are trademarks or

registered trademarks of those companies.

1. Introduction

Thank you for purchasing the Citizen CT-S310II printer.

This manual is to explain the details of the Ethernet interface function of the printer.

Using Ethernet function, you can relay data between a network of multiple computers and

the printer. In addition, the computers and printer are able to communicate with each other:

the operational status, print settings, and other information about the printer can be

checked from computers on the network.

1-1. Specifications

Printer model name CT-S310IIET （Ethernet Interface model）

Operation panel LED: 2 (RJ45 connector)

Button: 1 (on panel)

Network Interface Auto-Negotiation (100Base-TX/10-Base-T)

AUTO-MDIX (Straight/Cross cable auto detection)

IP Version IPv4

Network protocols TCP, UDP, HTTP, SNMP, ICMP, DHCP

Port number for printing TCP 9100 (Default)

Configuration changes

from the browser Yes

Interactive communication Yes (only when CITIZEN TCP/IP port driver is used)

Safety standards VCCI Class A

CITIZEN Label Printer Library for Windows - Programming Manual

1-2. Part Names and Functions

External view of Ethernet interface

①Cash Drawer connector

Connection for cash drawer

②USB connector

Works as standard USB connector

③Panel button

Used to operate the Ethernet function.

④RJ45 connector (compatible with 10Base-T/100Base-TX)

Connection for LAN cable.

⑤Green LED

Shows network transmission speed with steady/blinking light.

⑥Yellow LED

Shows network connection status (disconnected, receiving data, etc.)

①

②

③

④

⑤

⑥

Introduction

1-3. LED Functions

The following charts show what each LED indicator indicates.

①Network transmission speed

Transmission speed

LED (green)

100 Mbps

10 Mbps / disconnected

Off

②Link status with network

Link status

LED (yellow)

Connected

Disconnected

Off

Transmitting data

Flashing

①

②

CITIZEN Label Printer Library for Windows - Programming Manual

1-4. Using the Panel Button

The panel button on the operation panel is used to operate the Ethernet function. You can

use it to print settings information and restore factory default settings.

1-4-1.Printing the Network Configuration

Press the panel button to print out the network configuration.

■Configuration items that are printed

①Title of the printout.

②Firmware version of printer..

③Network settings such as the IP address

currently being used. When the network is

not connected, the IP address is “0.0.0.0”.

④Same data as configuration settings on the

Print Server Configuration screen.

*** If panel button is pressed within 60

seconds after power on with DHCP enabled

settings, IP address may not be obtained yet.

In such case, IP address is shown as 0.0.0.0.

Network

Information

Firm Ver. : DT10-000X

Current Status

IP Addr. : 192.168.11.4

Subnet : 255.255.255.0

Gateway : 192.168.11.1

User Configuration

Host Name : no name

MAC : 00:01:02:0a:0b:0c

IP Addr. : 169.254.1.10

Subnet : 255.255.0.0

Gateway : 0.0.0.0

DHCP : ON

PrintPort : 9100

Timeout : 60

①

②

③

④

Panel Button

Introduction

1-4-2.Returning the Network Configuration to Factory Default Settings

1) Press and hold the panel button.

2) When you hear the beep, press and hold the panel button again within 3 seconds.

The following message is printed, and the network settings return to factory default

settings.

]

When the operation is complete, the printer restarts automatically.

When the network setting is set to automatically obtain the IP address from the DHCP

server, the IP address assigned may be different from the previous one.

Warning

I/F Board

Information

--!Caution!--

Printer will

automatically restart.

Network

Information

CITIZEN Label Printer Library for Windows - Programming Manual

1-5. Print Server

Using a Web browser, you can go to the Print Server Configuration screen to view or

change the network settings.

1-5-1.Accessing Print Server Configuration screen

1) Launch your browser and go to the URL of the Print Server Configuration screen.

For the URL, enter the IP address assigned to the printer.

(For example, if the IP address is “169.254.1.10”, enter “http://169.254.1.10”.)

2) Print Server Configuration page to show current settings appears.

3) By clicking “Edit” button, screen move to the page to change the settings.

Introduction

1-5-2.Changing the Print Server Configuration

By clicking “Edit” button, screen is changed for the page to change the network settings.

[Back] button: The page moves back to the page to check the current network settings.

[Cancel] button: The entry data on this page is canceled.

[Save] button: The entry data on this page is saved and move the page below then the

printer reboots after few seconds.

When the operation is complete, the printer restarts automatically.

When the network setting is set to automatically obtain the IP address from the DHCP

server, the IP address assigned may be different from the previous one.

Warning

Tabla de contenidos

Otros manuales de Impresora de Citizen

Citizen

Citizen PD 24 PD-24 PD-24 Manual de usuario

Citizen

Citizen CT-S601 II Manual de usuario

Citizen

Citizen iDP-3540/3541 Manual de usuario

Citizen

Citizen CT-S281 Series Manual de usuario

Citizen

Citizen iDP-460 Manual de usuario

Citizen

Citizen CBM-1000 Manual de usuario

Citizen

Citizen CMP-20 Manual de usuario

Citizen

Citizen CBM-262 Type II Manual de usuario

Citizen

Citizen JR10-M01 Manual de usuario

Citizen

Citizen CMP-30 series Manual de usuario

Citizen

Citizen CD-S500 series Manual de usuario

Citizen

Citizen PD-24 Manual de usuario

Citizen

Citizen Mini Printer Manual de usuario

Citizen

Citizen CBM-231 Manual de usuario

Citizen

Citizen Z-START CLP-521Z Manual de usuario

Citizen

Citizen CLP 8301 CLP-8301 CLP-8301 Manual de usuario

Citizen

Citizen CT-D150 Manual de instalación

Citizen

Citizen CT-S801 Manual de usuario

Citizen

Citizen CD-S500 series Manual de instalación

Citizen

Citizen LINE THERMAL PRINTER CT-S280 Manual de instalación

Citizen

Citizen CBM-920II Manual de usuario

Citizen

Citizen CT-S851 Manual de usuario

Citizen

Citizen CT-S4000 Manual de usuario

Citizen

Citizen iDP-3550 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario