Cisco ASR 5000 Series Manual de usuario

Overview

This chapter provides an overview of the Cisco 5000 Series routers.

The Network Convergence System 5000 Series offers a high-density, small-form-factor MPLS aggregation

router for metro aggregation. It is designed to economically scale large enterprise, over-the-top (OTT), and

service provider Data Center networking architectures.

•Overview, on page 1

•Cisco NCS 5001, on page 1

•Cisco NCS 5002, on page 3

•Cisco NCS 5011, on page 6

•Cisco NCS 5064, on page 9

Overview

This chapter provides an overview of the Cisco 5000 Series routers.

The Network Convergence System 5000 Series offers a high-density, small-form-factor MPLS aggregation

router for metro aggregation. It is designed to economically scale large enterprise, over-the-top (OTT), and

service provider Data Center networking architectures.

Cisco NCS 5001

Cisco NCS 5001 Overview

The Cisco NCS 5001 router is an extension to Cisco's routing platform portfolio enabling Service Providers

and MPLS enabled data center architectures to offer elastic networks with improved business agility and

simplified operations to deliver high-bandwidth mobile, video, and cloud services.

It can also operate as an extension shelf of Cisco ASR 9000 Series Aggregation Services Routers using

Network Virtualization (nV) technology, consolidating multiple layers in the network and dramatically reducing

operational costs.

The Cisco NCS 5001 router is a small form factor dense GE/10GE aggregation systems. Powered by industry

leading routing operation system, IOS-XR, the system also offers rich functions such as third party application

hosting, machine-to-machine interface, telemetry and flexible package delivery.

Overview

Figure 1: Cisco NCS 5001 Router - Back (Fan Side) View

Figure 2: Cisco NCS 5001 Router - Front (Port Side) View

Ports

Cisco NCS 5001 router consists of the following ports:

• 40 x One GE/10GE SFP+ ports

• 16 x Regular 10G SFP+ Ports

• 24 x DWDM and ZR Capable 10G SFP+ Ports (Purple in color)

• 4 x 100G QSFP28 ports (Light Green in color)

Features

The Cisco NCS 5001 router has the following features:

• Two 1+1 redundant, hot-swappable power supplies, which provide port side intake or exhaust for cooling

• Two 1+1 redundant, hot-swappable fan modules, which provide port side intake or exhaust for cooling

• A management and console interface are on the port (front) side of the router whereas the USB interface

on the fan (back) side of the router.

Power Supply

The Cisco NCS 5001 chassis has slots for two 1+1 redundant power supplies. Power supply options need to

be configured with the base chassis. A minimum of one power supply is required for normal operation. The

following table lists the power supplies that are configurable with the Cisco NCS 5001 router.

Overview

Cisco NCS 5001

Table 1: Power Supplies for the Cisco NCS 5001 router

Power SupplyPart Number

Cisco NCS 5000 Power DC 930W Front to Back AirflowNC5K-PDC-930W-FR

Cisco NCS 5000 Power DC 930W Front to Back Airflow, spareNC5K-PDC-930W-FR=

Cisco NCS 5000 Power DC 930W Back to Front AirflowNC5K-PDC-930W-BK

Cisco NCS 5000 Power DC 930W Back to Front Airflow, spareNC5K-PDC-930W-BK=

Cisco NCS 5000 Series Router Power AC 650W Front to Back AirflowNC5K-PAC-650W-FR

Cisco NCS 5000 Series Router Power AC 650W Front to Back

Airflow, spare

NC5K-PAC-650W-FR=

Cisco NCS 5000 Series Router Power AC 650W Back to Front AirflowNC5K-PAC-650W-BK

Cisco NCS 5000 Series Router Power AC 650W Back to Front

Airflow, spare

NC5K-PAC-650W-BK=

Fan Modules

The Cisco NCS 5001 chassis has slots for two 1+1 redundant fan modules. The fan modules are hot-swappable.

Fan modules operate in an 1+1 redundancy mode. Fan options need to be configured with the base chassis.

The Cisco NCS 5001 system supports both forward and reverse airflow. The system can work with a single

fan failure. More than one fan failure leads to system shutdown. The following table lists the fan modules

that are configurable with the Cisco NCS 5001 router.

Table 2: Fan Modules for the Cisco NCS 5001 router

Fan ModulePart Number

Cisco NCS 5001 Router Fan Front to Back AirflowNCS-5001-FN-FR

Cisco NCS 5001 Router Fan Front to Back Airflow, spareNCS-5001-FN-FR=

Cisco NCS 5001 Router Fan Back to Front AirflowNCS-5001-FN-BK

Cisco NCS 5001 Router Fan Back to Front Airflow, spareNCS-5001-FN-BK =

Cisco NCS 5002

The Cisco NCS 5002 router is also an extension to Cisco's routing platform portfolio enabling Service Providers

and MPLS enabled data center architectures to offer elastic networks with improved business agility and

simplified operations to deliver high-bandwidth mobile, video, and cloud services.

It can also operate as an extension shelf of Cisco ASR 9000 Series Aggregation Services Routers using

Network Virtualization (nV) technology, consolidating multiple layers in the network and dramatically reducing

operational costs.

Overview

Cisco NCS 5002

The Cisco NCS 5002 router is a small form factor dense GE/10GE aggregation systems in 2RU form factor.

third party application hosting, machine-to-machine interface, telemetry and flexible package delivery.

Figure 3: Cisco NCS 5002 - Back (Fan Side) View

Figure 4: Cisco NCS 5002 - Front (Port Side) View

Ports

Cisco NCS 5002 router consists of the following ports:

• 80 x One GE/10GE SFP+ ports

• 40 x Regular 10G SFP+ Ports, on baseboard

• 40 x DWDM and ZR Capable 10G SFP+ Ports, on mezzanine (Cisco Metallic Grey in color)

• 4 x 100G QSFP28 ports (Light Green in color)

Features

The Cisco NCS 5002 router has the following features:

• Two 1+1 redundant, hot-swappable power supplies, which provide port side intake or exhaust for cooling

• Two 1+1 redundant, hot-swappable fan modules, which provide port side intake or exhaust for cooling

• A management, console, and the USB interface on the port (front) side of the router

Overview

Cisco NCS 5002

Power Supply

The Cisco NCS 5002 chassis has slots for two 1+1 redundant power supplies. Power supply options need to

be configured with the base chassis. A minimum of one power supply is required for normal operation. The

following table lists the power supplies that are configurable with the Cisco NCS 5002 router.

Table 3: Power Supplies for the Cisco NCS 5002 router

Power SupplyPart Number

Cisco NCS 5000 Power DC 930W Front to Back AirflowNC5K-PDC-930W-FR

Cisco NCS 5000 Power DC 930W Front to Back Airflow, spareNC5K-PDC-930W-FR=

Cisco NCS 5000 Power DC 930W Back to Front AirflowNC5K-PDC-930W-BK

Cisco NCS 5000 Power DC 930W Back to Front Airflow, spareNC5K-PDC-930W-BK=

Cisco NCS 5000 Series Router Power AC 650W Front to Back

Airflow

NC5K-PAC-650W-FR

Cisco NCS 5000 Series Router Power AC 650W Front to Back

Airflow, spare

NC5K-PAC-650W-FR=

Cisco NCS 5000 Series Router Power AC 650W Back to Front

Airflow

NC5K-PAC-650W-BK

Cisco NCS 5000 Series Router Power AC 650W Back to Front

Airflow, spare

NC5K-PAC-650W-BK=

Fan Modules

The Cisco NCS 5002 chassis has slots for two 1+1 redundant fan modules. The fan modules are hot-swappable.

Fan modules operate in an 1+1 redundancy mode. Fan options need to be configured with the base chassis.

The Cisco NCS 5002 system supports both forward and reverse airflow. The system can work with a single

fan failure. More than one fan failure leads to system shutdown. The following table lists the fan modules

that are configurable with the Cisco NCS 5002 router.

Table 4: Fan Modules for the Cisco NCS 5002 router

Fan ModulePart Number

Cisco NCS 5002 Router Fan Front

to Back Airflow

NCS-5002-FN-FR

Cisco NCS 5002 Router Fan Front

to Back Airflow, spare

NCS-5002-FN-FR=

Cisco NCS 5002 Router Fan Back

to Front Airflow

NCS-5002-FN-BK

Cisco NCS 5002 Router Fan Back

to Front Airflow, spare

NCS-5002-FN-BK=

Overview

Cisco NCS 5002

Cisco NCS 5011

The Cisco NCS 5011 router is also an extension to Cisco's routing platform portfolio enabling Service Providers

and MPLS enabled data center architectures to offer elastic networks with improved business agility and

simplified operations to deliver high-bandwidth mobile, video, and cloud services.

The Cisco NCS 5011 router consists of 32 QSFP+/QSFP28 ports. The NCS 5011 system supports 10GE,

25GE, 40GE, 50GE, and 100GE.

The Cisco NCS 5011 system extends 4x10G, 4x25G, and 2x50G breakout support for Copper Optics.

Configure Breakout

Log into the router in the config mode, and type the following command (in this example, the breakout optics

is inserted in port 0):

RP/0/RP0/CPU0:router(config)# controller optics 0/0/0/0 breakout 4x10

RP/0/RP0/CPU0:router(config)# controller optics 0/0/0/0 breakout 4x25

RP/0/RP0/CPU0:router(config)# controller optics 0/0/0/0 breakout 2x50

• The broken out interfaces are named as follows:

• tenGigE 0/0/0/0/0, tenGigE 0/0/0/0/1, tenGigE 0/0/0/0/2, and tenGigE 0/0/0/0/3

•twentyFiveGigE 0/0/0/0/0, twentyFiveGigE 0/0/0/0/1, twentyFiveGigE 0/0/0/0/2, and twentyFiveGigE

0/0/0/0/3

• FiftyGigE 0/0/0/0/0, FiftyGigE 0/0/0/0/1

• The above commands fail if the optics inserted do not support breakout. Only copper optics are currently

supported.

• The commands succeed if there are no optics inserted, and the breakout is executed whenever optics are

inserted at a later stage.

Note

Overview

Cisco NCS 5011

Figure 5: Cisco NCS 5011 - Back (Fan Side) View

Figure 6: Cisco NCS 5011 - Front (Port Side) View

Ports

Cisco NCS 5011 router consists of the following ports:

• 2 x 10GE SFP + ports

• 32 x 100G QSFP28-100 ports

Features

The Cisco NCS 5011 router has the following features:

• Two 1+1 redundant, hot-swappable power supplies, which provide port side intake or exhaust for cooling

• Four 3+1 redundant, hot-swappable fan modules, which provide port side intake or exhaust for cooling

• A management, console, and the USB interface on fan side of the router

Overview

Cisco NCS 5011

Power Supply

The Cisco NCS 5011 chassis has slots for two 1+1 redundant power supplies. Power supply options need to

be configured with the base chassis. A minimum of one power supply is required for normal operation. The

following table lists the power supplies that are configurable with the Cisco NCS 5011 router.

Table 5: Power Supplies for the Cisco NCS 5011 router

Power SupplyPart Number

Cisco NCS 5000 Power DC 930W Front to Back AirflowNC5K-PDC-930W-FR

Cisco NCS 5000 Power DC 930W Front to Back Airflow, spareNC5K-PDC-930W-FR=

Cisco NCS 5000 Power DC 930W Back to Front AirflowNC5K-PDC-930W-BK

Cisco NCS 5000 Power DC 930W Back to Front Airflow, spareNC5K-PDC-930W-BK=

Cisco NCS 5000 Series Router Power AC 650W Front to Back

Airflow

NC5K-PAC-650W-FR

Cisco NCS 5000 Series Router Power AC 650W Front to Back

Airflow, spare

NC5K-PAC-650W-FR=

Cisco NCS 5000 Series Router Power AC 650W Back to Front

Airflow

NC5K-PAC-650W-BK

Cisco NCS 5000 Series Router Power AC 650W Back to Front

Airflow, spare

NC5K-PAC-650W-BK=

Fan Modules

The Cisco NCS 5011 chassis has slots for four 3+1 redundant fan modules. The fan modules are hot-swappable.

Fan options need to be configured with the base chassis. The Cisco NCS 5011 system supports both forward

and reverse airflow. The system can work with a single fan failure. More than one fan failure leads to system

shutdown. The following table lists the fan modules that are configurable with the Cisco NCS 5011 router.

Table 6: Fan Modules for the Cisco NCS 5011 router

Fan ModulePart Number

Cisco NCS 5011 Router Fan Front

to Back Airflow

NCS-5011-FN-FR

Cisco NCS 5011 Router Fan Front

to Back Airflow, spare

NCS-5011-FN-FR=

Cisco NCS 5011 Router Fan Back

to Front Airflow

NCS-5011-FN-BK

Cisco NCS 5011 Router Fan Back

to Front Airflow, spare

NCS-5011-FN-BK=

Overview

Cisco NCS 5011

Cisco NCS 5064

The Cisco NCS 5064 router, which is also an extension to Cisco's routing platform portfolio enabling Service

Providers and MPLS enabled data center architectures to offer elastic networks with improved business agility

and simplified operations to deliver high-bandwidth mobile, video, and cloud services.

The Cisco NCS 5064 router is a small form factor dense 100GE aggregation systems in 2RU form factor.

third party application hosting, machine-to-machine interface, telemetry and flexible package delivery.

Figure 7: Cisco NCS 5064 - Back (Fan Side) View

Figure 8: Cisco NCS 5604 - Front (Port Side) View

Overview

Cisco NCS 5064

Ports

Figure 9: Cisco NCS 5604 Port Label

• 64 QSFP28 ports with the capability of operating at 100G and 40G rates.

• Ports 0-15 also support dynamic breakout with these combinations: 4x10G, 4x25G, and 2x50G.

• Ports 48-63 may also support MACsec in a future release.

• 2 x 10GE SFP+ ports (although physically present, these are not supported by IOS-XR).

Configure Breakout

Log into the router in the config mode, and type the following command (in this example, the breakout optics

is inserted in port 0):

RP/0/RP0/CPU0:router(config)# controller optics 0/0/0/0 breakout 4x10

RP/0/RP0/CPU0:router(config)# controller optics 0/0/0/0 breakout 4x25

RP/0/RP0/CPU0:router(config)# controller optics 0/0/0/0 breakout 2x50

• The broken out QSFP interface will be named as following, depending on the break out mode:

• 4x10G: TenGigE 0/0/0/0/0, TenGigE 0/0/0/0/1, TenGigE 0/0/0/0/2, and TenGigE 0/0/0/0/3

• 4x25G: TwentyFiveGigE 0/0/0/0/0, TwentyFiveGigE 0/0/0/0/1, TwentyFiveGigE 0/0/0/0/2, and

TwentyFiveGigE 0/0/0/0/3

• 2x50G: FiftyGigE 0/0/0/0/0, FiftyGigE 0/0/0/0/1

• The above commands fail if the optics inserted do not support breakout.

• The commands succeed if there are no optics inserted, and the breakout is executed whenever optics are

inserted at a later stage.

• For 4x10 breakout, copper and non-copper optics are also supported.

For 4x10 breakout, the supported optics type are : 40G SR4, 40G LR, 40G AOC, 40G PSM, 40G AC

(active copper), and 40G CR4 (passive copper).

Note

Features

The Cisco NCS 5064 router has the following features:

Overview

Cisco NCS 5064

Otros manuales para ASR 5000 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Enrutador de red de Cisco

Cisco

Cisco RV345 Manual de usuario

Cisco

Cisco ASR 1000 Series Manual del operador

Cisco

Cisco Linksys E-Series Guía de instalación

Cisco

Cisco ASR 903 Manual de usuario

Cisco

Cisco Cisco 881 Manual de usuario

Cisco

Cisco IR1101 Manual de usuario

Cisco

Cisco Catalyst 2820 Cómo utilizar

Cisco

Cisco CRS-1 - Carrier Routing System Router Manual de usuario

Cisco

Cisco ASR 907 Manual

Cisco

Cisco ASR1006 - ASR 1006 Modular Expansion Base Manual

Cisco

Cisco 1700 series Guía de instalación

Cisco

Cisco 3640 Series Manual de usuario

Cisco

Cisco Linksys WET610N Manual de usuario

Cisco

Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1... Manual de usuario

Cisco

Cisco 3800 Series Manual de usuario

Cisco

Cisco ASR 920 series Guía rápida

Cisco

Cisco NCS 5000 Series Manual

Cisco

Cisco 826 Manual de usuario

Cisco

Cisco ASR 5000 Manual de usuario

Cisco

Cisco 3800 Series Manual de usuario

Cisco

Cisco RV132W Manual de usuario

Cisco

Cisco 3800 Series Manual de usuario

Cisco

Cisco Linksys E1200 Instrucciones de uso

Cisco

Cisco 2851 - Integrated Services Router Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

EnGenius

EnGenius ESR-9710 Manual de usuario

LevelOne

LevelOne FBR-1416 Manual de usuario

Dynacord

Dynacord Promatrix 6000 Manual de usuario

Lorex

Lorex F5D8230-4 Manual de usuario