CipherLab CPT-720 Manual de usuario
i
The contents in this manual are copyrighted property of
Syntech Information Co., Ltd.
The information in this manual has been carefully checked
and is believed to be accurate. Syntech Information assumes
no responsibility for any inaccuracies that may be contained
in this document.
The information in this document is subject to change
without prior notice in order to improve reliability, design
and function, and does not represent a commitment on part
of the manufacture.
All right reserved. No part of the contents of this manual
may be reproduced or transmitted in any form or by any
means without prior written permission of Syntech
Information Co., Ltd.
ii
Table of Content
1. Introduction....................................................1
2. General Features and Characteristics..............2
2.1 Electrical ..............................................2
2.2 Environmental......................................2
2.3 Physical................................................2
2.4 CPU .....................................................2
2.5 Memory................................................3
2.6 Scanner.................................................3
2.7 Display.................................................4
2.8 Keypad.................................................4
2.9 Indicator...............................................4
2.10 Communication ..................................4
2.11 Programming Language......................5
2.12 Accessories.........................................5
3. Hardware Configuration.................................6
3.1 Front, Back and Side View....................6
3.2 RS-232 connection & IrDA connection.7
3.3 RF connection.......................................8
3.4 RS-485 connection ...............................9
4. Software Organization..................................10
4.1 Kernel module....................................10
4.2 System module...................................10
4.3 Application module ............................11
4.4 Build your own application.................12
5. Operations....................................................13
5.1 Keypad operations..............................13
5.2 Application mode ...............................14
5.3 System mode......................................14
5.4 Kernel mode.......................................18
6. Troubleshooting ...........................................19
1
1. Introduction
The CPT-720 Portable Terminal is a durable,
versatile, rugged data terminal designed for all-
day, everyday use. It is supported by a rich set of
development tools, including a Windows-based
application generator, “C”and “Basic”compilers.
In order to satisfy heavy-duty applications, the
CPT-720 can withstand 1.5-meter drops onto
concrete and can also be operated under extreme
temperature.With its integrated Laser/LRCCD
barcode scanning unit, expandable data memory,
and multiple communication interfaces, the CPT-
720 is today’s most flexible and reliable data
collection terminal.
2
2. General Features and Characteristics
Basic characteristics of the CPT-720 Portable Terminal are
listed below,
2.1 Electrical
ŸOperation battery : two AAA size batteries or Ni-
MH rechargeable battery pack
ŸBackup battery : 3.0V, 7.0mAh, rechargeable
Lithium battery for SRAM & calendar
ŸWorking time: 100 hours and more than 50,000
readings (with its CPU in low speed mode and 1
reading every 5 seconds).
2.2 Environmental
ŸHumidity (operating): non-condensed 10% to 90%
ŸHumidity (storage): non-condensed 5% to 95%
ŸTemperature (operating): -20 to 60 °C
ŸTemperature (storage): -30 to 70 °C
ŸEMC regulation: FCC class A, CE and C-Tick
approved
ŸWater resistance: IP-54
ŸShock resistance: 1.5m drop onto concrete
2.3 Physical
ŸDimensions: 203.6mm (L) x 79mm (W) x 39.6mm
(H)
ŸWeight: 330g (including batteries)
ŸColor: Dark gray
ŸMaterial: ABS
2.4 CPU
ŸToshiba 16-bit CMOS type CPU
ŸDual clock, can be switched to Low Clock to save
power (refer to the speed setting in section 5.3).
3
2.5 Memory
Program memory
Ÿ1 M Bytes flash memory is used to store the program
code, font, constant data, and so on.
Data memory
ŸBase memory: 256 K Bytes SRAM.
ŸExtended memory: 8 M Bytes Smart-Media card.
2.6 Scanner
The CPT-720 Portable Terminal can be equipped with Laser
or Long Range CCD scanners. Detail specifications are as
following:
CPT-720L (Laser)
ŸLight source: visible Laser diode operating at 670¡Ó
15nm
ŸScan rate: 36¡Ó3scans/sec
ŸScan angle: 42¢Xnominal
ŸMinimum print contrast: 20% absolute dark/light
reflectance at 670nm
ŸDepth of field: 5 ~ 95 cm, depends on barcode
resolution
CPT-720C (CCD)
ŸResolution: 0.15mm ~ 1.00mm
ŸDepth of field: 20cm
ŸWidth of field: 45mm ~ 124mm
ŸScan rate: 100 scans/sec
ŸAmbient Light Rejection:
1200 lux (Direct Sun-light)
2500 lux (Fluorescent Light)
4
2.7 Display
Ÿ128x64 graphic dots STN LCD display with LED
back-light
ŸIcons include battery low warning, alpha input, shift
mode, and Smart-Media card indication.
2.8 Keypad
Ÿ32 rubber keys, including alphanumeric keys, arrow
keys, function keys, and scan trigger key.
2.9 Indicator
Buzzer
ŸSoftware programmable audio indicator, 1KHz to
4KHz, low power transducer type.
LED
ŸProgrammable, dual-color (green and red) LED for
status indication.
2.10 Communication
Four kinds of communication are provided: standard RS-232,
Infrared, RS-485, and RF.
ŸRS-232: Transmission speed up to 115200bps
ŸInfrared: Standard IrDA 1.0 and high speed IR.
Transmission speed up to 115200bps
Distance: 5 to 100 cm
View angle: 30 degrees
ŸRS-485: Through cradle, multi-drop up to 32 units
ŸRF: Transmission rate up to 9600bps
Distance: up to 100 m
5
2.11 Programming Language
"C", "BASIC", and a Windows-based Application Generator
2.12 Accessories
ŸRS-232 cable
ŸHigh speed IR Transceiver
ŸCradle (for charging and communication)
ŸRF base station
ŸSmart-Media Card and Reader
6
3. Hardware Configuration
3.1 Front, Back and Side View
7
3.2 RS-232 connection & IrDA connection
720
Portable Data Terminal
RS-232 Connection
30
8
3.3 RF connection
RF Base
720
Portable Data Terminal
720
Portable Data Terminal
720
Portable Data Terminal
720
Portable Data Terminal
RF connection (up to 32 units)
Otros manuales para CPT-720
2
Tabla de contenidos
Otros manuales de Portátil de CipherLab
CipherLab
CipherLab 9300 Series Manual de usuario
CipherLab
CipherLab 9700 Manual de usuario
CipherLab
CipherLab CP60G Manual de usuario
CipherLab
CipherLab RS31 Manual de usuario
CipherLab
CipherLab 9400CE Manual de usuario
CipherLab
CipherLab CP30 Series Manual de usuario
CipherLab
CipherLab 80 0 Series Manual de usuario
CipherLab
CipherLab 9400 Series Manual de usuario
CipherLab
CipherLab CP50 G Instrucciones de montaje
CipherLab
CipherLab 8200 Manual de usuario
CipherLab
CipherLab 8300 Manual de usuario
CipherLab
CipherLab CP30 Series Manual de usuario
CipherLab
CipherLab 8001 Manual de usuario
CipherLab
CipherLab 8500 Series Manual de usuario
CipherLab
CipherLab CP60 Manual de usuario
CipherLab
CipherLab 8400 Series Manual de usuario
CipherLab
CipherLab 9700 Manual de usuario
CipherLab
CipherLab 8000 Manual de usuario
CipherLab
CipherLab 8700 Series Manual de usuario
CipherLab
CipherLab 8600 Manual de usuario
