Cino Fuzzyscan Manual de usuario
BARCODE SCANNER
FUZZYSCAN FAMILY
Quick Start Guide
1
Getting Familiar with Your FuzzyScan
Thank you for choosing Cino FuzzyScan Bar Code Scanner. All FuzzyScan
scanners deliver world-class performance for a broad range of applications to
unleash your productivity.
In order to fulfill your various requirements, the options of Vibrator, PDF
Readability and Disinfectant-ready Housing are available upon request.
For more details, please visit our website or contact your supplier.
This document provides an easy reference for installation and operation
purpose. The complete documentation is available at www.cino.com.tw.
F700/L700 Series F600/L600 Series
F500 Series F400 Series
Power Indicator Scan Window
Status Indicator Beeper
Trigger Cable Release Hole
2
Connecting to Your Host
FuzzyScan scanners support USB, PS/2(DOS/V) Keyboard Wedge and
RS-232 Serial interfaces. Please choose your desired interface cable, then
plug it into the cable interface port of the scanner and connect it to the host. If
you would like to remove the cable, please straighten one end of a paper clip,
then insert it into the cable release hole to pull out the cable.
S232 Serial
PS/2(DOS/V) Keyboard Wedge
USB HID & USB COM
USB HID (Human Interface Device)
The scanner works as a generic USB keyboard.
USB COM Port Emulation
The scanner works as a legacy RS232 serial device. Please note that you
have to install the USB Virtual COM software driver before using.
3
Using Accessories
You can enhance productivity of your workforce by using various accessories
to fulfill a wide variety of application demand.
Universal Holder
The stylish Universal Holder is designed for storing your scanner when not in
use. It serves to protect the scanner from lens-scratched or falling. Moreover,
its artistic-design enhances the entire value of the scanner.
Hand-free SmartStand
SmartStand is specifically designed for hand-free applications to maximize
user’s comfort and productivity. You can adjust the scanner holder to desired
position for optimized scanning. But please note that the SmartStand is not
applicable for F400 series scanner.
Thanks to the auto-sense design, the scanner is capable of switching
between presentation scanning and hand-held scanning automatically while
working with SmartStand. But please note that this feature is not available for
F400 and F500 series scanners.
In presentation mode, the barcode may not be detected by the scanner in an
environment with very dim ambient lighting. You can select higher sensitivity
level through the setting of Presentation Sensitivity to increase scanner’s
sensitivity.
Level 3
Level 1 Level 6
Level 4
Level 2 Level 7
Level 5
◆
4
Operation Modes
Both Fseries Linear Imager and Lseries Laser Imager are available in
FuzzyScan family. Both series support different operation mode which are
listed below for reference.
The F series supports nine operation modes, including trigger, presentation,
alternative, level, flash, force, toggle, diagnostic and low power modes. The L
series supports five operation modes, including trigger, presentation,
alternative, level and low power modes.
Trigger Mode
When trigger mode is selected, the scanner goes into standby state after
scanning the bar code. You must press the trigger switch to turn on the light
source of the scanner before scanning the bar code.
Presentation Mode
When presentation mode is selected, the scanner will turn on the light source
and start scanning operation automatically if it detects an image similar to a
bar code. In case the scanner can’t detect a bar code, it will turn off the light
source when the preset light source on time is up.
Alternative Mode
When alternative mode is selected, the scanner keeps the light source on till
the preset light source on time is up. After the scanner turns off the light
source, you must press the trigger switch to turn on the light source again.
After each good read, the timer counter of light source on time is reset. You
do not have to press the trigger frequently, it is very convenient for multiple
scanning.
Level Mode
When level mode is selected, the scanner continues to turn on the light
source till a bar code is decoded or preset light source on time is up. When a
bar code is decoded successfully, the scanner turns off the light source
immediately. After the scanner turns off the light source, you must press the
trigger switch to turn on the light source again. If there is no scanning
operation performed during the preset light source on time, the scanner will
turn off the light source after the preset light source on time is up.
5
Flash Mode
When flash mode is selected, the scanner flashes the light source without
having to press the trigger switch. If the scanner detects an image which is
similar to a bar code, it forces on the light source automatically and scans the
bar code.
Force Mode
When force mode is selected, the light source of the scanner is forced on for
continued operation without having to press the trigger switch. This mode is
convenient for high speed bar code reading.
Toggle Mode
When toggle mode is selected, you must press the trigger switch to turn on
the light source of the scanner to start scanning operation. The scanner
keeps the light source on until you press the trigger switch again. This mode
is very similar to alternative mode but without the preset light source on time
concern.
Diagnostic Mode
When diagnostic mode is selected, the light source of the scanner is forced
on without regard for other programmable parameters, such as reread delay,
redundancy, and so on.
Low Power Mode
When low power mode is selected, the scanner goes into idle state after
scanning the bar code. You must press the trigger switch to wake up the
scanner for operation.
6
Keyboard Interface Quick Set
- ecord Suffix -
None
RETURN
◆
TAB
SPACE
ENTER
- Keyboard Layout -
USA
◆
France
Germany
United Kingdom-UK
Canadian French
Spain (Spanish)
Spain (Latin America)
Nertherlands
Japan
Sweden/Finland
7
Serial Interface Quick Set
- ecord Suffix -
None TAB
LF
CR
◆
SPACE
CRLF
- Baud ate –
115.2K BPS 4800 BPS
19.2K BPS
57.6K BPS 2400 BPS
9600 BPS
◆
38.4 BPS 1200 BPS
- Data Frame -
8, None, 1
◆
7, None, 2
8, None, 2
8, Odd, 1 7, Odd, 2
7, Odd, 1
8, Even, 1 7, Even, 2
7, Even, 1
8, Space, 1 7, Space, 2
7, Space, 1
8, Mark, 1 7, Mark, 2
7, Mark, 1
8
System Commands
System Information
Master Default
PowerTool Host Link
User Default
Factory Default
Save User Default
Host Interface Quick Set
RS232 Serial
Keyboard Replacement
PS/2 (DOS/V) KBW Standard Mode
PS/2 (DOS/V) KBW Turbo Mode
USB HID Standard Mode
◆
USB HID Turbo Mode
USB Com Port Emulation
9
System Commands
PROGRAM
(Enter Programming Mode)
END
(Exit Programming Mode)
Option Codes
0
A
1
6
B
2
7
C
3
8
D
4
9
E
5 F
FIN (Finish)
Otros manuales para Fuzzyscan
8
Este manual sirve para los siguientes modelos
7
Tabla de contenidos
Otros manuales de Lector de código de barras de Cino
Cino
Cino FuzzyScan Series Manual de usuario
Cino
Cino F430 Series Manual de usuario
Cino
Cino FuzzyScan A770 Series Manual de usuario
Cino
Cino Fuzzyscan Manual de usuario
Cino
Cino Fuzzyscan Manual de usuario
Cino
Cino FuzzyScan F790WD Manual de usuario
Cino
Cino Fuzzyscan Manual de usuario
Cino
Cino FuzzyScan A780 Series Instrucciones de funcionamiento
Cino
Cino Fuzzyscan MBC6890 series Manual de usuario
Cino
Cino FuzzyScan Fixed Mount 400 Series Manual de uso y cuidado
Cino
Cino Fuzzyscan Manual de usuario
Cino
Cino FuzzyScan A770 Series Manual de usuario
Cino
Cino FuzzyScan F400 Series Manual de usuario
Cino
Cino FuzzyScan F400 Series Manual del propietario
Cino
Cino FUZZYSCAN F680 Series Manual de usuario
Cino
Cino FuzzyScan F700 Series Manual de usuario
Cino
Cino FUZZYSCAN F760 Series Bro Manual de usuario
Cino
Cino FuzzyScan F400 Series Manual de usuario
Cino
Cino FuzzyScan S680 Manual de usuario
Cino
Cino Fuzzyscan MBC6890 series Manual de usuario
