Ciays ETFPT2 Manual de usuario

Thank you for choosing this product! We strive to provide you with the
best quality products and services in the industry. Should you have
any issues, please don't hesitate to contact at
877-546-8648 Mon-Fri 8am - 8pm(CST)
Fire Pit Table Instruction Manual V1.0 (A)
Model: ETFPT2

- 1 -
Table of Contents
SAFETY INFORMATION ………………............................................ 2-5
PREPARATION …………………………...............…….......................... 6
SUPPLIED PARTS AND HARDWARE …………………................... 6-7
ASSEMBLING THE TABLE ………………………............................ 8-13
INSTALLING THE GAS CYLINDER IN THE HOLDER ASSEMBLY
....... 14-15
LOCATING FIRE PIT FOR USE ……………………............................ 16
OPERATION …………………….................................................... 17-19
MAINTENANCE AND STORAGE …………………..................... 20-21
FAQ …………………………................................................................. 22
Caution: Do not attempt to operate until you have read & understood all
General Safety Information in this manual and all assembly is complete &
leak checks have been performed.
Note: Before beginning assembly of the product, make sure all parts are
present. Compare parts with package content list and hardware contents. If
any part is missing or damaged do not attempt to assemble the unit. Con-
tact customer service for replacement parts.

Read the installation, operation and maintenance instructions before
installing, using or servicing this appliance. The appliance must be
installed in accordance with the instructions and local regulations.
Failure to comply with the precautions and improper installation, adjust-
ment, alteration, service or maintenance can cause injury or property
damage from hazards of fire, explosion, burn, asphyxiation, and/or carbon
monoxide poisoning.
Only persons who can understand and follow the instructions should use
or service this heater.
WARNING ForYour Safety
- 2 -
DANGER indicates an imminently hazardous situation which, if
not avoided, may result in death or serious injury.
DANGER
SAFETY INFORMATION
Do not store or use gasoline or other flammable vapor and liquids in the vicinity
of this or any other appliance.
DANGER
Do the leak test after each changing of the cylinder.
Never check for leaks with a match or open flame.
DANGER
CAUTION indicates an imminently hazardous situation which, if
not avoided, may result in minor or moderate personal injury or
property damage.
CAUTION
This appliance can produce carbon monoxide which has no odor.
Using it in an enclosed space can kill, cause injury or death.
For Outdoor Use Only (outside any enclosure). Never use this appli-
ance in an enclosed space such as a camper, tent, car or home.
DANGER Carbon Monoxide Hazard
WARNING indicates an imminently situation which, if not
avoided, may be hazardous result in death or serious injury.
WARNING

- 3 -
Solid fuels shall not be burned in this appliance.
DANGER
The maximum inlet gas supply pressure: Max . 250 PSI . Min 5 PSI
DANGER
Do not use this appliance if any part has been under water.
Immediately call a qualified service technician to inspect the appliance and to
replace any part of the control system and any gas control that has been under
water.
DANGER
For outdoor use only. Never use inside house or other unventilated or enclosed
areas. This heater consumes air (oxygen). Do not use in unventilated or enclosed
areas to avoid endangering your life.
DANGER
CARBON MONOXIDE HAZARD
Never store propane near high heat, open flames, pilot lights, direct sunlight,
other ignition sources or where temperatures exceed 120 degrees F (49°C). Pro-
pane vapors are heavier than air and can accumulate in low places. If you smell
gas, leave the area immediately.
Never install or remove propane cylinders while the heater is lighted, near flame,
pilot lights, other ignition sources or while the heater is hot to touch.
This heater is red hot during use and can ignite flammables too close to the
burner. Keep flammables at least 36" (91.44CM) from sides & 48" (121.92CM)
from top. Keep gasoline and other flammable liquids and vapors away from the
heater. The propane cylinder must always be stored outdoors in a well ventilated
space. Never store propane cylinder in an enclosed area (house, garage, etc.). If
the heater is to be stored indoors, disconnect the propane cylinder for outdoor
storage.
DANGER
EXPLOSION - FIRE HAZARD
Close the valve of the gas cylinder or regulator.
Extinguish all naked flames, do not operate any electrical appliances.
Check for leaks as detailed in these instructions.
DANGER IfYou Smell Gas

- 4 -
Surfaces of fire pit can remain extremely hot for a period after use. Allow 45
minutes to cool down before touching or moving the fire pit.
WARNING
WARNING: FUELS USED IN LIQUEFIED PROPANE GAS APPLIANCES, AND THE
PRODUCTS OF COMBUSTION OF SUCH FUELS CAN EXPOSE YOU TO CHEMI-
CALS INCLUDING BENZENE, WHICH IS KNOWN TO THE STATE OF CALIFORNIA
TO CAUSE CANCER AND CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE
HARM.
FORmoreinformationgoto:www.P65Warning.ca.gov
ADVERTENCIA: LOS COMBUSTIBLES USADOS EN EQUIPOS PARA LICUAR GAS
PROPANO, ASÍ COMO LOS PRODUCTOS DE COMBUSTIÓN, PUEDEN EXPONER-
LE A SUSTANCIAS QUÍMICAS, ENTRE ELLAS EL BENCENO, QUE EL ESTADO DE
CALIFORNIA RECONOCE COMO CAUSANTES DE CÁNCER, MALFORMACIONES
CONGÉNITAS U OTROS DAÑOS AL SISTEMA REPRODUCTOR.
Paramásinformación, visita:www.P65Warning.ca.gov
WARNING
An LP cylinder not connected for use should not be stored in the vicinity of this
or any other appliance.
WARNING
Caution: Do not attempt to operate until you have read & understood all
General Safety Information in this manual and all assembly is complete &
leak checks have been performed.

- 5 -
Never fill the cylinder beyond 80 percent full.
For appliances designed to use a CGA No.791 connection:
Place the dust cap on the cylinder valve outlet whenever
the cylinder is not in use.
Only install the type of dust cap on the cylinder valve that
is provided with the cylinder valve.
Other types of caps or plugs may result in leakage of
propane.
Note: Gas supply pressure: 25 to 250
You must provide propane gas and a propane cylinder. Use a standard 20 lb.
propane cylinder only.
Use this heater only with a propane vapor withdrawal supply system. See
Chapter 5 of the Standard for Storage and Handling of Liquified Petroleum
Gas, ANSI/NFPA 58. Your local library or fire department should have this
book.
The minimum permissible gas supply pressure of 10 W.C. is the required for
purpose of input adjustment.
The minimum hourly of 50,000 Btu is the required input rating for a heater
for automatic operation at ratings less than the full input rating.
The pressure regulator and hose assembly supplied with the appliance must
be used.
The installation must conform to local codes, or in the absence of local
codes, to the National Fuel Gas Code, ANSI Z223.1.
A dented, rusted or damaged propane cylinder may be hazardous and should
be checked by your cylinder supplier. Never use a propane cylinder with a
damaged valve connection.
The cylinder used must include a collar to protect the cylinder valve.
Do not store a spare LP gas cylinder under or near this appliance.
Standard 20 lb. tank
Warnings-About Propane Cylinder

- 6 -
Supplied Parts and Hardware
PREPARATION
--Select an area where you will assemble this product. To protect compo-
nents, choose a smooth non abrasive surface that's free of cracks or open-
ings.
--Spread out all the parts.
--Tighten all hardware connections by hand first. Before completing each
step, go back and fully tighten all hardware. Be careful not to over-tighten,
that could damage the surface or strip threads.
--For the best results, complete each in the order presented.
To complete the assembly you will need:
(1) Leak detection solution instructions on how to make the solution are
included in the “operating instructions” section of this manual.
(2) precision-filled LP gas grill tank with an Acme Type 1 external threaded
valve connection standard grill size.
Phillips Screwdriver
Tools Required (Not Included)
Supplied Hardware
Bolt
M6X25mm
4PCS
Bolt
M6X12mm
36PCS
AA
BB

- 7 -
Supplied Parts
NO.
A
B
C
D
E
F
G
DESCRIPTION
Cover Lid
Lava Rock
Table Top
Door Handle
Leg 2
Side Panel B
Leg 1
QUANTITY
1
1
1
1
2
2
1
NO.
H
I
J
K
L
M
N
DESCRIPTION
Door Connector
Door
Leg With Door Magnet
Side Panel A
Cylinder Holder Pole
Cylinder Holder
Cylinder Locking Knob
QUANTITY
1
1
1
1
2
1
1
K
F
IL
JE
L
H
E
C
B
A
F
M
N
D
G

- 8 -
Assembling the table
STEP 1
STEP 2
Attach 1pc Leg 2 [E] and 1pc Leg 1 [G] to the table top [C] with 6pcs
M6X12mm bolts [BB].
Attach the leg 2 [E] and leg with door magnet [J] to the side panel A [K] with
6pcs M6X12mm bolts [BB].
x1
x1x1
C E G
x6
BB
x1x1x1
E J K
x6
BB
E
C
G
BB
K
J
E
BBBB

- 9 -
STEP 3
STEP 4
Attach the panel with Legs (in Step 2) to the control knob side of the table
top [C] with 6pcs M6X12mm bolts [BB].
Attach the other side panel B [F] to leg 2 [E] with 6pcs M6x12mm bolts [BB].
x1
F
x6
BB
x6
BB
BB
BB
BB
K
J
E
G
C
E
G
J
F
EC
Tabla de contenidos

















