Page 7
The GAS GAS EC 2-cycle engines require a mixture of gasoline and oil. Use gasoline with an octane rating
equal to or higher than that shown in the table.
NOTE
NOTENOTE
NOTE
If knocking or pinging occurs, try a different brand of gasoline
or higher octane grade.
WARNING
WARNINGWARNING
WARNING
Gasoline is extremely flammable and can be explosive under certain
conditions. Always stop the engine and do not smoke. Make sure
the area is well ventilated and free from any source of flame or
sparks; this includes any appliance with a pilot light.
Mixing oil inside the engine
Mixing oil inside the engineMixing oil inside the engine
Mixing oil inside the engine
Oil must be mixed with gasoline to lubricate the piston, cylinder, crankshaft, and connecting rod bearings.
Recommended oil:
Recommended oil:Recommended oil:
Recommended oil:
2-CYCLE SYNTHETIC
NOTE
NOTENOTE
NOTE
If the recommended oil is not available, use only oil designed
for racing with 2-cycle engines.
Gasoline and engine oil mixing proportions:
Synthetic oil 100%: gasoline 50, engine oil 1 = 2%
Semi-synthetic oil: gasoline 50, engine oil 1 = 2%
Mineral oil: gasoline 32, engine oil 1 = 3%
Fuel
