www.chinowing.com
1. Pull wheel*2, corresponding to T5, T6
2. A1 main antenna, used for transmitting and receiving signal
3. A2 slave antenna, used for receiving signal
4. USB port, USB 3.0*2
5. The computer volume button, used to adjust the volume up or down
6. Power-on button of the computer and remote controller, used for powering on
the computer and remote controller or forced shutdown
7. Button for screen rotation, used for enabling or disabling the screen rotation
8. The computer shortcut setting key, used for setting the applications
9. The computer working indicator, used for indicating the computer’s working
status
10. Hard disk drive indicator, used for indicating the hard disk drive’s working
status
11. The computer battery power indicator, used for indicating low power of the
computer and charging status
12. Main joysticks, corresponding to T1, T2, T3 and T4
13. Buckles, used for strap connection
14. 6 buttons, corresponding to F1-F6
15. RC power indicators, one indicator stands for 25% battery power
16. Signal strength indicators, used for indicating communication signal strength
17. Tx data transmitting indicator, Tx continuously ON indicating in the
transmitting status
18. Rx data receiving indicator, Rx continuously ON indicating in the receiving
status
19. RC/computer charging port, adapter DC16V 4A
20. 4 buttons, corresponding to F7-F10
21. Battery jar lock catch
22. SIM/SD card slot, used for installing micro SIM card or micro SD card
