Chiayo Focus 505 series Manual de usuario
Taiwan Good Design
Taiwan Excellence
IC: 3563A-FOCUS505
IC: 3563A-SQ5016
IC : 35 63 A- SM 50 16
Portable sound system
Operation maunal
Focus 505
Focus 500
-1-
Congratulations and thank you for purchasing this all-in-one compact portable sound
system. To ensure a trouble-free operation, please read this manual thoroughly and fully
understand its controls and functions.
There are various versions of the Focus as below:
1. Focus Passive Speaker.(p.2)
2. Focus Active Speaker.(p.2)
3. Focus with Amplier.(p.3)
4. Focus with CD / USB Player.(p.3)
5. Focus with CD / USB Player & Digital Recorder.(p.4)
6. Focus with Digital Recorder.(p.4)
All the versions can be equipped with 1 or 2 wireless receiver module(s). The wireless
receiver module can be VHF, UHF or infrared(IR). The VHF or IR module is a xed crystal
single frequency type whereas the UHF module is a PLL synthesized type with 16 preset
frequencies (identied by external 16 channel rotary switch(s)) or crystal xed.
Conguration
All versions of Focus series comes equipped with the following:
1. A switch mode power supply.
2. One or two wireless microphones (except non-wireless versions).
Optional accessories
1. Carrying bag
2. Tripod stand
3. Wall bracket
4. UHF/Infrared transmitter charger
5. Focus active speaker / passive speaker
6. Wired microphone
Remark
Manufacturer reserves the rights to change the above combinations without prior notice.
-2-
Focus Active Speaker
1. Aux volume
2. Aux input
3. Battery low indicator
4. Charging indicator
5. DC in
6. Fuse
7. Power switch
8. Battery compartment release
Focus Passive Speaker
1. Audio input
2. Battery compartment release
1
2 2
1
2
3
45 6
8 8
7
-3-
Focus (Amplier version)
1. Mic volume control
2. Aux volume control
3. Wireless mic 1
4. Wireless mic 2
5. Bass control
6. Treble control
7. Voice priority
8. Mic input
9. Aux input
10. Aux output
11. External speaker
12. WR1 channel selector
13. WR2 channel selector
14. Battery low indicator
15. Charging indicator
16. DC in
17. Fuse
18. Power switch
19. Battery compartment release
Focus (CD / USB Player version)
1. LCD Display
2. Play/Pause
3. Stop
4. Skip
5. Eject
6. CD mode
7. USB mode
8. Folder skip
9. IR LED
10. USB input
11. Power/Volume control
1
1
9
9
3
3
2
2
4
4
5
5
7
7
6
6
8
8
11
11
1210
10
13
14
15 16 17
19 19
18
-4-
Focus (CD / USB Player & Digital Recorder version)
1. Play/Pause
2. Stop
3. SD/USB selector
4. Track number button "1"
5. Track number button "10"
6. Track number button "100"
7. A→B play section
8. Program/Repeat
9. Forward
10. Reverse
11. Folder selector
12. Volume control
13. USB 2.0 input
14. SD card input
15. Copy
16. Record
17. Infrared detector
18. Power on/off
19. Delete
20. LCD display
Focus (Digital Recorder version)
1
9
3 245
7
6
811
12
10
19
1415
18
17 13
20
16
-5-
Operating procedures
After unpacking the unit for the rst time, please charge the unit for about 4~5 hours before
any operation. This is absolutely necessary as the built-in rechargeable battery might have
been discharged naturally due to long shipment and storage time, even though it has been
fully charged in the factory prior to shipment.
To charge the battery, just plug in the DC end of the switch mode power supply into the DC
IN of the unit and charging will start automatically. The charging indicator LED ashes RED
during the charging process. When GREEN LED stays glowing, the battery is then fully
charged and operation could now be started.
To operate this portable sound unit, switch on the main POWER, which will glow GREEN.
However, the main POWER switch does NOT switch on the WR module, CD / USB player
and Digital Recorder as each of them has a dedicated Power / Volume control switch
indicated by WR1, WR2. CD/USB Player and Digital Recorder have individual power switch
on its panel. When the Charging / Battery Status Indicator glows RED, it means the built-in
rechargeable battery is weak and needs to be charged. While charging, the unit could also
be operated simultaneously.
Operating the built-in Wireless (WR) receiver modules
On the Focus control panel, there are two designated power switch / volume control knobs
for the built-in Wireless Receiver (WR). They are indicated by WR1 and WR2.
To use the 1st wireless microphone, switch on the WR1 power cum volume control switch,
Red LED next to it will glow. Switch on the corresponding transmitter (RF).
Rotate the volume control knob clockwise and amplied sound could be heard if voice is
spoken into the transmitter.
To use the 2nd wireless microphone, switch on WR2 power cum volume control switch and
repeat the same operation as above.
Operating the dynamic wired microphone.
To use a cable microphone, simply plug it into any MIC IN socket. Rotate the dedicated
volume control knob and master volume control, amplied sound could be heard from the
speaker when voice is spoken into the cable microphone.
Operation of system with CD / USB Player.
This operation is valid for version of Focus with built-in “CD / USB Player”.
To operate, rst turn on the Master power switch and then turn on the CD power cum
volume control switch a little until LED next to it glow. The LCD panel on the player will
be lighted up and operation is ready. To insert a CD, just push it into the CD slot and the
mechanism will suck it in automatically.
Rotate the Power cum Volume control knob to adjust the volume of the player. For Bass
and Treble setting, adjust the designated controls respectively. Clockwise direction to either
control is to boost and counterclockwise is to back off its level.
For more details, please refer to the explanation on “CD / USB Player “controls and
functions.
-6-
Operation of system with Digital Recorder.
This operation is valid for version of Focus with built-in “Digital Recorder “.
To operate, rst turn on the Master power switch and then press the designated power
button of this module. The LCD display will be lighted up and Volume setting can be
done by rotating the knob. For Bass and Treble setting, adjust the designated controls
respectively.
For more details, please refer to the explanation of “Digital Recorder “controls and
functions.
FCC Caution:
To assure continued compliance, any changes or modications not expressly approved
by the party responsible for compliance could avoid the user’s authority to operate this
equipment. (Example - use only shielded interface cables when connecting to computer or
peripheral devices.
This device complies with Part 15 of the FCC Rules and RSS-123 of Canada. Operation is
subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause
undesired operation.
-7-
Operating the CD / USB Player
To begin operation switch on the CD Power after the main power of Focus has been turned
on.
Keys Functions
PLAY/PAUSE When this key is pushed during CD stop, play will start after track
search.
When this key is pushed during CD is playing, it will be changed to
pause.
When this key is pushed during CD is pausing, it will be changed to
play.
STOP When CD is not stop, if this key is pushed then CD will stop.
CD When press this key will change to cd-mp3 mode.
USB When press this key will changed to USB mode.
SKIP+UP/CUE In stop mode:
Change the starting play track (le) during stop mode, cyclic to the
rst track, if it is in the last track.
In program entry mode:
Change to the next track(le) for program select .
In play mode, pause mode, program play mode, random play mode:
Single pressed, skip the playing track (le) to next track(le) for normal
play/pause mode, to next program index track(le) for program play/
pause mode, to next random track(le) for random play /pause mode.
Continue pressed , fast forward during play/pause when pressed more
than 0.7sec.
SKIP-DONW/REV In stop mode:
Change the starting play track (le) during stop mode, cyclic to the
last track, if it is in the rst track.
In program Entry mode:
Change to the previous track (le) for program select.
In play mode, pause mode, program play mode:
Single pressed, skip the playing track (le) to precious track (le) for
normal play/pause mode, to previous program index track (le) for
program play/pause mode.
Continue pressed, fast reverse during play/pause when pressed more
than 0.7sec.
FOLDER-UP In stop mode:
Skip the starting play folder to next folder during stop mode, cyclic to
the rst folder if it is in the last folder.
In program entry mode:
Change the le for program select to next folder’s rst le, cyclic to the
rst folder if it is in the last folder.
In normal play mode:
Skip the playing le to the next folder’s rst le.
-8-
FOLDER-DOWN In stop mode:
Skip the starting play folder to previous folder during stop mode, cyclic
to the last folder if it is in the rst folder.
In program entry mode:
Change the le for program select to previous folder’s rst le, cyclic
to the last folder if it is in the rst folder.
In normal play mode:
Skip the playing le to the previous folder’s rst le.
PLAY MODE In mp3 mode and in USB mode .
If this key is pushed, PLAY mode is changed cyclically shown below.
PLAY ALL RANDOM→REPEAT TRACK→REPEAT FOLDER→
REPEAT ALL→RANDOM REPEAT→PLAY ALL
IN CD mode If this key is pushed, PLAY mode is changed cyclically
shown below.
PLAY ALL RANDOM→REPEAT TRACK→REPEAT ALL→
RANDOM REPEAT→PLAY ALL.
EJECT When this key is pushed, door is moved out.
PROG Set to programming mode.
When programming mode, “stop” key is pushed then program is all
cleared.
MUTE When this key is pushed during CD is playing, the set will mute the
output. Pushing again can recovery the output.
POWER Power SW of the set.
ESP In CDDA mode, Press ”ESP” key, The ESP display lighted and the set
is in electronic anti-shock state. The electronic anti-shock time is about
40 seconds. Press “ESP” key again, cancel the ESP function.
FIND In MP3 mode : Press this key once FILE search mode changed .
Press this key twice ALBUM search mode changed. Long press this
key to display the track. Press twice to display ID3 TAG.
0~10 You can use these keys to select the track you want directly.
VOL.- When this key is pushed, the volume will decrease by 1dB per step,
the min. volume is 0dB.
VOL.+ When this key is pushed, the volume will increase by 1dB per step, the
max. volume is 30dB.
Caution: This player does not accept 8-cm diameter CD. User is advised to have the USB 2.0
formatted in “ FAT “ or “ FAT 32 “. The built-in USB 2.0 player can not be able to read the
MP3 les stored in your USB if it is not formatted by either “ FAT “ or “ FAT-32 “. To avoid
damage to the USB, remember to detach it only after switching off the player.
-9-
Operating the Digital Recorder Player
Features
- Recording through the Line-in recording directly to a USB or SD Card
- Offer USB and SD Card function of each replication.
- Recording format is most popular MP3 audio format.
- Accept the capacity of 128MB to 16G USB / SD Card / SDHC
- With a language learning function, can be broadcast repeatedly at designated areas
- Adjustable recording quality, provide choice of 44.1 KHz, 128 Kbps and 192Kbps.
- Able to store up to 99 folders, or 999 tracks in SD Card or USB
Easy to use
- Play through the LINE IN audio recording les into the directory folder simply select "REC"
- Play copied USB or SD Card copy les into the directory folder simply select "CPY"
- Direct delete function when plan single song
- Can copy single, multiple songs or whole folder
Operation and function of the use of panel description
POWER : Switching power on / off.
VOLUME: Volume control button, turning to adjust the volume
USB socket: To insert a USB storage device
SD CARD socket : To insert a SD CARD
100 / 10 / 1: The number buttons to select directory, or track.
- Button 1, indicating the single digit 1 to 9, press once to increase every 1 single digit.
- Button 10, indicating the 10-digit, press once to increase every 10-digit. If total tracks are
88, the LCD display will only show to “8”. Keep pressing will back to “0”.
- Button 100, indicating the 100-digit, press once to increase every 100-digits. If the total
tracks below the 100, the button has no effect.
FOLDER: Folder selection key and adjust the recording quality
-Select folder
Press FOLDER button, LCD screen display F, then REW or F. FWD button with the
numbers 0 to 9 button to select the directory . Double-click the Cancel catalog select, LCD
screen, "F" disappears
-Recording quality adjustment: Press FOLDER button more than 3 seconds can choose
the recording quality. Press REW or F. FWD key to select 44.1 KHz,128Kbps or 192Kbps
Recording
■REC: Recording function key, need to use this key to record through the Line-in channel
When USB and SD Card are both in the device
- Press the REC button. LCD display ashing to indicate will be recorded to USB or SD.
- Use USB / SD button to select the option to record to USB or SD card.
- Press REC to start to recording, LCD starts to ashing indicated that they are recording
- Press STOP button to stop recording.
When only single USB or SD Card in the device
- Press REC to begin recording, LCD starts to ash and indicating that they are recording,
Otros manuales para Focus 505 series
4
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Sistema de altavoces de Chiayo
Manuales populares de Sistema de altavoces de otras marcas
Sondpex
Sondpex Active Speaker System and Digital Music... Manual de usuario
JVC
JVC NX-PN7 Manual de usuario
Marshall Amplification
Marshall Amplification AR-DM61-BT Manual de usuario
Yamaha
Yamaha NX-A01 - Speaker Sys Manual de usuario
SE Audiotechnik
SE Audiotechnik I-LINE Manual de usuario
Gemini
Gemini WRX-843 Series Manual de usuario