Chatsworth Products Communications Module 16147-010 Guía del usuario

PRODUCT APPLICATION

Keypad Module (recommended) — Enter an

authorized access code on the Keypad Module to

open a handle. The Keypad Module can be placed

on or near the cabinets and can open any of the

cabinet handles in the system.

Communications Module (required) — Provides a single IP

addressable network connection for the Electronic ocking

System and is used to setup and configure the system.

Each Communications Module can support any

combination of up to 64 Electronic ock Control

Modules (512 handles, 256 cabinets), 64 Keypad

Modules and 64 Proximity Card Reader Modules. Control

access to equipment with computer terminals using the

included lock control software. Provide alarm outputs for

unauthorized entries. The software also keeps a log of

each access attempt and all configuration changes.

Electronic Lock Upgrade Kit (required)

— Replace the mechanical lock on the

cabinet’s swing handle with an electronic

solenoid that releases the spring-loaded

handle when the correct code is entered.

When the correct code is entered, the

handle springs open allowing the door to

be opened.

800-834-4969

[email protected]

www.chatsworth.com

Electronic Locking Sy tem

Electronic ock Upgrade Kit (2 per cabinet)

with Electronic ock Extension Cable

Electronic ock Control Module (8 handle)

Proximity Card Reader Module

Keypad Module

with Keypad Module Cable

Communications Module

Electronic Lock Control Module (required) —

Connects upgraded electronic locks to the

Electronic ocking System and controls the

solenoid that opens the cabinet handles.

Each Electronic ock Control Module

connects eight handles (four cabinets) to

the system. Each handle can have up to

five access codes and can be assigned to

24 user groups. The Electronic ock Control

Module also reports the status of the handle

(opened or closed).

Proximity Card Reader Module (optional) — Use with the

Keypad Module. The proximity card acts like a key replacing the

access code. The proximity card can be programmed with a

specific handle access code or with up to 24 user group codes to

open multiple cabinets. Proximity cards can also be programmed

to open handles a specific number of times and to expire at a

specific time and date.

Electronic Locking System For CPI Cabinets

Automate access control and monitoring in your data center, computer

room and network facilities with the Electronic ocking System.

• Automate data center cabinet access control and monitoring

• IP addressable system increases security

• Assign and program individual user ID access codes

• Access cabinets via a network-connected computer, keypad or

proximity cards

• Create a log entry for each access attempt and configuration change

• Monitor handle conditions — opened or closed

• Forward SNMP traps to designated computers during alarm conditions

• Quickly update the system configuration and users privileges

• Easily add modules as your network grows

Rear

View

PRODUCT APPLICATION SHEET

ORDERING INFORMATION

SOLUTION OVERVIEW:

• User specific accounts - assign each authorized user access to specific cabinets with an individual access code or proximity card

• Records each access attempt - the lock control software keeps a log with records of each access attempt and each configuration change

• Quick changes to access permissions - software allows the system administrator to add or remove authorized users and change access codes and

permissions quickly

• Create multiple user groups - the system administrator can associate users and latches by a group number to restrict access by service group, authorization

level, facility or region with the lock control software

• Remote access control over the network - the lock control software lets authorized users see the status of all latches and open door latches remotely

• Generates alarm outputs for unauthorized entries - the Communications Module has two alarm relay outputs that can be used to send SNMP traps to

designated computers, operate external devices or to connect to the CPI Remote Infrastructure Management (RIM-600) System to notify you if there is an

unauthorized entry

• Grows with your network - simply add modules as your network grows; a single network connection provides access to 256 cabinets (512 swing handles)

• Connect the Communications, Electronic ock Control and Proximity Card Reader Modules with RJ-45 patch cords; connect Keypad Modules with Keypad

Module Cables; connect Electronic ock Upgrade Kits and Electronic ock Control Modules with Electronic ock Extension Cables

Part Number Description S ipping Weig t

16147-050 Communications Module 5 lb (2.3 kg)

16147-010 Electronic ock Upgrade Kit for Enhanced SteelFrame Cabinet

for the Front or Rear Door (1/Door) 1 lb (0.5 kg)

16147-060 Electronic ock Upgrade Kit for TeraFrame™Cabinet System

with a Single Solid or Perforated Front Door (1/Door) 3 lb (1.4 kg)

16147-061 Electronic ock Upgrade Kit for TeraFrame Cabinet System with

a Single Solid Plexiglass Front Door (1/Door) 3 lb (1.4 kg)

16147-062

Electronic ock Upgrade Kit with Integrated Keypad Module

for a TeraFrame Cabinet with a Single Solid or

Perforated Front Door (1/Door)

4 lb (1.8 kg)

16147-063 Electronic ock Upgrade Kit for TeraFrame Cabinet System with

a Single or Double Solid or Perforated Rear Door (1/Door) 2 lb (0.9 kg)

16147-052 Electronic ock Control Module for 8 Swing Handles 5 lb (2.3 kg)

16147-008 Keypad Module with (1) Keypad Module Cable 1 lb (0.5 kg)

16147-054 Proximity Card Reader Module 5 lb (2.3 kg)

60070-007 Network Patch Cord, RJ-45, 7’ (2.1 m) 1 lb (0.5 kg)

60070-014 Network Patch Cord, RJ-45, 14’ (4.3 m) 1 lb (0.5 kg)

60070-025 Network Patch Cord, RJ-45, 25’ (7.6 m) 1 lb (0.5 kg)

16147-015 Electronic ock Extension Cable, 16’ (5 m) 1 lb (0.5 kg)

16147-016 Keypad Module Cable, 9’ (2.7 m) 1 lb (0.5 kg)

RECOMMENDED ACCESSORIES:

Part Number Description S ipping Weig t

60000-001 Remote Infrastructure Management (RIM-600)

System Host Module 14 lb (6.4 kg)

60052-002 Door Open/Closed Sensor 1 lb (0.5 kg)

60065-001 Axis®Network Camera 1 lb (0.5 kg)

60050-001 Dry Contact Bridge (NO/NC) 1 lb (0.5 kg)

60061-007 Motion Sensor, Passive Infrared 1 lb (0.5 kg)

All products quot d ar subj ct to availability bas d on manufacturing capacity and shipping dat s should b consid r d stimat s only. Whil

v ry ffort has b n mad to nsur th accuracy of all information, CPI do s not acc pt liability for any rrors or omissions and r s rv s th

right to chang information and d scriptions of list d s rvic s and products.

f d rally r gist r d trad marks of Chatsworth Products, Inc. Cub -iT Plus, Evolution, OnTrac, QuadraRack, Simply Effici nt and T raFram ar

trad marks of Chatsworth Products, Inc. All oth r trad marks b long to th ir r sp ctiv compani s. MKT-60020-355 R v.3 01/09

Not exactly w at you need?

For complete information visit

www.chatsworth.com/locks.

16147-050

16147-060

16147-052

16147-008

16147-054

60000-001

Note: Contact CPI Technical Support to configure TeraFrame Cabinets with electronic locks.

16147-062

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cerrar de Chatsworth Products

Chatsworth Products

Chatsworth Products ELS1000 Manual de usuario

Manuales populares de Cerrar de otras marcas

Magic

Magic 105 Manual de usuario

Gantner

Gantner GAT NET.Lock 7020 System Guía rápida

Wittkopp

Wittkopp Insys 7202 Manual de usuario

Dorma

Dorma Studio Classic Manual de usuario

Securam

Securam ECSL-601 Manual de usuario

Sudhaus

Sudhaus 3003 Manual de usuario

Safety 1st

Safety 1st 48517 Manual de usuario

Pado

Pado FDS-10 Manual de usuario

Esco

Esco systeQ Series Manual de usuario

COMPX

COMPX National D8951 Manual de usuario

secureo

secureo Key Box Manual de usuario

Stock Loks

Stock Loks C8713 Manual de usuario

COMPX

COMPX 1T-058 Manual del propietario

Auslock

Auslock T11 Manual de usuario

ELCOM

ELCOM 7205 Manual de usuario

Stealth SAFES

Stealth SAFES ShadowVault Manual de usuario

Knox

Knox KeySecure 5 Manual de usuario

Kwikset

Kwikset 48334/01 Manual de usuario