Channel Vision ST-3108 Manual de usuario

ST-3108 / ST-3078

IP Touch Screen Room Station

SETUP GUIDE

 
 
 
 
CATALOG 
 
PRODUCT FEATURES ..................................................................................................................................2 
SPECIFICATIONS .......................................................................................... Error! Bookmark not defined. 
PRE-NETWORK SETTINGS.......................................................................................................................4 
ACCESSING AND CONFIGURING THE USER INTERFACE .........................................................................7 
NETWORK SETTINGS ..............................................................................................................................8 
ROOM SETTINGS ....................................................................................................................................9 
1 Automatic Detection of Devices. ...................................................................................................10 
2 Custom Room Names and Contacts: .............................................................................................12 
2.1 Add Contacts...........................................................................................................................12 
VOIP SETTINGS:....................................................................................................................................15 
ADVANCED SETTINGS...........................................................................................................................16 
INTERNET SETTINGS.............................................................................................................................17 
DOWNLOAD 3rd Party APP’S in the Touch Screen Room Stations .......................................................18 
CHANGE DEFAULT ICONS on the FRONT SCREEN................................................................................25 
1 To Return Default Icons .................................................................................................................26 
 
 
 
 
 

PRODUCT FEATURES

1. Building Intercom Application:

- VOIP: support video call, monitor and VOIP communication

- Security: support 8-way zone alarm with 3 states, make the zone and scene

setup.

- Home: support RS-485 smart home extension.

- Contacts: android address book.

2. Operating system: Android 4.2.2.

SPECIFICATIONS

- Voltage: DC 12V

- Rated power: 6W

- Standby power consumption: 1.5W

- Display screen: 7'' / 10.2''

- Resolution: 800*480/ 1024*600

- Operating temperature: -10℃～+50

- Relative humidity: 20%～85%

- CPU: single-core 1GHz

multi-core 1GHz

- Memory: DDR3 512MB (single-core)

DDR3 1GB (multi-core)

- Flash: 4GB

- Max microSD card capacity: 32GB

FEATURES

MODEL: ST-3078

MODEL: ST-3108

microSD

1. PRE-NETWORK SETTINGS

-Connect your IP room station to your switch or router via cat5e or cat6, then launch the CVT

Upgrade Tool (This tool is on http://channelvision.com/support/product-support/firmware-software/).

Click on the search button to find the IP address of your door station. 192.168.1.230 by default.

- Verify your computer's LAN settings from a command prompt. The easiest way to get to a

command prompt on a Windows system is to press win+R on your keyboard. (Hold the windows

key down and then press R).

- After pressing the win+R key combination, you will type “cmd” and press OK to get to the command

prompt.

- Once In the command prompt you will type “ipconfig” and press enter to find the IP information of

your LAN (your IP address, Subnet mask, default Gateway).

- Make sure you write down your IP address, your network mask and your default gateway (router

address) so you can reference them later.

- Compare your IP address (pictured above) with the IP address of your room station (pictured

below). If the first three octets (192.168.1.x) of your computer match the first three octets

(192.168.1.x) of your room station you can proceed to step 4.

- If they don't match, you can refer to the “changing network settings” portion of this manual.

Default IP address of the ST-3078 is 192.168.1.230, and for the ST-3108 is 192.168.1.220.

Note: Do not proceed to step 3 until you have verified your computer and room station are on the same

network.

2. ACCESSING AND CONFIGURING THE USER INTERFACE

-Open a Web browser, type the IP address of your room station into the address bar at the top

and press enter to access the user interface. For ST-3108 the default IP is 192.168.1.220 and

for ST-3078 is 192.168.1.230

- Enter your user name and password to access the user interface. The default user name is “admin”

and default password is “123456”

3. NETWORK SETTINGS

DHCP: leave the DHCP box unchecked, we want to leave the room station on a static

address to access it later to make any necessary changes.

IP: enter an IP address for your room station to use in your network. (refer to pre-network settings info)

Mask: 255.255.255.0 The subnet mask of your network.

Gateway: 192.168.1.1 The IP address of your router.

DNS: 8.8.8.8 or enter the same DNS address that you are using on your local network (you can find the

DNS address your network is using by typing “ipconfig /all” into a command).

4. TOUCH SCREEN ROOM SETTINGS

Build: 1-99. (Must match SI-8000 device settings)

Unit: 1-99. (Must match SI-8000 device settings)

Floor: 2 digits, 11 is default: (Must match SI-8000 device settings)

Room: 2 digits. (If a particular configuration is needed, see sections 4.1 or 4.2.)

Device: Must start with 0-9 and not have 2 devices with the same number including mobile phones.

Sync: used to sync any additional room stations together to communicate with each other.

Server: when using management software for MDU’s otherwise this will be the router address.

Password: The password used to login to a management server.

For the multiple screens in the installation, we have 2 different options to intercommunicate with each

screen.

Must match

SI-8000 settings

4.1 Room Station Setup: Automatic Detection of Devices OPTION 1 quickest setup option

-We must configure at least 2 screens with this setting:

- Be certain that they have the same ‘Sync’ number so they could see each other on the network.

- Also, each device that is installed, must carry the same ‘Room No’, but in the ‘Device No’ the first

one of the devices in the installation will start with “0”, the second one with “1”, and so on. It means

this is a sequence device installation that also helps us with the incoming calls from the door station,

in the “Forward/ One by One” setting, so it will ring first in one device then on to the second one, etc.

- Go into the VoIP icon on the front screen, then to the Call icon:

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de intercomunicación de Channel Vision

Channel Vision

Channel Vision ST-3048W Manual de servicio

Channel Vision

Channel Vision SIK-XXXXA-XX Manual de usuario

Channel Vision

Channel Vision DP Series Manual de usuario

Channel Vision

Channel Vision DS3 series Manual de usuario

Channel Vision

Channel Vision DP-5xxxP Series Manual de usuario

Channel Vision

Channel Vision DP-XXXX Manual de usuario

Channel Vision

Channel Vision DP Series Manual de usuario

Channel Vision

Channel Vision IU-XXXX Manual de usuario

Channel Vision

Channel Vision SIM-8000 Series Manual de usuario

Channel Vision

Channel Vision DS3-0212 Manual de usuario

Channel Vision

Channel Vision DP-XXXX Manual de usuario

Channel Vision

Channel Vision SI Series Manual de usuario

Channel Vision

Channel Vision DP Series Manual de usuario

Channel Vision

Channel Vision DP-XXXX Manual de usuario

Channel Vision

Channel Vision SIM Series Manual de usuario

Channel Vision

Channel Vision DS3-XXXX Manual de usuario

Channel Vision

Channel Vision IU Series Manual de usuario

Channel Vision

Channel Vision IU-XXXXP8 Manual de usuario

Channel Vision

Channel Vision ST-2000 Manual de usuario

Channel Vision

Channel Vision DSK-XXXXC Manual de usuario

Channel Vision

Channel Vision SI-8000 Manual de usuario

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario