Champion SD-10 Manual de usuario

OPTIONS

(2M) 08/03 Printed in U.S.A.

DG004

Pot, Pan And Utensil Washer

SD-10

SD-10 UTENSIL WASHER

STANDARD FEATURES

• Heavy-duty stainless steel construction

• Front-loading, split door design

• Separate wash and rinse tanks

• External pre-rinse and wash down hose

• Self-contained water heating

• Moisture resistant control gauges

• Recirculating wash water

• Maintenance free hub system

• Adjustable wash and rinse cycles

• Easy to remove, filter basket

• Digital Control & Information Center

• Flexible racking system

• Electric, steam or infrared gas water heating

• One-year parts and labor warranty

• Automatic fill

• Rinse tank and booster heater

• Stainless steel utensil rack with a hold-down

lid and one insert

Project______________________________________________

Item No._____________________________________________

Quantity_____________________________________________

Champion Industries, Inc.

P. O. Box 4149, Winston-Salem, NC 27115

Tel: 336/661-1556 Fax: 336/661-1979

www.championindustries.com

Additional Lift Door and Split Door Models:

LD-10 SD-36 LD-20LD-36 SD-20

Pot, Pan And

Utensil Washer

SD-10

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com

SPECIFICATIONS

Machine Construction

12, 14, & 16 gauge Stainless steel.

Heliarc welded seams.

Door

Stainless Steel, split door design. Top half

rises, lower folds down to load/unload table.

Rotating Wash, Hub &

Spray Arm Assembly

Water driven, STAINLESS STEEL spray

arm assembly with STAINLESS Steel

jets, removable end caps and hand

operated quick release mechanism for

easy cleaning and reassembly. Mounted

on STAINLESS STEEL base.

Filter

Perforated, removable, Stainless Steel

basket.

Water Pump

5 H.P., 208/240 or 440/480 volt, 1 phase

or 3 phase, 60 cycle with output of 100

g.p.m. at 35 to 45 P.S.I.

Digital Control & Information

Center

110 volt control circuit, push pad operation

“Power On”, “Stop” and “Short, Medium,

or Long Wash Cycles”. Digital display

indicates “Time Remaining” for cycle. LED’s

indicate wash, rinse & unload functions.

Buzzer provides indication to unload. A

pre-programmed circuit board controller

allows push pad to be used as a “Diagnostic

Center”. Displays “Error Codes” for

troubleshooting.

Gauges

Wash temperature, rinse temperature,

wash jet pressure. Special moisture

resistant design.

Wash Tank

Stainless Steel with electric, infrared

gas, steam or steam coil heating,

thermostatically controlled, low water

protected, sloped to drain with a

25-gallon capacity.

Rinse Tank

Stainless Steel with electric, infrared gas

or steam coil booster heater provides

180°/190° hot sanitizing rinse.

Racks

Stainless Steel rod, built to match specific

washing requirements.

SD-10 UTENSIL WASHER

SPECIFICATIONS

MODEL SD-10

POT, PAN & UTENSIL WASHER

WASHER

CABINET

DOOR

RECIRCULATING

WASH TANK

FILTER

WASH TANK

FILL VALVE

WASH TANK

DRAIN VALVE

WASH PUMP

ROTATING WASH

HUB & SPRAY ARM

ASSEMBLY

SANITIZING

RINSE TANK

RINSE SUPPLY

VALVE

FINAL RINSE

PIPING

Automatic washing machine designed to wash all pots, pans and utensils commonly used

in baking and cooking operations.

36" wide x 36" deep x 71 1/8" high. Clearance height: 87 5/8" (96 1/8" with optional infrared

gas heated rinse tank). Door opening: 26" wide x 28 1/2" high. Wash chamber: 24 3/8" wide

x 27 3/8" deep x 28 1/2" high. Constructed of #12, #14 and #16 gauge, type 304 #3 finish

STAINLESS STEEL. All seams tig-welded, cleaned inside, cleaned and buffed outside.

Front-loading, hinged door design for easy loading and unloading. The top half of the

door system rises while the lower half folds down to create a space saving drain table.

Door is interlocked with limit switch to prevent machine operation while door is open.

Door construction: 16 gauge, type 304 #3 finish, STAINLESS STEEL.

Heated by two (2) 6 kW 208/240 at 480 volt electric immersion heaters, thermostatically

controlled wash temperature and low water protection system. 25 gallons, 14 gauge

STAINLESS STEEL, sloped to drain. Infrared gas and steam heating options available.

Perforated, STAINLESS STEEL basket type. Double filter system for increased effectiveness

and easy cleaning without emptying wash tank.

Size 1/2" brass material, solenoid type, automatic.

Size 1-1/4" brass material, gate type for manual or electrically operated ball valve for

automatic option.

Wash pump with 5 H.P. ODP motor, (optional TEFC or wash down duty motors available)

208/240 or 480 volt, 3 phase or 1 phase, 60 cycle. Rated for 100 gallons per minute at

35 to 45 PSI. Mounted on #12 gauge STAINLESS STEEL formed channel base. Close

coupled centrifugal pump, bronze fitted with cast iron casing. Optional STAINLESS

STEEL wet end available.

Water driven, STAINLESS STEEL spray arm assembly with STAINLESS STEEL jets,

removable end caps and hand operated quick release mechanism for easy cleaning and

reassembly. Mounted on STAINLESS STEEL base.

STAINLESS STEEL, 6 gallon capacity, with one 6 Kw 208/240 or 480 volt electric booster

heater to provide 180°/190°F hot sanitizing rinse. Uses 2.8 gallons per 22 second cycle.

Infrared gas and steam coil heating options available.

Size 1/2" brass material, solenoid type, automatic.

Type 304 STAINLESS STEEL tubing with brass compression fittings and brass or

optional STAINLESS STEEL full cone rinse jets.

Rev: 8/03

CONTROL AND

INFORMATION

CENTER

WASH DOWN

SPRAY HOSE

STEAM

EXHAUST VENT

OPTIONAL

EXHAUST FAN

ELECTRIC

ENCLOSURE

RACKS

CONNECTIONS

WEIGHT

SERVICES

120 volt control circuit with push pad operation of “POWER ON,” “STOP” and “SHORT,

MEDIUM or LONG WASH CYCLES.” A digital display indicates “TIME REMAINING” for

each cycle. LED’s indicate wash, rinse and unload functions. A buzzer is also included to

provide an audible indication of time to unload. A pre-programmed circuit board allows the

push pad to be used as a “DIAGNOSTIC CENTER” by displaying “ERROR CODES” for ease

of troubleshooting. Moisture resistant gauges measure temperature and pressure for recirculated

wash and final rinse. NOTE: Optional NEMA 4X STAINLESS STEEL panel with push button

control and internal adjustable timers is available in lieu of digital push pad operation.

Externally mounted spray hose with insulated handle for pre-rinse of heavily soiled items

and easy cleaning and maintenance of machine.

Steam exhaust vent 6-5/8" I.D., consisting of 16 gauge rolled collar for PVC pipe

connection bolted to the top of the machine. Machine pre-wired with control timer for

the addition of a fan.

Side-mounted exhaust fan constructed for moisture laden air or other air stream

contaminants. Maximum temperature 250°F, 250 CFM @ 3/4" static pressure.

1/10 Hp, 115 volt motor, 1550 RPM.

Electrical control panel is NEMA 12 STAINLESS STEEL or optional NEMA 4X

STAINLESS STEEL with Square “D” components.

Customized to hold your specific items. Standard bakery racks include utensil rack with

hold-down lid and bun/sheet pan insert designed to hold ten pans, constructed of

STAINLESS STEEL rod, mig welded.

Water Inlet: 120°F, 3/4" NPT

Water Drain and Overflow: 1-1/4" NPT

Electrical: Two point connection through knock out on electrical enclosure.

Steam Heating Option: 1/2" NPT

Steam Condensate: 1/2" NPT

Natural or Propane Gas Heating Option: 1/2" NPT, 14" W.C. maximum inlet pressure.

Crated: 800 lbs. Uncrated: 600 lbs.

NOTE: All weights are approximate. Weights will vary depending on the number of

options included with the machine.

120 Volt -1 phase, 5 running amps, 15 amp service, plus one of the following:

CERTIFICATIONS UL and UL Sanitation listed (all). CUL Listed (electric and steam only).

SD-10 (8/03)

1Steam Supply: Consumption: 64 lbs./hr. @ 15 psi minimum

2Gas Supply: Consumption: 60,000 BTU/hr. @ 1/2 lb. pressure maximum

Running Amps

Elec. Spec.

208 Volt

3 phase 64

240 Volt

3 phase 56

480 Volt

3 phase 28

Electric Wash

Electric Booster

Steam Wash1

Steam Booster

Infrared Gas Wash2

Infrared Gas Booster

Tabla de contenidos

Otros manuales de Lavavajillas de Champion

Champion

Champion Model 120 HDPW Manual de usuario

Champion

Champion Model 66 WSPW Gas Manual de usuario

Champion

Champion Model 44 Manual de usuario

Champion

Champion Model 84 Manual de usuario

Champion

Champion PP-28 Corner Manual de usuario

Champion

Champion DH6000T-VHR Guía de configuración

Champion

Champion UTC-6 Manual de usuario

Champion

Champion CTD-1800H Manual de usuario

Champion

Champion Model 66 LTPW Manual de usuario

Champion

Champion TUW Manual de usuario

Champion

Champion Model 100 HDPW Manual de usuario

Champion

Champion USN-10 Manual de usuario

Champion

Champion Model 66 DRWSPW Manual de usuario

Champion

Champion DH6000T-VHR Manual de usuario

Champion

Champion UH-170B Manual de usuario

Champion

Champion CG6 Manual de usuario

Champion

Champion LD-20 Manual de usuario

Champion

Champion LD-10 Manual de usuario

Champion

Champion DH-1000 Manual de usuario

Champion

Champion USN-10 Manual de usuario

Champion

Champion EUCC4 Manual de usuario

Champion

Champion EUCC Series Manual de usuario

Champion

Champion IDH-200 Manual de usuario

Champion

Champion MODEL 2554 Manual de usuario

Manuales populares de Lavavajillas de otras marcas

Electrolux

Electrolux ESI5211LOX Manual de usuario

KitchenAid

KitchenAid KUDB230B Manual de usuario

Brandt

Brandt BDJ424DB Manual de usuario

Asko

Asko DSD767UXXL.AU Manual de usuario

Beko

Beko DFN26210W Manual de usuario

NEFF

NEFF S153ITX00E Hoja de especificaciones

Midea

Midea SV 4.45 wi Manual de usuario

LG LDF7932 Manual de usuario

Gorenje

Gorenje GV63214 Manual de usuario

Hotpoint

Hotpoint HDA1100ZWH Manual de servicio

Blomberg

Blomberg LDFN2240W Manual de usuario

AEG

AEG FFB83836PM Manual de usuario

Cylinda

Cylinda DM3220RFD Manual de usuario

Atag

Atag DW8214MB Manual de usuario

GE GLD8000 Series Manual de usuario

Siemens

Siemens SN23HI02KE Hoja de especificaciones

Omega

Omega ODW717X Manual de usuario

BORETTI

BORETTI BVW-683 Manual de usuario