Chamberlain B2202 Manual de usuario

Easy step-by-step

interactive 3D instructions

for this product can be found in

DOWNLOAD THE FREE APP

Available on most iOS and Android Devices

AFTER YOUR ASSEMBLY WITH BILT,

DOWNLOAD THE myQ® APP

Installation Manual Inside

Installation Manual

Belt Drive Garage Door Opener

Models B2202 • B2212T • B2405 • B4505T

FOR RESIDENTIAL USE ONLY

PREǫPROGRAMMED REMOTE

CONTROL INCLUDED

To register your garage door opener to receive

updates and offers from Chamberlain, visit

chamberlain.registria.com or use the icon below:

www.chamberlain.com

1. Take a photo of the camera icon including

the points ( ).

2. Send it in by texting the photo to 71403 (US).

• Please read this manual and the enclosed safety materials carefully!

• Fasten the manual near the garage door after installation.

• The door WILL NOT CLOSE unless the Protector System® is connected and properly aligned.

• Periodic checks of the garage door opener are required to ensure safe operation.

• The model number label is located on the left side panel of your garage door opener.

• This garage door opener is compatible with myQ® and Security+2.0® accessories.

• DO NOT install on a one-piece door if using devices or features providing unattended close. Unattended

devices and features are to be used ONLY with sectional doors.

Contents

Preparation 5

Assembly 9

Installation 14

Install the Door Control 24

Install the Protector System® 27

Connect Power 31

Adjustments 33

Battery Backup 36

myQ® App Control 37

Connect With Your Smartphone 37

Operation 38

Using your Garage Door Opener 38

Using your Door Control 39

Remote Control and Keyless Entry 41

HomeLink® 41

Erase the Memory 42

To Open the Door Manually 42

Maintenance 43

Troubleshooting 44

Warranty 46

Automatic Garage Door Opener Safety & Maintenance Guide 47

Repair Parts 49

Rail Assembly Parts 49

Installation Parts 49

Models B2202 and B2212T 50

Models B2405 and B4505T 51

Safety Symbol and Signal Word Review

This garage door opener has been designed and tested to offer safe service provided it is installed, operated,

maintained and tested in strict accordance with the instructions and warnings contained in this manual.

Mechanical

Electrical

When you see these Safety Symbols and Signal Words on the following pages, they will alert you to the

possibility of serious injury or death if you do not comply with the warnings that accompany them. The

hazard may come from something mechanical or from electric shock. Read the warnings carefully.

When you see this Signal Word on the following pages, it will alert you to the possibility of damage to your

garage door and/or the garage door opener if you do not comply with the cautionary statements that

accompany it. Read them carefully.

WARNING: This product can expose you to chemicals including lead, which are known to the State of

California to cause cancer or birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

Unattended Operation

The Timer-to-Close (TTC) feature, the myQ® App, and myQ® Garage Door and Gate Monitor are examples of

unattended close and are to be used ONLY with sectional doors. Any device or feature that allows the door to

close without being in the line of sight of the door is considered unattended close. The Timer-to-Close (TTC)

feature, the myQ® App, and any other myQ® devices are to be used ONLY with sectional doors.

The images throughout this manual are for reference only and your product may

look different.

Check the Door

To prevent possible SERIOUSINJURYor DEATH:

lALWAYS call a trained door systems technician if garage door binds, sticks, or is out of balance. An

unbalanced garage door may NOT reverse when required.

lNEVER try to loosen, move or adjust garage door, door springs, cables, pulleys, brackets or their

hardware, ALLof which are under EXTREME tension.

lDisable ALLlocks and remove ALLropes connected to garage door BEFORE installation and operating

garage door opener to avoid entanglement.

lDO NOT install on a one-piece door if using devices or features providing unattended close.

Unattended devices and features are to be used ONLY with sectional doors.

To prevent damage to garage door and opener:

lALWAYS disable locks BEFORE installing and operating the opener.

lONLY operate garage door opener at 120V, 60Hz to avoid malfunction and damage.

Before you begin:

1. Disable locks and remove any ropes connected to the garage door.

2. Lift the door halfway up. Release the door. If balanced, it should stay in place, supported entirely by its

springs.

3. Raise and lower the door to check for binding or sticking. If your door binds, sticks, or is out of balance,

call a trained door systems technician.

4. Check the seal on the bottom of the door. Any gap between the floor and the bottom of the door must

not exceed 1/4" (6 mm). Otherwise, the safety reversal system may not work properly.

5. The opener should be installed above the center of the door. If there is a torsion spring or center

bearing plate in the way of the header bracket, it may be installed within 4feet (1.2 m) to the left or

right of the door center. See page 15.

Torsion

Spring Extension

Spring

Before You Connect with Your Smartphone

Monitor and control your garage door from anywhere using the myQ® App. You will need a router with Wi-Fi®

and a smartphone or other mobile device. Make sure your mobile device is connected to your Wi-Fi® network.

Hold your mobile device in the place where your garage door opener will be installed and check the Wi-Fi®

signal strength.

Wi-Fi signal is weak.

The garage door opener will likely connect to your Wi-Fi

network. If not, try one of the options below.

No Wi-Fi signal. Try one of the following:

• Move your router closer to the garage door opener to

minimize interference from walls and other objects

• Buy a Wi-Fi range extender

Check Signal Strength. If you see:

Wi-Fi signal is strong. You’re all set!

Install your new garage door opener.

Visit support.chamberlaingroup.com for more details.

See myQ® App Control page 37 to connect your garage door opener to your Wi-Fi® network.

Preparation

Tools Needed

3/16

7/16

1/2

5/32

5/16

9/16

1/4

7/16

Additional Items You May Need:

Survey your garage area to see if you will need any of the following items:

l(2) 2X4 Pieces of wood : May be used to fasten the header bracket to the structural supports. Also

used to position the garage door opener during installation and for testing the safety reversing

sensors.

lSupport bracket and fastening hardware: Must be used if you have a finished ceiling in your garage.

Support Brackets

Hardware x2 (each)

lExtension brackets (Model 041A5281-1) or wood blocks: Depending upon garage construction,

extension brackets or wood blocks may be needed to install the safety reversing sensor.

Extension Brackets –Ê041A5281-1

Lag screws x4 Lag screws x12

Wood Blocks

lFastening hardware: Alternate floor mounting of the safety reversing sensor will require hardware not

provided.

lDoor reinforcement: Required if you have a lightweight steel, aluminum, fiberglass or glass panel door.

lRail extension kit: Required if your garage door is more than 7 feet (2.13 m) high.

Preparation

Carton Inventory

Save the carton and packing material until the installation and adjustment is complete. Instructions for the

accessories will be attached to the accessory and are not included in this manual. The images throughout this

manual are for reference only and your product may look different.

1. Header bracket

2. Pulley

3. Door bracket

4. Curved door arm

5. Straight door arm

(Packaged inside front rail section)

6. Trolley

7. Emergency release rope and handle

8. Rail (1 front and 4 center sections)

9. Hanging brackets (2)

(Packaged inside the front rail section)

10. Garage door opener (motor unit)

11. Sprocket cover and screws

12. “U” bracket

13. Belt

14. The Protector System®

Safety reversing sensors with 2 conductor white and white/black wire attached: sending sensor (1),

receiving sensor (1), and safety sensor brackets (2)

15. Battery Backup - Model B2212T

16. Remote control

17. Wireless keypad - Models B2405 and B4505T

18. Push Button Door Control - Models B2202 and B2212T

Multi-Function Control Panel - Model B2405

Motion Detecting Control Panel - Model B4505

19. White and red/white wire

20. Installation manual and all warning labels

See Hardware page 8.

Go to chamberlain.com for replacement or additional accessories:

3-button remote control model 953EV-P2

Wireless keypad model 940EV-P2

9 x2

14 x2

8 x1

8 x4

14 x1

19 20

Preparation

Hardware

ASSEMBLY INSTALLATION

Clevis Pin 5/16"x1-1/2"

Ring

Fastener (3)

Hex Bolt 5/16"-18x7/8" (4)

Self-Threading Screw

1/4"-14x5/8" (2)

Clevis Pin 5/16"x1" Clevis Pin 5/16"x1-1/4"

Hex Screw 10-24 (2) Wing Nut (2)

Lag Screw 5/16"-9x1-5/8" (4)

Hex Screw #8x3/8" (3)

(packed with the

sprocket cover)

Bolt 1/4"-20x1-3/4"

Lock Nut

1/4"-20

Bolt

Nut 3/8"

Lock Washer 3/8"

Master Link

Threaded

Shaft with

Spring

Trolley Nut

Lock Washer

5/16"-18 (4)

Nut

5/16"-18 (4)

DOOR CONTROL

Insulated Staples

(Not Shown)

Screw 6ABx1" (2)

Screw

6ABx1-1/2" (2)

Drywall Anchors (2)

Models B2405 and B4505T

Models B2202 and B2212T

Drywall

Anchors (2)

Screw 6-32x1" (2)

Preparation

Assembly

STEP 1 Assemble the Rail and Install the Trolley

To prevent INJURY from pinching, keep hands and fingers away from the joints while assembling the rail.

To avoid installation difficulties, do not run the garage door opener until instructed to do so.

The front rail has a cut out “window” at the door end. The rail tab MUST be on top of the rail when assembled.

1. Remove the straight door arm and hanging bracket packaged inside the front rail and set aside for

Installation Step 5 and 9. NOTE: To prevent INJURY while unpacking the rail carefully remove the

straight door arm stored within the rail section.

2. Align the rail sections on a flat surface as shown and slide the tapered ends into the larger ones. Tabs

along the side will lock into place.

3. Place the motor unit on packing material to protect the cover, and rest the back end of the rail on top.

For convenience, put a support under the front end of the rail.

4. As a temporary stop, insert a screwdriver into the hole in the second rail section from the motor unit,

as shown.

5. Check to be sure there are 4 plastic wear pads inside the inner trolley. If they became loose during

shipping, check all packing material. Snap them back into position as shown.

6. Slide the trolley assembly toward the screwdriver as shown.

7. Slide the rail onto the “U” bracket, until it reaches all the stops on the top and sides of the “U” bracket.

Wear Pads

Front Rail Section

(TO DOOR)

“U” Bracket

(TO MOTOR UNIT)

Trolley

Rail Tab

On Top

Slide to stops

on top and sides

of “U” bracket

Screwdriver

Assembly

STEP 2 Fasten the Rail to the Motor Unit

To avoid SERIOUS damage to garage door opener, use ONLY those bolts/fasteners mounted in the top of

the opener.

1. Insert a 1/4"-20 x 1-3/4" bolt into the cover protection bolt hole on the back end of the rail as shown.

Tighten securely with a 1/4"-20 lock nut. DO NOT overtighten.

2. Remove the bolts from the top of the motor unit.

3. Use the carton to support the front end of the rail.

4. Place the “U” bracket, flat side down onto the motor unit and align the bracket holes with the bolt

holes.

5. Fasten the “U” bracket with the previously removed bolts; DO NOT use any power tools. The use of power

tools may permanently damage the garage door opener.

Bolt

1/4"-20x1-3/4"

Lock Nut

1/4"-20

HARDWARE

Bolts (Mounted in the

garage door opener)

Bolt

Lock Nut

Cover Protection

Bolt Hole

“U” Bracket

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Abridor de puerta de Chamberlain

Chamberlain

Chamberlain RSW12UL Guía de inicio rápido

Chamberlain

Chamberlain LiftMaster Professional ART300K Manual de usuario

Chamberlain

Chamberlain Motorlift HC260ML Manual de usuario

Chamberlain

Chamberlain 1000 Series Manual de usuario

Chamberlain

Chamberlain Elite RSW12V Manual de usuario

Chamberlain

Chamberlain LiftMaster LA412 Manual de usuario

Chamberlain

Chamberlain IHSL24UL Manual de usuario

Chamberlain

Chamberlain LiftMaster Professional SW470 Manual de usuario

Chamberlain

Chamberlain MotorLift 710EML Manual de usuario

Chamberlain

Chamberlain MyQ Smart Garage Hub Manual de usuario

Chamberlain

Chamberlain MIRACLE-1 Elite Series Manual de usuario

Chamberlain

Chamberlain LiftMaster PROFESSIONAL LYN300 Series Manual de usuario

Chamberlain

Chamberlain LiftMaster Professional SL585GL Manual de usuario

Chamberlain

Chamberlain Elite SL3000 Manual de usuario

Chamberlain

Chamberlain Elite SL3000UL Instrucciones de instalación y funcionamiento

Chamberlain

Chamberlain MEGA ARM / MEGA ARM TOWER Manual

Chamberlain

Chamberlain TC1000 Manual de usuario

Chamberlain

Chamberlain RSW12UL Manual de usuario

Chamberlain

Chamberlain LYN300 Series Manual de usuario

Chamberlain

Chamberlain SLY300-24 Manual de usuario

Chamberlain

Chamberlain SL 1000-B3 Manual de usuario

Chamberlain

Chamberlain SL 1000-B1 Manual de usuario

Chamberlain

Chamberlain SCS200 Manual de usuario

Chamberlain

Chamberlain CSL24UL Manual de usuario

Manuales populares de Abridor de puerta de otras marcas

Elite

Elite CSW200UL Manual de usuario

CAME

CAME FROG-PM4 Manual de usuario

SOMFY

SOMFY FX230 Manual de usuario

Aprimatic

Aprimatic ONDA 500 Manual de usuario

Turnstiles

Turnstiles FSW 900 Manual de usuario

Erreka

Erreka BUL BL33 Instrucciones de funcionamiento

Erreka

Erreka VULCAN S Manual de usuario

Beninca

Beninca R1-2 WBV Manual de usuario

Erreka

Erreka VULCAN D Manual de usuario

Motorline professional

Motorline professional FORT Manual de instrucciones

Beninca

Beninca BOB5024 Manual de usuario

AGA

AGA GATEMASTER 900 HD Manual de usuario

SOMFY

SOMFY Dexxo RTS Pro Manual de usuario

Cardin

Cardin BL Series Manual de usuario

Westfalia

Westfalia 85 27 06 Manual de usuario

CAME

CAME F500 Manual de usuario

Extel

Extel VERA Manual de usuario

Comunello Automation

Comunello Automation ABACUS 220 Manual de usuario