CESVA TA120 Manual de usuario
TA120
Noise sensor
USER GUIDE
M_TA120_v0028_20211020_EN
1
Since its beginnings in Barcelona in 1969, has been devoted to
manufacturing sound equipment and instrumentation through research,
development and innovation, and by registering its own patents.
We belong to national and international committees for the establishment and
revision of standards and regulations.
has a fast and efficient distribution network in over 40 countries
around the world.
We offer our customers an after-sales service to ensure the long life of our
instruments. Periodic tests and calibration services are also available.
Our website is the focal point for finding information on our products, requesting
no-obligation quotes, downloading software, contacting us andbeing keptupdated
about all the training events and exhibitions we are present at on a regular basis.
Taking care of our customers and listeningto what they tell us means we are closer
to them and are able to offer the measurement solution thatfully meets their needs.
2 Contents
1. Equipment and literature 4
2. General device description 5
2.1 TA120 noise sensor 5
2.2 Main features of TA120 sensor 5
2.3 Device components 6
2.4 SI040 - CESVA Sensor Manager Software 8
3. Installing TA120 sensor 9
3.1 Steps 9
3.2 Cable gland inputs 11
4. TA120 communication for data transmission 13
4.1 Ethernet 13
4.2 Wi-Fi* (WF120 Optional module) 14
4.3 Modem 3G/GPRS* (MR123 Optional module) 14
4.4 Current Loop 4-20mA* (CL120 Optional module) 15
4.4.1 Description of a 4-20mA current loop circuit 16
5. TA120 sensor power 17
5.1 Mains 17
5.2 12VDC Input 18
5.3 PoE (Power Over Ethernet) 18
5.4 BA120/BA127 battery* 19
5.5 PS120 Solar Panel kit 20
6. Acoustic verification 21
6.1 Remove the front cover and outdoor kit TK120 21
6.2 Connecting the PC to the sensor TA120 22
6.3 Place the calibrator 24
6.4 Check the setting 25
6.5 Close and secure the sensor 26
7. Maintenance 28
8. Technical specifications 30
8.1 NOISE MEASUREMENT ACCORDING TO IEC 61672-1 30
8.2 MICROPHONE 30
Contents
Contents 3
8.3 WARM-UP TIME 31
8.4 PROTECTION AGAINST EXTERNAL AGENTS 31
8.5 CONNECTIVITY 31
8.6 OPTIONAL CONNECTIVITY 31
8.7 TRANSMISSION PROTOCOLS 31
8.8 REMOTE CONTROL 32
8.9 POWER 32
8.10 ENVIRONMENTAL CRITERIA 32
8.11 DIMENSIONS AND WEIGHT 33
8.12 MARKING 33
8.13 OPTIONS* 33
4 Chapter 1 Equipment and literature
The first step is to check that all the equipment and literature supplied with the
device is there:
Material included:
•Noise sensor TA120, composedby its centralbody, and an outdoor kittoprotect
the microphome.
•USB cable type B.
•Connectors for net mains cable and 12VDC and Ethernet communication cable.
•Cap for input cable gland.
Literature included:
•TA120 noise sensor user’s manual.
•Warranty.
Should any of these elements be missing, please contact your official distributor.
Equipment and literature
1. Equipment and literature
1
Chapter 2 General device description 5
This chapter provides a general description of the TA120 noise sensor. This
description will introduce you to all the possibilities offered by the TA120 and its
main features. It will also help you to identify the various components of the device.
2.1 TA120 noise sensor
The TA120 sensor is the solution for monitoring noise levels of infrastructures and
activities. The TA120 brings in a small size equipment, the Class 1 sound level
meter precision, the maximum protection of TK200 a professional outdoorkit (rain,
snow, wind, dust, birds, IP65) and full connectivity with open source platforms and
industrial protocols.
2.2 Main features of TA120 sensor
The most important features of TA120 sensor are as follows:
•Class 1 precision sensor according to IEC 61672-1.
•Protection against external agents with outdoor kit TK120: wind, rain, birds.
Maintains Class 1. IP65 Protection.
•Can be fully integrated into different open source platforms for sensors
connectivity.
•Light weighted small sized and easy to install in street lights, marquees,
billboards, shelters, kiosks and advertising posts.
•Powered by mains, POE (Power over Ethernet), 12 VDC (optional PS120 Solar
panel kit, external batteries), public lighting network with optional BA120 daily
backup battery*.
•Continuous measurement 24 hours / 7 days a week.
•Minimum annual maintenance. The materials used in manufacturing the TA120
ensure a long life.
•Removable outdoor kit for quick verification and adjustment with an acoustic
calibrator (IEC 60942).
•Communication by Ethernet (RJ45) or other options: 3G/GPRS Modem, Wi-Fi,
Current loop (4-20 mA loop).
General device description
2. General device description
2
6 Chapter 2 General device description
2.3 Device components
1. TK120 Outdoor Kit · Responsible for protecting the microphone and
preamplifier of possible meteorological factors: wind, snow, rain, etc.
2. Screws ·4 screews to close the front cover of the main body [3].
3. Main body · Maintains the IP65 when it is closed. Inside contains the elements
which are described between points [5] and [18].
4. Gland cable input for TA120 communication.
5. Gland cable input for TA120 supply.
6. LED ON indicator · It indicates whether the device is supplied.
7. LED SERVER indicator · It indicates the connection with the server.
8. USB connector · Type B connector for digital communication with a PC.
Compliant with USB rev. 2.0.
9. LAN connector for Ethernet connection.
10. Connector for 4-20mA current loop / Slot for SIM card.
11. Marks · CE mark (European conformity mark) and WEEE mark (Indicates the
separate collection of electrical/electronic appliances.).
12. POWER ON/OFF switch · To turn on and turn off the TA120 sensor.
13. Connector to connect the battery* optional BA120/BA127.
14. Equipment information ·This area displays the serial number of the sensor
and also its MAC address.
15. Battery support optional BA120/BA127.
16. Mains power connector ·100-240V 50/60Hz.
17. 12VDC power connector ·Power through solar panels and 12V external
batteries and PS120 solar panel kit (BA120 battery* required).
18. Information of power connectors [16] and [17].
Chapter 2 General device description 7
8 Chapter 2 General device description
2.4 SI040 - CESVA Sensor Manager Software
CESVA Sensor Manager is the software to verify and set the TA120 noise
sensor. In order to communicate with the sensor, two software applications
should be installed:
1. Install the drivers package with the CESVA USB Drivers software,
version 1.01 or later.
2. Install the CESVA Sensor Manager software.
If you already have an older version of CESVA Sensor Manager or CESVA USB
Driver installed in your computer, first uninstall the old version before installing
the new one.
NOTE: Download the latest versions of CESVA Sensor Manager and CESVA
USB Drivers from (www.cesva.com), you will find these softwares
in the support section of the TA120 sensor. This will ensure you are installing
the latest versions.
Otros manuales para TA120
2
Tabla de contenidos
Otros manuales de Accesorios de CESVA
