cecotec FORCESILENCE 1010 EXTREMECONNECTED Manual de usuario
Instruction manual
FORCESILENCE 1010/1020 EXTREMECONNECTED
Stand fan
INDEX
1. Parts and components
2. Safety instructions
3. Product assembly
4. Operation
5. Cleaning and maintenance
6. Technical specifications
7. Disposal of old electrical appliances
8. Technical support service and warranty
1. Parts and components
12345
6
7
8
9
10
11
12
13
1. Front grid
2. Small blades
3. Large blades
4. Back grid fixing nut
5. Back grid
6. Motor shaft
7. Fan head’s upper part
8. Fan’s head lower part
9. Fastening wing screw
10. Height fixing wing screw
11. Fan support
12. Fan base
13.
2. SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the appliance.
Keep this instruction manualfor future reference or new users.
•Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the wall
outlet is grounded.
•Check the power cord regularly for visible damage. If the
cord is damaged, it must be replaced bythe officialTechnical
Support Service of Cecotec in order to avoid any type of
danger.
•Do not immerse the cord, plug, or any non-removable part
of the appliance in water or any other liquid, nor expose the
electrical connections to water. Make sure your hands are
dry before handling the plug or switching on the appliance.
WARNING: if the appliance falls accidently into water, unplug it
immediately and do not reach into the water!
•Do not operate the device if any fault or unusual sign is
detected.
•Keep hair, loose clothing, fingers and otherparts ofthe body
away from the appliance’s openings and moving parts.
•Make sure the appliance is placed on a flat and stable
surface during operation.
•Do not use the appliance near a window, rain could cause
an electric shock.
•Do not operate the product below or next to curtains.
•Do not cover the grids and do not place the product’s cord
under carpets or other objects during operating. Keep a
minimum safety distance of 20 cm from the appliance to
any object or wall on each side, back and front.
•Do not operate the device unattended.
•Always turn off and unplug the appliance when not in use
and before moving it to a new location. Pull from the plug,
not the cord, to disconnect it from the outlet.
•This appliance is intended for domestic use only. It is not
suitable for commercial or industrial use. Do not use it
outdoors.
•Cleaning and maintenance tasks should be carried out
according to this manual to ensure correct operation of the
device.
•This appliance is not intended to be used by children
and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.
•Supervise young children to make sure that they do not play
with the appliance. Close supervision is necessary when
the appliance is being used by or near children.
3. PRODUCT ASSEMBLY
The fan is packed disassembled and must be properly assembled following the instructions in
this manual in order to ensure its correct operation.
WARNING:
•Do not operate the product unless it is completely assembled and always operate it in an
upright position to avoid injuries and accidents.
•Take the product out of the box and make sure all its components are in good conditions.
If there is any part missing or damaged, contact the Technical Support Service of Cecotec
immediately.
1. Use the screws and the Fixing plate to assemble the fan support to the base. Pull the height-
adjustment bar out from the fan’s support to the desired height and then use the height fixing
wing screw to lock it.
2. Place the fan body on top of the support element.The fan support must be introduced inside
the fan body in such way that the whole device is stable. Use the fastening wing screw to fix
tightly both parts.
3. Install the back grid on the motor shaft and use the back grid fixing nut to fix it tightly.
4. Place the large blades in their position making sure the grooves in its centre match the ones
on the back grid fixing nut. Then, place the smaller ones next and screw them anticlockwise to
fix them securely.
5. Lastly, install the front grid in its position and use the grid ring to hold both grids together.
Fasten the ring so that it is properly attached.
12
4. OPERATION
Note: Make sure all the parts are properly assembled and in good conditions before operating
the device.
CONTROL PANEL
1. Normal mode
2. Programmed hours
3. Modes
4. On/off
5. Oscillation
6. Eco mode
7. Sleep mode
8. Selected speed
9. Speed setting
10. Timer
REMOTE CONTROL
1. Increase time/speed
2. Decrease time/speed
3. Oscillation
4. On/off
5. Timer
6. Mode
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
ENGLISH
Functions and modes
All the following functions and modes can be operated from the control panel and from the
remote control.
• Press the power button to turn the device on or off.
•Press the speed button to select the fan’s air speed, from 1 to 6. The speed light indicator
will light up while this function is operating.
•Press the mode button to select between 3 operating modes: Normal, Eco and Sleep. The
mode light indicator will light up according to the selected mode.
•Press the oscillation button to activate this function. The oscillation light indicator will
light up while it is activated.
•Press the timer button to activate or deactivate this function. It can be programmed for 1,
2, 4 or 8 hours than can be added up, therefore it can be programmed for a totaltime of 15
hours. The display will light up the selected timer option.
5. CLEANING AND MAINTENANCE
•Always turn the device off and unplug it from the power supply before carrying out
cleaning and maintenance tasks.
• Use a soft dampened cloth to clean the product’s surface.
6. TECHNICAL SPECIFICATIONS
Product reference: 05227/05228
Model: ForceSilence 1010/1020 ExtremeConnected
60 W, 220-240 V - 50 Hz
Made in China | Designed in Spain
7. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), specifies that old household electricalappliances must not be disposed ofwith
the normal unsorted municipal waste. Old appliances must be collected separately, in
order to optimize the recovery and recycling of the materials they contain, and reduce
the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation to dispose
of the appliance correctly. If the product has a built-in battery or uses batteries, they should be
removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the correct
disposal of old appliances and/or their batteries.
8. TECHNICAL SUPPORT SERVICE AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long as the proof of
purchase is submitted, the product is in perfect physical condition, and it has been given proper
use, as explained in this instruction manual.
The warranty will not cover the following situations:
•The product has been used forpurposes otherthanthose intended forit, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other
fault attributable to the customer.
•The product has been disassembled, modified, or repaired by persons, not authorised by
the official Technical Support Service of Cecotec.
• Faults deriving from the normal wear and tear of its parts, due to use.
•The warranty service covers every manufacturing defects of your appliance for 2 years,
based on current legislation, except consumable parts. In the event of misuse, the
warranty will not apply.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to
contact Cecotec Technical Support Service at +34 963 210 728.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Admirador de cecotec
cecotec
cecotec FORCESILENCE 9800 SKYLINE BLADELESS Manual de usuario
cecotec
cecotec TOTALPURE 3IN1 CONNECTED Manual de usuario
cecotec
cecotec 05912 Manual de usuario
cecotec
cecotec FORCE SILENCE 1600 WOODY SMART Manual de usuario
cecotec
cecotec FORCESILENCE 790 FRESHESSENCE IONIC Manual de usuario
cecotec
cecotec FORCE SILENCE 1600 WOODY SMART Manual de usuario
cecotec
cecotec ForceSilence 8190 SkyLine Manual de usuario
cecotec
cecotec EnergySilence 8190 Skyline Ionic Manual de usuario
cecotec
cecotec ENERGYSILENCE 8050 SKYLINE SMART Manual de usuario
cecotec
cecotec FORCESILENCE AERO 350 Manual de usuario
cecotec
cecotec PUMBA 1800 TRAVEL FAN Manual de usuario
cecotec
cecotec EnergySilence 9800 Skyline Bladeless Manual de usuario
cecotec
cecotec ENERGYSILENCE 2000 COOL TOWER SMART Manual de usuario
cecotec
cecotec ENERGYSILENCE 3000 DESKTOWER Manual de usuario
cecotec
cecotec ForceSilence 560 Woodesk Manual de usuario
cecotec
cecotec ENERGYSILENCE 890 SKYLINE Manual de usuario
cecotec
cecotec ENERGYSILENCE 620 MAXFLOW SMART Manual de usuario
cecotec
cecotec FORCESILENCE 9800 SKYLINE BLADELESS Manual de usuario
cecotec
cecotec FORCESILENCE 890 SKYLINE Manual de usuario
cecotec
cecotec ENERGYSILENCE AERO 5400 AQUA CONNECTED Manual de usuario
