CDA EVX90SS Guía del usuario
EVX90SS
Ceiling extractor
Use and maintenance
2| Instruction Manual
Contents
3Important information
5Using your extractor
6Care and maintenance
7Installation instructions for standard fitting
15 Installation instructions for mounting the motor externally
15 Ducting
16 Recirculation
17 Mains electrical connection
18 Guarantee
19 Troubleshooting
20 Energy eciency information
Instruction Manual | 3
Important information
The CDA Group Ltd cannot be held responsible for injuries
or losses caused by incorrect use or installation of this
product. Please note that CDA reserve the right to invalidate
the guarantee supplied with this product following incorrect
installation or misuse of the appliance or use in a commercial
environment. This appliance is not designed to be used by
people (including children) with reduced physical, sensorial or
mental capacity, or who lack experience or knowledge about it,
unless they have had supervision or instructions on how to use
the appliance by someone who is responsible for their safety.
Under no circumstances should any external covers be removed
for servicing or maintenance except by suitably qualified
personnel.
Appliance Information:
Please enter the details on the appliance rating plate below for
reference, to assist CDA Customer Care in the event of a fault
with your appliance and to register your appliance for guarantee
purposes.
Appliance model
Serial number
EU Declarations of Conformity:
This appliance has been manufactured to the highest standards
and complies with all applicable legislation, including Gas
safety, Electrical safety (LVD) and Electromagnetic interference
compatibility (EMC).
4| Instruction Manual
IMPORTANT INFORMATION FOR CORRECT DISPOSAL
OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2012/19/EU.
At the end of its working life, the product must be taken to a
special local authority waste collection centre or to a dealer
providing appliance recycling services. Disposing of a household
appliance separately avoids possible negative consequences
for the environment and health. It also enables the constituent
materials to be recovered, saving both energy and resources.
As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled
dustbin.
Please note:
• Under no circumstances should the extractor be connected to any
gas ventilation system, flue system or hot air ducting system
• Do not vent the extractor into an attic or loft space
• Only house the extractor in rooms with adequate ventilation.
Remember that the extractor is powerful and extracted air needs
to be replaced
• Do not use silicone sealant to secure the hood to the ceiling
• You must be able to isolate the extractor from the mains electrical
supply after installation
• Steam cleaners must not be used when cleaning this appliance
• The performance of your extractor will vary depending on a
number of factors. These include: type of extraction, length of
ducting, room volume, ventilation available and cleanliness of the
filters
Instruction Manual | 5
Using your extractor
Power button
Pressing once will start the extractor at the lowest speed
setting, pressing again will turn the extractor o
Light button
Turn the lights of the extractor on or o
High speed button
Press to activate the highest speed setting, the display
will show the number 3. Holding this button down for 3
seconds activates the booster function for 5 minutes and
the display will show the letter B
Middle speed button
Press to activate the middle speed setting, the display will
show the number 2
Low speed button
Press to activate the lowest speed setting, the display will
show the number 1
Timer button
Pressing this button will activate the timer function and cause
the display number to flash. The extractor will automatically
turn o after 15 minutes. Changing the speed setting will not
cancel this function. To cancel this function simply press the
timer button again
Controls
Fig. 1
Power button
High speed button
Timer button
Light button
Low speed button
Middle speed button
6| Instruction Manual
Care and Maintenance
Cleaning
You should use a non-abrasive cleaner. Any abrasive cleaner
(including Cif) will scratch the surface and leave marks on the
extractor. You can clean your extractor eectively by simply using
a dilute solution of water and mild detergent and drying to a shine
with a clean cloth.
Removing and cleaning the grease filters
To remove the grease filter push in on the button on the handle
and pull it down, when the catch is released at the front it can
be removed completely. The grease filters should be kept clean
to minimise the risk of fire, you should remove and clean the
grease filters with hot soapy water. You can also wash the grease
filters in a dishwasher, ensuring that you place them in an upright
position to prevent damage from other items in the dishwasher.
After rinsing and drying, replace the grease filter by reversing the
removal process. Please note: Cleaning the grease filters in the
dishwasher may lead to discolouration. This is normal and does not
constitute a fault with the appliance.
Changing the charcoal filters (if fitted)
To ensure best performance of your extractor, you should
replace the charcoal filter every four to six months, depending
on use. To attach a new charcoal filter, first remove the grease
filters as described above. Oer up the charcoal filter so that
the magnetic pins are facing upwards, one to the rear and one to
either side. The filter will be held in place by magnetic force. Finally,
replace the grease filters
Instruction Manual | 7
Installation instructions for standard fitting
Please note:
All installation measurements given are in millimeters
Fig. 2
582
882
Make a cutout in the ceiling with the measurements below
Fig. 3
Dimensions for installation reference
92 92
882
153.5
153.5
137.5
137.5
582
8| Instruction Manual
Fig. 4
Fig. 5
Fix the upper bracket to the support structure
Fig. 6
Fasten the lower bracket to the upper bracket with the 8 screws supplied. We
recommend having an 85 - 100mm gap between the opening in the ceiling
and the lowest point of the lower bracket
Fix the duct outlet to the extractor with the 4 screws supplied
Instruction Manual | 9
Fig. 7
Locate the extractor in the ceiling opening, make sure to connect your
ducting and mains electrical connection before proceeding to the next
step
Fig. 8
Fix the extractor to the bracket with the 6 screws and washers provided.
Tighten evenly on both sides until secure, be careful to not overtighten
10 | Instruction Manual
Remove the 8 screws fixing the motor housing on the extractor and detach
it from the casing
Remove the four screws that fix the airguide to the housing and remove it
Fig. 9
Fig. 10
Installation instructions for mounting the
motor externally
Tabla de contenidos
Otros manuales de Campana de ventilación de CDA
CDA
CDA EZA60BL Guía de inicio rápido
CDA
CDA EVX101 Guía de inicio rápido
CDA
CDA 3U10 Guía de inicio rápido
CDA
CDA CIN6 Manual de referencia
CDA
CDA EDD9BL Manual de referencia
CDA
CDA A1 Manual de usuario
CDA
CDA EVCK4 Manual
CDA
CDA ECN62 Manual de referencia
CDA
CDA ECR90CM Instrucciones de instalación y funcionamiento
CDA
CDA CTE6 Manual de usuario
CDA
CDA ECHK90 Manual de referencia
CDA
CDA CPXI9 Manual de referencia
CDA
CDA CTE9 Guía de inicio rápido
CDA
CDA 3C9 Extractor Manual de referencia
CDA
CDA CST62 Instrucciones de instalación y funcionamiento
CDA
CDA EGA60BL Instrucciones de instalación y funcionamiento
CDA
CDA EVH9 Manual de usuario
CDA
CDA CIGE9 Manual
CDA
CDA 3D9BL Manual de referencia
CDA
CDA EXG60BL Guía del usuario
