Using wood screws provided,
install the mounting bracket on the
underside of the table.
The mounting bracket has 4
studs into which the EZ Cinch body
will slide and lock. The bracket
positions the EZ Cinch at an ideal
height for easy access to drives
and cable connections.
Install Mounting Bracket
The Mounting Bracket is designed to work with
the HorizonLine™ Leg System, used on Horizon-
Line™ and Pi™ computer tables. Use the Phillips/
Hex Head bolts supplied with the table (pictured
above) to install with the leg mounting bracket
as shown.
Wrap Straps Around the CPU
Adjust the position of the metal clips
with extra slack to go around your CPU.
Small form factor, large towers and con-
toured cabinet shapes are no problem.
Insert the metal clip into the EZ Cinch
body, then pull on the straps until both
are evenly snug.
Locate the Ratchet Wrench, stowed
in the body of the EZ Cinch.
Use the wrench to tighten the straps
to hold the CPU securely.
If you need to release the ratchet
to reposition the straps, use the
release lever.
©2007 CBT Supply, Inc. All Rights Reserved. Please call 800-770-7042 if you need technical support. 2
