Maintenance & Safety
1. Check the equipment regularly. Minimum every 3 months.
2. Check the water source, water quality and inlet hose periodically.
In hard water areas appropriate water filtration must be installed
call 01229 480001 for more information.
3. Regularly check the unit for lime scale build up.
4. Unplug the water boiler from the power supply before cleaning.
Keep the water boiler clean, use either a wet towel or cleaning wipe. Never
use a water hose directly to clean equipment. Do not allow water to have
contact with the wiring, plug, inner components, etc. This may lead to
malfunction and endanger user safety.
5. Check that the power connection is secure and fully inserted into the socket.
6. All users must be competent and abide by local electrical safety
regulations. Before this equipment leaves the factory, every part has
been inspected for quality.
7. This equipment is designed for boiling water. The warranty is voided if this
equipment is used for other applications.
8. All safety devices & removable parts should be tested on site by authorized
personnel before use, Maintenance should be carried out after the power
has been disconnected.
9. In the event of a malfunction, disconnect power immediately & call our service
team on 01229 480001.
Warranty
Terms of the warranty are specified at point of sale.
Any applicable warranty is voided if.
1. The boiler is used for any other application.
2. The boiler is not installed or maintained properly.
3. The boiler has continued to be used following malfunction or damage.
4. Parts have been changed without prior approval from manufacturer or authorized
maintenance engineers.
5. Damage or malfunction due to localised incidental or accidental damage, flooding,
lightning strike or power surge.
5
Maintenance
