Casio ID-12 Manual de usuario

USER’S GUIDE ID-12

Day of the week

Current time

(Hour, minutes, seconds)

DATE (month - date)

PM indicator

•A sticker is affixed to the display of this clock when you purchase it. Be sure to remove the sticker before using

the clock.

•Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the

illustration.

GENERAL GUIDE

1Time Set buttons

Use these buttons to set the current time.

2SET button

Use this button when setting the current time.

3RESET button

Press to reset the clock after replacing batteries.

1 cm

USER’S GUIDE ID-12

2. While the screen you want is on the display, use the Time Set buttons (11

to change the digits that are flashing.

•Holding down +or –changes the flashing digits at high speed.

•You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with

the date setting.

•Pressing +or –while the Time Setting Screen is on the display causes the seconds count to be reset to 00.

•Each press of +or –while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour

and 24-hour timekeeping.

3. After making the settings you want, use the SET button (22

to display the Normal Timekeeping Screen.

•The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display

for about three minutes without performing any operation.

Press +to increase

the flashing digits.

Press –to decrease

the flashing digits.

Month and Day Setting Screen Time Setting Screen

Normal Timekeeping Screen

Year Setting Screen 12-hour/24-hour Timekeeping Screen

SETTING THE TIME

1. Press the SET button (22

2)to cycle through the setting screens as shown below.

BATTERY REPLACEMENT

Replace batteries whenever the display of the clock becomes dim and difficult to read.

1. Open the battery compartment cover as shown in the illustration.

2. Remove both old batteries.

3. Load new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions. If you

load batteries incorrectly, they can burst and damage the clock.

4. Replace the battery compartment cover.

5. Press the RESET button (33

3). Be sure to press the RESET button (33

3)after replacing batteries.

Battery precautions

•Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly.

•Replace the batteries at least once a year, even if the current batteries are working properly.

•Never charge the batteries that come with the clock.

•Should the batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto

your skin.

•The batteries that come with the clock lose some of their power during transport and storage.

•Never mix old and new batteries, or batteries of different brands.

Otros manuales de Reloj de Casio

Manuales populares de Reloj de otras marcas

Silicon Laboratories

Silicon Laboratories SI5324 Manual de usuario

Heathkit

Heathkit GC-1005 Manual de usuario

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manual de usuario

Andrew O'Malley

Andrew O'Malley DOTKLOK Manual de usuario

ALGE-Timing

ALGE-Timing ASC3 Manual de usuario

Bodet

Bodet Profil 960 Manual de usuario

Nixie Clock

Nixie Clock Divergence Meter Manual de usuario

La Crosse Technology

La Crosse Technology WS-8256-AL Manual de usuario

Mini Gadgets

Mini Gadgets MCPro Manual de usuario

Progetti

Progetti ILTEMPOSTRINGE Manual

BVItech

BVItech BV-101 Manual de usuario

Progetti

Progetti KALIMERO Manual

La Crosse Technology

La Crosse Technology WT-3141b Manual

La Crosse Technology

La Crosse Technology W86531 Manual de usuario

Sharp

Sharp SPC900 Manual de usuario

La Crosse Technology

La Crosse Technology 404-50447 Manual de usuario

Datexx

Datexx DF0063 Manual de usuario

LG LEC-005 Manual de usuario