Casio SE-S10 Instrucciones de funcionamiento

Load Memory Protection Batteries and Paper Roll

A) Remove the printer cover

B) Open Battery compart

ment cover

C) Insert 2 new “AA”type batteries

into the compartment

D) Install the supplied 58mm thermal paper roll by lifting up

the platen arm (Push open button) and placing the paper

roll into the printer well. Close the cover firmly.

Initialize Your Cash Register

Insert the supplied key and turn

to the “OFF”position. B)

Plug the power cord into the AC outlet and wait for

the instructional messages to print.

IMPORTANT Be sure that the plus (+) and minus (-) ends of the batteries

are facing in the directions indicated in the illustration inside the

battery compartment.

To prevent losing all of your settings and sales

data, we recommend you install the two memory

protection batteries.

Choosing the Language

A) For English select the following:

Please also refer to printout instructions from the cash register

To set for

journal

printing

To set for receipt printing

Turn key to the PGM position

Perform steps below.

Setting Date and Time

Input date and time as indicated on the printout chit on the cash

A) Turn key to the

Z position

B) Perform the following sequence

Note: This operation automatically sets correct tax

rates, rounding, and receipt formats to Australian

standards.

Setting for Australian Standards

A) Turn key to the PGM position

position

B) Press

To enable

C) Press Press departments as required

D) Press

If using shift departments

otherwise skip this step

To disable use same sequence except use in place of

Australian Quick Programming Guide

Casio SE-S10 (please refer to the supplied “User Manual”for further information)

“

Flash Report

A flash report

is a useful tool

to monitor how much money has been taken throughout the trading day

A) Turn Key to the Xposition

B) Press

Electronic Journal Report

The electronic journal records most operations that are performed at the cash register. Data can be printed out

if a hard copy is required and it is also possible to designate a read range by date and or consecutive number.

(Please refer to the user manual for additional information on this feature)

Note: This operation will print and reset the Electronic Journal print only is performed from X mode please refer User Manual for more

details

The following operation will print the end of day financial report.

Note: Using XMode will print only while ZMode will print and reset the figures ready for the next trading day.

Daily End of Day Report

A) Turn Key to the Zposition

B) Enter 58

Turn key to the PGM position

Perform steps below.

Setting GST to Departments

Printer switch for receipt or Journal

ó Receipt message 1st line

YOUR RECEIPT

ó Receipt message 2nd line

THANK YOU

ó Receipt message 3rd line

CALL AGAIN

ó Receipt message 4th line

ó Receipt message 5th line

Australian Quick Programming Guide

Casio SE-S10 (please refer to the supplied “User Manual”for further information)

Setting descriptors to PLU’s

A) Turn Key to PGM mode

B) Press

C) Press

D) Enter

E) Press

The following sequence will program the descriptor “DAIRY”to PLU

number 1.

Linking PLU’s to Departments

Linking PLU’s to departments is only required if you are using PLU’s.

This process aids end of day reporting by grouping products (PLU’s)

with departments

A) Turn Key to PGM mode

B) Press

C) Enter

D) Press

The SE-S10 contains 20 departments, 5 are located on the keyboard and

an additional 15 are accessible using the department shift function.

Prices can be set to departments if required or entered manually from

with

in the sale.

B) Press

D) Key price then press department key

A) Turn Key to PGM mode

Note: Press dept shift once to access departments 6~10 or twice

for 11~15 e

tc.

IMPORTANT: Never

use decimal point key when imputing

price.

C) Press Dept Shift if programming shift departments

otherwise skip to step D

A) Turn Key to PGM mode

B) Press

C) Press

D) Enter

E) Press

The SE-S10 does have the option of 500 PLU’s. A PLU lookup function is

provided should you decide to use PLU’s on this register.

E) Press

Setting Descriptors to Departments

A) Turn Key to PGM mode

B) Press

D) Enter

E) Press

C) Press

The following procedure will program the descriptor “DAIRY”to Department number 1.

Programming Receipt Message

You can program receipt message text at

the top of the receipt. Up to 5 lines of text

can be programmed.

Receipt message sample

Links PLU1 to

Department 4

This procedure sets $1.00 to PLU1.

Note: button is used to add a space or to lock a character if more than one character is used from a single key in

succession. An example of how this button is used is shown in section 13 - “Receipt Text Programming”.

Setting prices to Departments

Setting prices to PLU’s

Otros manuales para SE-S10

Otros manuales de Caja registradora de Casio

Casio

Casio PCR-T2000 Manual de usuario

Casio

Casio QT-6100 Manual de usuario

Casio

Casio SR-C4500 Manual de usuario

Casio

Casio TK-6500 Series Manual de usuario

Casio

Casio TK-6000 Series Manual de usuario

Casio

Casio CE-285 Instrucciones de montaje

Casio

Casio SA-5000 Manual de usuario

Casio

Casio SE-G1 Manual de usuario

Casio

Casio TK-7000 Manual de usuario

Casio

Casio TE-8500F Series Manual de usuario

Casio

Casio PCR T48S - Cash Register Manual de usuario

Casio

Casio QT-2000 Manual de usuario

Casio

Casio CE-280 Instrucciones de montaje

Casio

Casio PCR-T500 Manual de usuario

Casio

Casio SE-S300 Manual de usuario

Casio

Casio I/O-PB-11 Manual de usuario

Casio

Casio QT-8000C Manual de usuario

Casio

Casio TE-100 Manual de usuario

Casio

Casio TE-2200 Manual de usuario

Casio

Casio TE-2000 Manual de usuario

Casio

Casio SE-S2000 Manual de usuario

Casio

Casio CE-2300 Instrucciones de montaje

Casio

Casio PCR-T285 Manual de usuario

Casio

Casio TK-T200 Manual de usuario

Manuales populares de Caja registradora de otras marcas

Royal

Royal 480nt Manual de usuario

Olivetti

Olivetti ECR 8200 S Manual de usuario

TEC

TEC TEC FS-3600 Manual de usuario

Integrated System Laboratory

Integrated System Laboratory ISL 4006 Manual de usuario

Sam4s

Sam4s ER-380 Guía de solución de problemas

Sharp

Sharp XE-A206 Manual de lista de piezas

Samsung

Samsung ER 5215 Manual de usuario

Toast

Toast Toast Manual de usuario

Sharp

Sharp XE-A130 Guía de inicio rápido

TEC

TEC MA-600-1 series Manual de usuario

QUORION

QUORION CR 1200 Manual de usuario

Olivetti

Olivetti ECR 7700 LD eco Plus Manual de usuario

Sharp

Sharp XE-A137-WH Operation Manual rápido

Sharp

Sharp XE-A203 - Cash Register Thermal Printing Graphic Logo... Manual de usuario

TEC

TEC TEC MA-1060 Manual de usuario

ELCOM

ELCOM Euro-2100TE Manual de usuario

American Changer

American Changer CLASSIC Series Manual de usuario

Sam4s

Sam4s ER-180 Manual de usuario