Casio SF-4300A Guía de solución de problemas
JAN. 1993
R
(without price)
SF-4300A(LX-571AT)
SF-4600(LX-571ET/FT)
INDEX
CONTENTS
1. SCHEMATIC DIAGRAM.................................................................................................... 1
2. SPECIFICATIONS ............................................................................................................. 3
3. TO REPLACE THE BATTERIES....................................................................................... 4
4. DATA TRANSFER............................................................................................................. 5
5. BLOCK DIAGRAM ............................................................................................................ 9
6. LSI, IC (Pin Function) ..................................................................................................... 10
7. To FIX TAB ASS'Y ........................................................................................................... 13
8. TROUBLE SHOOTING.................................................................................................... 14
9. HARD CHECK ................................................................................................................. 17
10. DATA TRANSFER CHECK ............................................................................................. 22
11. PCB VIEW........................................................................................................................ 26
12. ASSEMBLY VIEW ........................................................................................................... 27
13. PARTS LIST .................................................................................................................... 29
— 1 —
1. SCHEMATIC DIAGRAM
1-1. MAIN PCB
— 2 —
1-2. KEY MATRIX
— 3—
2. SPECIFICATIONS
Data storage:
Storage and recall of telephone, memo, schedule, reminder data; calendar display; mark
protection; secret area; editing; memory status display
Clock:
World time; reminder alarm; schedule alarm; daily alarm; accuracy under normal tempera-
tures: ±3 seconds average
Calculation:
10-digit arithmetic calculations; arithmetic constants (+, –, ×, ÷); independent memory;
percentages; square roots; 20-digit approximations; date calculations; other mixed calcula-
tions
General:
Display element: 16-column ×4-line LCD
Memory capacity: 32 KB / SF-4300A, 64 KB / SF-4600
Main component: LSI
Power supply: 3 lithium batteries (CR2032)
Power consumption: 0.05W
Battery life: Approximately 200 hours continuous operation in Telephone Directory
approximately; 150 hours repeating one minute of input and 10 minutes
of display in Telephone Directory; approximately 12 months for memory
back up
Test condition: 20°C
Auto power off: Approximately 6 minutes after last key operation
Operating temperature: 0°C ~ 40°C (32°F ~ 104°F)
Dimensions:
Unfolded: 12.4H x141W x80.5Dmm (1/2"H x 5-5/8"W x3-1/8"D)
Folded: 8.9H x141W x157Dmm (3/8"H x 5-5/8"W x6-1/4"D)
Weight: 110g (3.9 oz)
Current consumption:
Power switch MIN. [µA] MAX [µA]
OFF 9.51
ON 529 606
ON 1,287 1,398
(Operating)
— 4—
3. TO REPLACE THE BATTERIES
1) Loosen the screw on the back of the SF-4300A /
SF-4600 that holds the battery compartment
cover in place, and remove the cover.
2) Loosen the screw that secures one of the three
battery holders in place and remove the battery
holder.
Caution
Be sure to remove only one battery at a time.
Otherwise, you will lose all data stored in memory.
3) Replace the old battery with a new one, making
sure that the positive (+) side of the new battery
is facing up (so you can see it).
4) Replace the battery holder and secure it by tightening its screw.
• Be sure careful that you do not over tighten the screw.
5) Repeat steps 2) through 4) for the other two batteries.
• Be sure to replace all three batteries. Never mix old batteries with new ones, and be sure
to use CR2032 lithium batteries only.
6) After you replace all three batteries, replace the battery compartment cover and secure it
by tightening its screw.
• Be careful that you do not over tighten the screw.
Screw
— 5—
ON CAL TIME TIME TIME M+
DATE DATE DATE R
2) Turn on the power switch of each machine.
3) The slave machine must be set the date of Feb. 3rd, 1901 into the memory under the
calculator mode.
Operation:
If you don't set the date, the "PASSWORD" isn't transferred to the slave machine.
123
4. DATA TRANSFER
SF-4300A / SF-4600 can transfer customers data to other SF-4300A / SF-4600 with memory
protection only when replacing the LCD or the outer case. How to transfer the data.
* Before connecting the cable (SB-60/62), be sure to reset the slave machine to clear all
data.
1) Turn off the power switch and connect the two units using the cable (SB-60/62) as shown
in the drawing.
M SUN
1901/ 2/ 3
SB-60/62 accessory cable
— 6—
Setting up for Data Communications
The following procedures describe what you should do to set up for data communications
between two SF Units or between an SF Unit and a personal computer. In addition to
hardware connections, it details how to set up the communications parameters and how to
set up the SF-4300A / SF-4600 to receive data. By following these instructions carefully,
you can be ensured of successful communications every time.
To connect two SF Units
1. Check to make sure that the power of the two SF Units is switched off.
2. Remove the covers from the connectors on the two SF Units.
3. Connect the two SF Units using the optional SB-60/62 cable. You can also connect
them using an SB-60/62 cable.
Important
Be sure to replace the connector covers on the SF Units when you are not performing data
communications.
4) Check the hardware parameters.
1 While an initial screen is displayed, press FUNC twice to display the second function
menu.
• You can perform the above operation while the initial screen of the Telephone
Directory, Memo Mode, Schedule Keeper, Calendar, Reminder is displayed.
2 Press 4 to select DATA COMM.
3 Press 3 to select SET UP.
FUNC FUNC
2 ALL DELETE
3 LABEL EDIT
4 DATA COMM
CAPS
1 SEND
2 RECEIVE
3 SET UP
4 FDD
CAPS
SET UP
PARITY E O N
BIT LENGTH 78
BPS 2400 4800
CAPS
3
4
— 7—
∇
∆
SET
2 ALL DELETE
3 LABEL EDIT
4 DATA COMM
CAPS
1 SEND
2 RECEIVE
3 SET UP
4 FDD
CAPS
RECEIVE OK
TO STOP
PRESS (ESC)
CAPS
DATA
2 ALL DELETE
3 LABEL EDIT
4 DATA COMM
CAPS
FUNC FUNC
2
4
FUNC FUNC
4 If the units have another condition, reset as above.
• To change the parameters
1. Use the ∆and — cursor keys to change the selected parameter on the display.
2. Use the and cursor keys to change the high-lighted setting of the currently
selected parameter.
3. Press SET to store them in memory.
5) Set up the slave machine
1 While an initial screen is displayed, press FUNC twice to display the second function
menu.
• You can perform the above operation while the initial screen of the Telephone
Directory, Memo Mode, Schedule Keeper, Calendar, Reminder is displayed.
2 Press 4 to select DATA COMM.
3 Press 2 to select RECEIVE.
6) Set up the customer’s machine.
1 While an initial screen is displayed, press FUNC twice to display the second function
menu.
• You can perform the above operation while the initial screen of the Telephone
Directory, Memo Mode, Schedule Keeper, Calendar, Reminder is displayed.
— 8—
2 Press 4 to select DATA COMM.
3 Press 1 to select SEND.
4 Press 3 to select ALL DATA.
5 Press SET to start the send operation or ESC to abort the operation without sending
anything.
• Data is send in the sequence: Telephone Directory, Memo Mode, Reminder Mode,
Schedule Keeper, Calendar.
• To abort the send operation at any time, press ESC.
• If an error occurs during the send operation, the message “SEND ERROR!” appears
on the display. Press ESC to clear the error message.
6 After the send operation is complete, the display returns to the initial screen of the mode
you were in when you started this procedure.
1 ONE ITEM
2 MODE DATA
3 ALL DATA- SEND -
CAPS
1 SEND
2 RECEIVE
3 SET UP
4 FDD
CAPS
SEND ALL DATA?
SET/ESC
CAPS
SENDING
TO STOP
PRESS (ESC)
CAPS
DATA
4
1
3
SET / ESC
Otros manuales para SF-4300A
1
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Calculadora de Casio
Casio
Casio CFX-9970G Manual de usuario
Casio
Casio FX-9750GII-IH Manual de usuario
Casio
Casio DM-1200S Manual de usuario
Casio
Casio fx-82MS Manual
Casio
Casio FX-D400 Manual de usuario
Casio
Casio DX-12S Manual de usuario
Casio
Casio DJ-120D plus Manual de usuario
Casio
Casio FX-300ES PLUS Manual de usuario
Casio
Casio df-320tm Manual de usuario
Casio
Casio fx-7700G Manual de usuario
Casio
Casio FX-820MS Manual de usuario
Casio
Casio ALGEBRA FX 2.0 Plus Manual de usuario
Casio
Casio FX-350ES PLUS Manual de usuario
Casio
Casio Reckon Manual de usuario
Casio
Casio CFX-9850G PLUS Manual de instrucciones y seguridad
Casio
Casio ms-310m Manual de usuario
Casio
Casio fx-3650P II Instrucciones de funcionamiento
Casio
Casio MJ-12D Manual de usuario
Casio
Casio fx-115ES Manual de usuario
Casio
Casio CLASSPad300 - ClassPad 300 Touch-Screen Graphing Scientific... Manual de usuario
