Carrier System Touch Instrucciones de montaje

Installation and

CARRIER CORPORATION @2015

A member of the United Technologies Corporation family- Stock symbol UTX- Catalog No. 11-808-525-01- 5/7/2015

_ Verify that you have the most current version of this document from www.hvacpartners.com or your local Carrier

office.

Important changes are listed in Document revision history at the end of this document.

Corporation. BACnet is a registered trademark of ASHRAE. All other trademarks are the property of their respective

owners.

Contents

What is the System Touch? ........................................................................................................................................ 1

Specifications ........................................................................................................................................................ 2

System Touch screens ......................................................................................................................................... 3

Wiring and mounting the System Touch ................................................................................................................... 9

Wiring specifications ............................................................................................................................................ 9

To wire and mount the System Touch ............................................................................................................ 10

Setting up the system ............................................................................................................................................... 12

Step 1: Set up communications ..................................................................................................................... 12

Step 2: Discover controllers ............................................................................................................................ 13

Step 3: Create the system database ............................................................................................................. 14

Step 4: Optional - Install custom screen file ................................................................................................ 15

Step 5: Set up scheduling functionality ........................................................................................................ 15

Step 6: Optional - Adjust touchscreen settings ............................................................................................ 16

Using System Touch's temperature and humidity sensors to control equipment ............................................... 17

To edit touchscreen settings ..................................................................................................................................... 18

To update the System Touch's firmware ................................................................................................................. 20

Resetting the System Touch ..................................................................................................................................... 21

Compliance ................................................................................................................................................................ 22

FCC Compliance ................................................................................................................................................. 22

CE Compliance ................................................................................................................................................... 22

Appendix: External sensor resistance requirements ............................................................................................ 23

Document revision history ........................................................................................................................................ 24

The System Touch is a touchscreen device with a 4.3 in. color LCD display that acts as a front-end interface to

controllers on a BACnet network.

To screens

specific

to the

controller

To Home screen

To previous screen

To Alarm Manager screen

To system To screens To setup screens

atarms for scheduling for the system or

the equipment touchscreen

The System Touch has built-in temperature and humidity sensors. You can use their values to control equipment.

You can also wire an external thermistor to the System Touch and use its value instead of the built-in temperature

sensor's value.

You can install and run the System Touch with only its built-in system screens, or you can create a custom

touchscreen file in ViewBuilder. This requires that you create custom screens in ViewBuilder, and then save the

touchscreen (.touch) file. See "Working with System Touch screens" in ViewBuilder Help.

NOTE To use custom screens, the System Touch must have v2.00-015 or later firmware.

Carrier Proprietary and Confidential

System Touch CARRIER CORPORATION @2015

WhatistheSystemTouch?

To set up a System Touch:

1Connect the System Touch to an MS/TP network (page 9).

2Discover BACnet devices on the same network or on a different BACnet ARCnet or BACnet MS/TP network

(page 12).

3Create the system database (page 12).

4Install custom screen file (optional) (page 12).

After you set up your system, you can:

• Schedule when equipment should run

• View alarms

• View Equipment Touch screens for individual controllers on the network. The information on the controller

screens depends on whether the controller is a Carrier controller or a third-party controller, and if it is an

Carrier controller, whether it has an Equipment Touch file.

NOTE To see a controller's Equipment Touch screens on the System Touch, the Equipment Touch file must

be downloaded to the controller before you create the System Touch database.

Specifications

Power 24 Vac (+15%), 5 VA, 50-60 Hz, Class 2.

Display 4.3 in. resistive touchscreen color LCD display with backlighting (Wide Quarter VGA,

480x272 pixels)

Enclosure ABS plastic with polycarbonate bezel

Ports • EIA-485 based serial port for BACnet MS/TP communication

• USB host port

Microcontroller 32-bit

Memory • 16 MB Flash memory to store program code and screen file.

• 1.5 MB RAM to store variable data and LCD data.

• 4 KB Serial EEPROM to store non-volatile configuration data.

Real-time clock A365-day real time clock/calendar chip. The time and date will be maintained for a

minimum of 72 hours after loss of power (at room temperature).

Audible alarm A piezoelectric sounder

notification

Temperature sensor Range: -4.0°Fto 140°F (-20°C to 60°C)

Accuracy over 30.O°Fto 100° F: +I.0°F (+0.55°C)

Accuracy over full range: +2.0° F (+1.1 ° C)

Resolution: 0.2 oF (0.1 oC)

Carrier Proprietary and Confidential

System Touch CARRIER CORPORATION @2015

WhatistheSystemTouch?

Humidity sensor Range: 0 to 100% RH

Accuracy over 20 to 80% RH: +3.0% RH

Accuracy over full range: +5.0% RH

Resolution: 0.05% RH

Environmental -4°F to 140°F (-20°C to 60°C), 10-90% RH, non-condensing

operating range

Mounting Wall or panel mounting within the building interior.

Overall dimensions Width: 5.44 in. (13.82 cm)

Height: 4.55 in. (11.56 cm)

Depth: 1.24 in. (3.15 cm)

Backplate dimensions Width: 4.79 in. (12.2 cm)

Height: 3.94 in. (10 cm)

Weight 8 oz. (0.23 kg)

Listed by UL-916 (PAZX), CE, FCC Part 15-Subpart B-Class A

Device identification The System Touch's box contains a label with the product name and the serial number

that begins with STO.

Remove the front of the System Touch and turn it over to see the serial number on a

label attached to the control board.

System Touch screens

The System Touch will display the system screens shown below and any custom-designed screens.

NOTE To use custom screens, the System Touch must have v2.00-015 or later firmware. Go to Touchscreen

Setup >About to see the firmware version number.

Screen name Description

Standby If included in the touchscreen file, this custom screen displays when the System Touch has

had no user activity for the time specified on the Inactivity Timeout screen. This Standby

screen is not interactive, and as soon as the user touches the screen, the Home screen

displays. If the touchscreen file does not include a Standby screen, the Home screen

displays after a period of inactivity.

NOTE You can show a device's Home and Standby screens instead of the System Touch's

Home and Standby screens. See instructions for Home Screen Setup in To edit

touchscreen settings (page $8).

Home A custom screen for the System Touch.

Carrier Proprietary and Confidential

System Touch CARRIER CORPORATION @2015

WhatistheSystemTouch?

Screen name Description

System View

The Home screen that shows each controller in the system, and, for Carrier controllers, the

zone temperature and zone color. From this screen, you can view alarms or set up

schedules. A user with an administrator-level password can edit the system or edit

touchscreen settings. This screen displays when the System Touch has had no user activity

for a period of time specified on the Touchscreen Setup > Inactivity Timeout screen (page

18).

Displays if you select a screen that requires an administrator-level password. If you have an

administrator-level password, enter it, then touch Done.

NOTES

• The default password for a new System Touch is admin.

• You can change the password on the Touchscreen Setup > Passwords screen (page

18).

• You log out on the Setup screen.

• If you try to go to a screen for a particular controller and you are prompted to log in, the

Equipment Touch screen for that controller requires a different password.

Carrier Proprietary and Confidential

System Touch CARRIER CORPORATION @2015

WhatistheSystemTouch?

Screen name Description

Alarm

Manager

Alarm Detail

Lets you view all alarms in the system. See "Viewing alarms" in the System Touch User

Guide.

Shows details of a single alarm. See "Viewing alarms" in the System Touch User Guide.

Schedule Groups

Lets you create groups of equipment so that you can set up a common operating schedule

for each group. From this screen, you can also edit or delete existing schedule groups. See

"Setting up schedules" in the System Touch User Guide.

Carrier Proprietary and Confidential

System Touch CARRIER CORPORATION @2015

WhatistheSystemTouch?

Screen name Description

Create Schedule

Group

Lets you create a group and assign equipment to it. See "Setting up schedules" in the

System Touch User Guide.

Schedules

Setup

Lets you view, add, edit, or delete BACnet schedules in the controller. See "Setting up

schedules" in the System Touch User Guide.

Touch a button to go to the Communications, Discovery, Viewfile, or Touchscreen Setup

screen, or to log out.

Carrier Proprietary and Confidential

System Touch CARRIER CORPORATION @2015

WhatistheSystemTouch?

Screen name Description

Communications

Discovery

Lets you define network communications for the System Touch. You also define the

network that you want the System Touch to scan during discovery. See Setting up the

system (page 12).

Lets you discover controllers on the network so that you can create the system database.

See Setting up the system (page 12).

Set Range

Lets you set a range (0-255) of MAC addresses to be discovered. See Setting up the

system (page 12).

Carrier Proprietary and Confidential

System Touch CARRIER CORPORATION @2015

Otros manuales para System Touch

Tabla de contenidos

Otros manuales de Equipo de grabación de Carrier

Carrier

Carrier KSAIC0301230 Manual de usuario

Carrier

Carrier KSAIF0101AAA Manual de usuario

Carrier

Carrier Fireye NXTSD507HD Manual del propietario

Carrier

Carrier System Touch Instrucciones de montaje

Carrier

Carrier KSAIF0401AAA Manual de usuario

Carrier

Carrier 30RBV Manual de usuario

Carrier

Carrier DLS VRF Manual de usuario

Carrier

Carrier KSAIC0301230 Manual de usuario

Carrier

Carrier APOLLO CONTROL 50HJQ004-016 Manual de usuario

Carrier

Carrier i-Vu XT Manual de instalación

Carrier

Carrier CSM Instrucciones de funcionamiento

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado