Carrier WF-60A1 Instrucciones de funcionamiento

INSTALLATION&

OWNER’ S MANUAL

SMART PORT OF AIR CONDITIONER

MODEL: WF-60A1

Thank you very much for purchasing our product. Before

using your unit, please read this manual carefully and keep it

for future reference.

GB- 1

1. SAFETY PRECAUTION

Smart Phone camera needs to be 5 million pixels

or above to make sure scan QR code well.

Due to different network situation, sometimes,

request time-out could be happened, thus, it is

necessary to do network conguration again.

Due to different network situation, sometimes,

control process may return time out. If this

situation occurs, do not feel confused, the display

on board and App may not be the same.

1. SAFETY PRECAUTION

Read the safety precautions carefully before

installing the unit.

Stated below are important safety issues that

must be obeyed.

Applicable system: iOS, Android.

(Suggest: iOS 8.0 or later , Android 4.0 or later)

Please check the service website for more

applicable devices.

Disclaimer: Due to the special situation existed

during App use, we explicitly claim as below:

Not all of the Andriod and iOS systems are

compatible with APP. We will not be responsible

for any issues as a result of the incompatibility.

Smart Kit wireless safety strategy

Smart Kit only support WPA-PSK/WPA2-PSK

encryption and none encryption .

WPA-PSK/WPA2-PSK encryption is

recommended.

CONTENTS

1. SAFETY PRECAUTION ...................................... 1

2. DOWNLOAD AND INSTALL APP........................ 2

3. INSTALLATION ACCESSORY ............................ 2

4. INSTALLATION METHOD................................... 2

5. SPECIFICATION ................................................. 4

6. USER REGISTRATION....................................... 4

7. NETWORK CONFIGURATION ........................... 4

8. HOW TO USE APP.............................................. 7

9. SPECIAL FUNCTIONS ....................................... 8

10. CHANGE THE INFORMATION OF DEVICE... 10

• This manual gives detailed description of the

precautions that should be brought to your

attention during operation.

• In order to ensure correct service of the smart

port, please read this manual carefully before

using the unit.

• For convenience of future reference, keep this

manual after reading it.

GB- 2

4. INSTALLATION METHOD

3. Wiring gure

4-core shielding wire

Extension cord

(purchased separately) Mainboard

The connective wires group-1

CN40

Fig 4-3

• Connect the male joint of the connective wires

group-1 to the mainboard, then connect the other

side of the connective wires group-1 to the 4-core

shielding wire of the smart port.(See Fig.4-3)

• If want to extent the wire, please use extension

cord (purchased separately). (See Fig.4-3)

4.Remove the upper part of the smart port

• Insert a slot screwdriver into

the slots in the lower part of the

smart port (2 places), and remove

the upper part of the smart port.

(Fig.4-4) Slots

Fig 4-4

4. INSTALLATION METHOD

1. WLAN controller structure size gure

Fig 4-1

2. Wiring Principle Sketch:

-----------------------------------

red red

black black

yellow yellow

brown brown

Fig 4-2

WLAN control box Indoor unit mainboard

Applicable to WF-60A1 only

4-Core Shield Cable, the length is

decided by installation

Insert of the mainboard CN40

3. INSTALLATION ACCESSORY

Select the installation location

Don't install at the place which is covered with heavy

oil, vapor or sulfureted gas, otherwise, this product

would be deformed that would lead to system

malfunction.

Preparation before installation

1. Please conrm that all the following parts have

been supplied.

No. Name Qty. Remarks

1Smart port 1 ————

2Installation and

owner’s manual 1 ————

3Screws 3

M4X20 (For

Mounting on the

Wall)

4Wall plugs 3 For Mounting on the

Wall

5Smart kit 1 ————

6The connective wires

group-1 1 See Fig.4-3

74-core shielding wire 1 See Fig.4-3

8Remote controller* 1 ————

9Battery* 2 ————

10 Remote controller

Manual* 1 ————

* These parts can be removed, which have been

included AC unit.

2. DOWNLOAD AND INSTALL APP

• Android System:

Scan QR Code or go to Google play, search for

'Carrier air conditioner' app and download it.

• iOS System:

Scan QR Code or go to App Store and search for

'Carrier air conditioner' app and download it.

Android iOS

GB- 3

4. INSTALLATION METHOD

9. Connect the smart port to the wire controller (if

needed)

①Remove the top cover from the gap between the

top cover and bottom by a tool with at head. (See

Fig.4-11)

②Use the connective cable to connect the wire

controller and CN3 of the smart port. (See Fig.4-12)

(refer to the Wire controller manual for details)

CN3

Fig 4-11 Fig 4-12

NOTE:

• Connection for R485 Communication wired

controller.

4. INSTALLATION METHOD

Putty Trap Putty

Fig 4-9

CAUTION

Trap

Avoid the water enter into the smart port, use trap

and putty to seal the connectors of wires during

wiring installation. (Fig. 4-9) When under installation,

reserve certain length of the connecting wire for

convenient to take down the smart port while during

maintenance.

8.Reattach the upper part of the smart port

• After adjusting the upper case and then buckle

the upper case; avoid clamping the wiring during

installation. (Fig 4-10)

Fig 4-10

4. INSTALLATION METHOD

7.Wiring

A. For exposed mounting, two outletting positions.

Top side wire outlet

Bottom side wire outlet Fig 4-7

B. Shielded wiring

Wiring through the wall

Wiring hole and wall hole

Diameter of wall hole:Φ20mm Fig 4-8

4. INSTALLATION METHOD

5. Fasten the back plate of the smart port

• For exposed mounting, fasten the back plate on

the wall with the 3 screws (M4×20) and plugs.

(Fig.4-5)

Back plate

Screws (M4×20)

Fig 4-5

6. Insert the smart kit with slightly strength into the

main PCB of the smart port .(Fig.4-6)

Fig 4-6

GB- 4

7. NETWORK CONFIGURATION

Kindly reminder:

• When the air conditioner entered into WLAN

network setting mode, the remote controller can

not control the AC before the WLAN network

setting nished.

• If there is no setting operation under WLAN

network setting mode, the air conditioner will quit

this mode automatically 8 minutes later, then the

user can control the AC with remote controller

normally.

Add device to the account

Note: The conguration process is different for

Android system and iOS system mobile.

First, open the APP, sign in with the registered

account and password.

If the mobile is Android system, please follow the

process as below, if the mobile is iOS system,

please go to page 10 and follow the process.

7. NETWORK CONFIGURATION

CAUTION

• It is better to log in email box and active

registration account by clicking link in case forget

the password.

• Make sure the mobile connect to the WLAN

network.

• Make sure the mobile WLAN function works

well and can be connected to WLAN network

automatically.

• If the Smart Kit failed to connect to the router,

please conrm the encryption setting of router

should be WPA.

Set Air conditioner into AP mode

①Disconnect the power supply of Air conditioner.

②Connect the power supply of Air conditioner, press

the ‘LED’ button on the remote controller for 7

times continuously.

③ When the display show ‘AP’ and ash, it means

that the Smart Kit has already entered the WLAN

network setting mode.

• Some type of AC do not need the step to be in AP

mode.

6. USER REGISTRATION

• Please ensure the mobile device has connected

to WLAN router. And the router has already

connected to Internet before registration and

network conguration.

[email protected]

Create Account

①Click ‘Create Account’. ②Enter your email

address and

password, and then

click ‘Registration’.

5. SPECIFICATION

Smart Kit Model OSK102/EU-OSK103/

US-OSK103

Standard IEEE802.11b/g/n

Antenna Type Printed PCB Antenna

Frequency WLAN: EU--

2412~2472MHz; US--

2412~2462MHz

Maximum Transmitted

Power

19.8 dBm Max

Operation Temperature 0°C~45°C/32°F~113°F

Operation Humidity 10%~85%

Power Input DC 5V/300mA

GB- 5

7. NETWORK CONFIGURATION

WLAN

family WLAN

⑥Please enter

password.

⑦ Network conguration

is successful.

7. NETWORK CONFIGURATION

④Choose the network

conguration method.

* Note: No need to scan

QR code to complete

conguration.

⑤Choose the “Manual

Setup” method.

7. NETWORK CONFIGURATION

③Follow the above steps to enter “AP” mode.

7. NETWORK CONFIGURATION

Network conguration for Android system mobile

Select Appliance Type

①Press ‘+ Add Device’ ②Select the appliance

you are setting up.

GB- 6

7. NETWORK CONFIGURATION

④Connect to the

Wireless network.

⑤Please enter

password.

7. NETWORK CONFIGURATION

③Follow the above steps to enter “AP” mode.

7. NETWORK CONFIGURATION

Network conguration for iOS system mobile

Select Appliance Type

①Press ‘+ Add Device’ ②Select the appliance

you are setting up.

7. NETWORK CONFIGURATION

Recommend Name (Support by ECHO):

Self-defining Name (Cannot support by ECHO):

Living Room

Dining Room

Kitchen

Master bedroom

Children bedroom

Study

Guest bedroom

Storage room

Air Condtioner40C8

Device name Save

Air Condtioner40C8

⑧ Conguration

Success, you can

choose the name as

you like.

⑨Finally, you can see

the device on the list.

GB- 7

8. HOW TO USE APP

③Touch the logo in the

center to turn on the

air conditioner.

④Now, the air

conditioner is available

to be controlled by

APP.

NOTE:

• Not all the functions of the APP are available for

every air conditioner. For example: ECO is only

available for inverter model, vertical louver swing

is only available for the models with vertical

swing motor.

8. HOW TO USE APP

Please ensure both mobile device and air conditioner

are connected to the Internet before using app to

control the air conditioner via internet, please follow

the next steps:

[email protected]

Air Condtioner40C8

①Enter user account

and password, Click

"Sign in ".

②Select the target air

conditioner to enter

the main control

interface.

7. NETWORK CONFIGURATION

Air Condtioner40C8

⑧Finally, you can

see the device

on the list.

NOTE:

• When nishing network

conguration, APP will

display success cue words

on the screen.

• Due to different internet

environment, it is possible

that the device status still

display “ofine” and can

not access to the operation

interface.

If this situation occurs, user

should pull the device list

down and refresh the status

become “online”.

If it does not work, turn off

the AC power and turn on it

again.

7. NETWORK CONFIGURATION

Recommend Name:

Custom Name:

Living Room

Dining Room

Kitchen

Master bedroom

Children bedroom

Study

Guest bedroom

Storage room

Air Condtioner40C8

Device name Save

WLAN

⑥ Network conguration

is successful.

⑦ Conguration

Success, you can

choose the name as

you like.

GB- 8

9. SPECIAL FUNCTIONS

Including: Timer on, Timer off, 8°C Heat, Sleep,

Check.

NOTE:

●The Smart Kit will check the software program in

the air conditioner control parts, only show the

available functions on the APP.

Timer on/ Timer off

Weekly, user can make an appointment to turn on

or turn off the AC on specic time. User can choose

circulation to keep the AC under schedule control

every week.

8. HOW TO USE APP

ON/OFF:

Press this button to turn on or turn off the unit.

Mode selection:

Press this button to change the running mode (COOL, HEAT,

DRY, FAN, AUTO)

Fan speed selection:

Press this button to change the fan speed High fan 3 layer

Med fan 2 layer Low fan 1 layer

Turbo: *

Press this button to active turbo mode. (Only available for

cool running)

IntelligentEye *

Press these button to select wind ow follow people or wind

ow away from

people.

ECO : *

Press this button to active ECO mode.

Comfort Humidity : *

Press this button to detect humidity level of the room.

Vertical louvers swing: *

Press this button to active the vertical louvers swing.

Horizontal louvers swing:

Press this button to active the horizontal louvers swing.

Celsius / Fahrenheit:

Press this button to change the temperature unit showing on

the AC display.

Setting temperature:

Touch the screen near the temperature, slip up & down to

change the

temperature, do not loosen nger until the number reach to

target.

* Model dependent

8. HOW TO USE APP

Main interface and functions

Device Name

Running mode

Setting

temperature

Fan speed

ON/OFF

Intelligent Eye

Horizontal

louvers swing

Vertical

louvers swing

Celsius /

Fahrenheit

ECO

mode

Special

functions

Mode

selection

Fan speed

selection

Turbo

Dehumidity

Page selection

GB- 9

9. SPECIAL FUNCTIONS

Share Device

The air conditioner can be controlled by multi-

users at the same time by Share Device function.

① ②

Now please ask your family to use APP

on their own mobile phones to scan

this QR code and share this device to

them.

①Click “Share device” ②Let the others to scan

the displayed QR

code.

9. SPECIAL FUNCTIONS

Check

This function can simply check the AC running

status.

When nishing this procedure, it can show

the normal items, abnormal items, and detail

information.

9. SPECIAL FUNCTIONS

Sleep

This funciton can customize comfortable sleep by

setting target temperature.

Edit

Young

Older

Children

9. SPECIAL FUNCTIONS

8°C Heat

In this mode, the air conditioner will run under 8°C

Heat. When people go outisde, this function can

protect the furniture from frost damage.

Tabla de contenidos

Idiomas:

Otros manuales de Accesorios para aire acondicionado de Carrier

Carrier

Carrier KGACK0101HCK Manual de usuario

Carrier

Carrier OSK102/EU Instrucciones de funcionamiento

Carrier

Carrier 324423-751 Manual de usuario

Carrier

Carrier 52S Wall Thermostat Interface Retrofit Kit Manual de usuario

Carrier

Carrier 48FP Instrucciones de funcionamiento

Carrier

Carrier 50TJ500817 Manual de usuario

Carrier

Carrier CRECOMZR001A02 Instrucciones y recetas

Carrier

Carrier GEMINI SELECT 38APD025-130 Manual de usuario

Carrier

Carrier 30HWA Series Manual de usuario

Carrier

Carrier 52S series Manual de usuario

Carrier

Carrier CPLPCONV006A00 Manual de usuario

Carrier

Carrier 30GX900006 Manual de usuario

Carrier

Carrier CRECOMZR 004A01 Series Manual de usuario

Manuales populares de Accesorios para aire acondicionado de otras marcas

Unitary products group

Unitary products group 2CE Series Manual de usuario

Qlima

Qlima EU-ODZ104 Manual de usuario

EMI

EMI 550000565 Manual de usuario

ActronAir

ActronAir MRE-035AS Manual de usuario

Mitsubishi Electric

Mitsubishi Electric RCN-K-E Manual de usuario

Tecnosystemi

Tecnosystemi smart clima INFINITY BLUE RIVER Manual de usuario

EINHELL

EINHELL Hot Air Stop Manual de usuario

ActronAir

ActronAir ERQ2-16AS Manual de usuario

Sharp

Sharp AZ-F900E Manual de usuario

Danby

Danby DPSL120B1W Manual de usuario

INABA DENKO

INABA DENKO DSH-UP20E20E-07 Manual de usuario

ActronAir

ActronAir LM7-2W Manual de usuario

Bard

Bard WGEIFM-3C Manual de usuario

Toro

Toro LT3240 Manual de usuario

Johnson Controls

Johnson Controls PD-75A Manual de usuario

Trane

Trane BAYECON104AA Instrucciones de montaje

Fujitsu

Fujitsu UTZ-KXGC Manual de usuario

INABA DENKO

INABA DENKO TK Series Manual de usuario