Carmelli NG1016M Manual de usuario
Please Do Not Hesitate to
Contact Our Consumer Hotline
at 800-759-0977
with Any Questions That May
Arise During Assembly or
Use of This Product!
Ver. 0916
ACCELERATOR 4in1 MULTI-GAME
TABLE ASSEMBLY INSTRUCTIONS
NG1016M
THANK YOU!
Thank you for purchasing this product. We work around the clock and around the globe to ensure
that our products maintain the highest possible quality. However, in the rare case of issues during
assembly or use of this product, please contact our Consumer Hotline at 800-759-0977 for immediate
assistance before contacting your retailer. Please read the warranty information at the back of these
assembly instructions for further details.
2
CARE AND USE
1. This product is intended for INDOOR use only.
2. Do NOT drag the table when moving it, as this will damage the legs.
ASSEMBLY TIPS
1. Find a clean, level surface to begin the assembly of your game table. We recommend that two adults
work together to assemble this game. You may want to carefully cut or tear the four corners of the box
so that the bottom of the box can be used as your work surface.
2. Remove all of the contents from box and verify that you have all of the parts shown on the Parts
List before you begin assembly. Note: Some parts may be pre-installed or pre-assembled.
3. Some figures or drawings may not look exactly like product.
4. When installing parts that have more than one screw or bolt, hand tighten all screws or bolts
in place before final tightening with screwdriver or wrench.
5. Electric screwdrivers may be helpful during assembly; however, please set a low torque and use
extreme caution because screws may be stripped or overtightened, resulting in damaged parts, if the
electric screwdriver’s torque is set too high.
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETYINSTRUCTIONS CAREFULLY.
CHOKE HAZARD - THIS ITEM MAY CONTAIN SMALL BALLS AND PARTS
NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS
IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.
For replacement parts please call 800-759-0977. 3
Parts List
9/16
ACCELERATOR 4in1 MULTI-GAME - NG1016M
Illustrations Not to Scale
P1 NGP6000
1 pc
TABLE BODY
P3 NGP6002 P4 NGP6003
2 pcs
LEG PANEL 1 pc
TABLE TENNIS
WHITE BOARD LEG LEVELER
4 pcs
P2 NGP6001
4 pcs
LEG
P5 NGP6004
P6 NGP6005
2 pcs
BASKETBALL ARM
P8 NGP6007 P9 NGP6008
1 pc
BASKETBALL RIM 1 pc
BASKETBALL BALL RETURN NET
1 pc
P7 NGP6006
1 pc
BACKBOARD
P10 NGP6009
P11 NGP6010
2 pcs
STRIKER
P13 NGP6012 P14 NGP6013
1 pc
TABLE TENNIS NET 2 pcs
TABLE TENNIS POSTS TABLE TENNIS BALL
2 pcs
P12 NGP6011
2 pcs
PUCK
P15 NGP6014
P16 NGP6015
2 pcs
TABLE TENNIS PADDLE
P18 NGP6017 P19 NGP6018*
1 pc
ERASER 2 pcs
1/4”x3/4” BOLT 26mm BOLT
4 pcs
P17 NGP6016
2 pcs
MARKER
P20 NGP6018*
P21 NGP6018*
4 pcs
NUT
P23 NGP6018* P24 NGP6018*
4 pcs
1/4”x1” BOLT 12 pc
1/2” SCREW AIR PUMP
1 pc
P22 NGP6018*
22 pcs
WASHER
P25 NGP5035
P26 NGP6018*
1 pc
ALLEN WRENCH
A
B
16 pcs
1/4”x1” BOLT
P27 NGP6018*
*Items included in Hardware Pack, NGP6018
BLOWER MOTOR
P28 NGP50801
1 pc
(Pre-installed on Table)
4
THANK YOU!ASSEMBLY INSTRUCTIONS
1. Attach one LEG P2 to each corner of the TABLE BODY P1 using BOLTS P27 and WASHERS P22.
2. Attach LEG PANELS P3 to inside of LEGS P2 on each end of table using SCREWS P24 in pre-drilled holes.
3. Install one LEG LEVELER P5 on bottom of each Leg. Carefully turn table over onto legs.
4. Attach BASKETBALL RIM P8 onto BACKBOARD P7 using SCREWS P24 in pre-drilled holes.
P27
P27
5
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
5. Attach two BASKETBALL ARMS P6 onto end of TABLE BODY P1 using BOLTS P23 and WASHERS P22.
6. Attach BACKBOARD P7 onto BASKETBALL ARMS P6 using four BOLTS P20 and NUTS P21 as shown.
6
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
7. Attach the BALL RETURN NET P10 to the two BASKETBALL ARMS P6 using the Velcro strips as shown.
8. Attach the black straps on the front sides of the BALL RETURN NET P10 to the sides of table using
BOLTS P19 and WASHERS P22.
P22
7
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
Simply remove the basketball assembly to play AIR HOCKEY.
Place the dry erase board on top of the table
to create a DESK or ART/CRAFT AREA.
Flip the dry erase board over, insert the net posts
and net, and you’re ready for TABLE TENNIS.
180-DAY LIMITED WARRANTY
This product is warranted to the original purchaser to be free from defects in material or workmanship
for a period of 180 days from the date of the original retail purchase.
This warranty does not cover defects or damage due to improper installation, alteration, accident or
any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,
abuse or negligence will void this warranty. This warranty does not cover scratching or damage that
may result from normal usage.
This product is not intended for institutional or commercial use; the manufacturer does not assume
any liability for such use. Institutional or commercial use will void this warranty.
This warranty is nontransferable and is expressly limited to the repair or replacement of the defective
product. During the warranty period, the manufacturer shall repair or replace defective parts at no
cost tothe purchaser. Shipping charges and insurance are not covered and are the responsibility of
the purchaser. Labor charges and related expenses for removal, installation or replacement of the
product or components are not covered under this warranty.
The manufacturer reserves the right to make substitutions to warranty claims if parts are unavailable
or obsolete.
The manufacturer shall not be liable for loss of use of the product or other consequential or incidental
costs, expenses or damages incurred by the consumer of any other use. The user assumes all risk of
injury resulting from the use of this product.
This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of
. Neither the manufac-
turer nor any of its representatives assumes any other liability in connection with this product.
All warranty claims must be made through the retailer where the product was originally
purchased. A purchase receipt or other proof of date of purchase will be required to process
all warranty claims. The model number and part numbers found within the assembly
instructions will be required when submitting any parts requests or warranty claims.
For further warranty information or inquiries, please call 800-759-0977
8
Ver. 0916 NG1016M
Contactez notre
service à la clientèle au
800-759-0977
avec des questions sur le montage
ou l'utilisation de ce produit.
TABLE MULTI-JEUX
ACCELERATOR 4 en 1
INSTRUCTIONS D’ASSEMBLAGE
2
MERCI!
Merci d’avoir acheté notre produit. Nous travaillons 24 heures sur 24, partout dans le monde, à garantir
que nos produits sont de la meilleure qualité possible. Toutefois, dans les rares cas de problèmes lors
du montage ou de l'utilisation de ce produit, se il vous plaît communiquer avec notre service à la clientèle
au 800-759-0977 pour une aide immédiate avant de contacter votre revendeur. Pour obtenir de plus amples
renseignements, veuillez lire l'information relative à la garantie au verso de ce guide d’instructions.
ENTRETIEN ET USAGE
1. Ce produit doit être utilisé À L’INTÉRIEUR seulement.
2. NE JAMAIS déplacer la table en la traînant, cela pourrait endommager les pieds.
INSTRUCTIONS D’ASSEMBLAGE
1. Trouver une surface propre et plane, pour commencer le montage de votre table de jeu. La table
s’assemble à l’envers pour être ensuite retournée sur ses pieds, une fois l’assemblage complété.
Cette table est lourde et nécessite au moins deux adultes forts pour la soulever et la retourner.
2. Retirez le contenu de la boîte, avant de commencer l’assemblage, assurez-vous d’avoir toutes
les pièces telles que listées et illustrées au tableau d’identification. Avis : certaines pièces sont
préassemblées ou préinstallées.
3. Certaines illustrations ou dessins peuvent ne pas ressembler au produit que vous avez acheté.
4. Quand vous fixez en place une pièce avec plus d’une vis ou écrou, veuillez, en premier, les
visser à la main et terminer la fixation avec un tournevis ou une clé.
5. Un tournevis électrique peut être utile lors de l’assemblage, mais veuillez le régler à basse torque
et l’utiliser avec prudence; si la torque est trop élevée, la vis peut se défaire ou être trop serrée.
AVERTISSEMENTS!
LIRE TOUTES LES INSTRUCTIONS D’ASSEMBLAGE ET LES CONSIGNES DE SÉCURITÉ ATTENTIVEMENT.
RISQUE D’ÉTOUFFEMENT – CERTAINS ÉLÉMENTS DU PRODUIT CONTIENNENT
DE PETITES PIÈCES - NE CONVIENT PAS À UN ENFANT DE MOINS DE TROIS ANS.
IMPORTANT! VEUILLEZ LIRE, EN ENTIER, TOUTES LES
INSTRUCTIONS AVANT D’ASSEMBLER VOTRE PRODUIT.
Tabla de contenidos
Idiomas:
Otros manuales de Accesorios de Carmelli
