OFF
A
B
5
4
3
2
1
1.
With the Pager switched
on, move switch 5 to
the left
(away from the belt clip).
2.
This will increase the range
of the Pager from 100M
(in open air),
to approximately 1000M
(in open air).
Operating Range
500M
Increasing system range
It is possible to make the Pager more sensitive when larger areas need to be covered.
OFF
A
B
5
4
3
2
1
1.
With the Pager switched
on, move switch A to
the left
(away from the belt clip).
2.
Vibration Alert
Users can choose between the standard audio alert or a discreet vibration pattern for each event.
123456
The Pager will now vibrate when
a signal is received.
This can be especially useful
in the evening, effectively putting
the Pager into "silent" mode.
Changing the system channel code
NOTE. In most cases it is not necessary to change the system code. However, when one or
more systems are in close proximity, system codes can be used to avoid interference from
other Care Call systems using up to a maximum of 16 channels.
The Pager is supplied with no
system code switches set (system code 1).
For reference this is the factory setting
should you need to re-set the unit.
System codes can be set using
key switches 1 - 4.
The diagram to the right shows the 16
possible combinations.
Be sure that the same system code is set on
all monitors to be used in the system.
NOTE. Care Call receivers have an ON/OFF
switch, Care Call monitors do not.
23456 7 8
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
9 10 1211 13 14 15 16
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
OFF
A
B
5
4
3
2
1
Here we have a Care Call Pager and Mini Monitor set to
system channel 2.
Ensure when setting system channel keys you remember to ignore the
Pagers ON/OFF switch or the equipment will be on different
system channels .
The diagram to the right shows an incorrect attempt to set the system
to channel code 2 (shown as an example to avoid possible confusion).
The correct settings are shown to the left.
OFF
A
B
5
4
3
2
1
1 2 3 4 5 6 7 8
INCORRECT
OFF
A
B
5
4
3
2
1
1 2 3 4 5 6 7 8
CORRECT
